1999 Honda Prelude K&N Parts

Choose your Engine for your 1999 Honda Prelude

4 Cyl 2.2L

Showing 1 - 6 of 6 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1999 Honda Prelude Engine Oil Filter 4 Cyl 2.2L K&N

Oil Filter
H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1999 - Honda Prelude	L	2156	4 Cyl 2.2L	-

76 In Stock

$23.90 CAD

$28.68 CAD

Brand	K&N
Part #	K33HP-1004
Condition	New
Warehouse	B

1999 Honda Prelude Fuel Filter K&N

Fuel Filter
OD 2.438 in.; Length 2.875 in.; Threaded Inlet/Outlet
K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
In-Line Gas Filter
Product Attributes:
- Automotive Item Grade: High Performance
- Package Contents: 1 Fuel Pump, 4 Washers
- WARNING CA Proposition 65: No
- Length: 2.875 In. (73mm)
- Item Weight: 0.700 Lbs. (0.3 Kg)
- Package Quantity: 1
- Product Box Height: 5.000 In. (127mm)
- Filter Material: Cellulose Media
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- Inlet Type: Single
- Outside Diameter: 2.438 In. (62mm)
- Fitting Type: Not Applicable
- Package Type: Box
- Package Content: 1
- Outlet Type: Single
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.

This Part Fits the Following OEM/Substitute Numbers:

0430995, 0450905916, 16010S01A30, 16010S01A31, 16010S01A32, 16010ST5931, 16010ST5932, 16010ST5933, 16010ST5E02, 23559, 25176324, 25176325, 3162100, 33559, 3559, 523, 523MP, 5862022080...VIEW MORE

Additional Fitment Information:

Vehicle
1999 - Honda Prelude

59 In Stock

$32.78 CAD

$39.34 CAD

Brand	K&N
Part #	K33PF-1200
Condition	New
Warehouse	B

1999 Honda Prelude Air Cleaner Assembly K&N

Universal Clamp-On Air Filter
Round Tapered; Clamp-On; Base OD 6 in.; Flange L-2 in.; Flange ID-2.75 in.; Centered; Rubber End; Filter Length 6.5 in.
Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
Universal Air Cleaner Assembly
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 2.000 In. (51mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 6.000 In. (152mm)
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Machine Washable: Yes
- Product Box Height: 11.000 In. (279mm)
- Filter Material: Cotton Gauze
- Product Box Width: 6.380 In. (162mm)
- Product Box Length: 6.380 In. (162mm)
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Item Height: 6.500 In. (165mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Package Content: 1
- Top Style: Rubber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Package Contents: 1 Air Filter
- Top Material: None
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- CARB/Air Horn Diameter: 2.750 In.
- Package Quantity: 1
- Shape: Round Tapered
- Top Outside Diameter: 5.000 In. (127mm)
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.24 Oz (37 Ml)
- Flange Inside Diameter: 2.750 In. (70mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Flange Type: Centered
- Package Type: Box
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Additional Fitment Information:

Vehicle
1999 - Honda Prelude

Brand	K&N
Part #	RU-4870
Condition	New
Warehouse	C

1999 Honda Prelude Air Intake Kit K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 7.12 HP At 6821 RPM;CARB E.O. D-269-30
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-1302TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Prelude models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1302TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle
1999 - Honda Prelude

Brand	K&N
Part #	69-1302TP
Condition	New
Warehouse	C

1999 Honda Prelude Air Filter K&N

Replacement Air Filter
Panel; H-.875 in.; L-13.125 in.; W-6 in.
K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Width: 6.000 In.
- Item Weight: 1.100 Lbs. (0.5 Kg)
- Machine Washable: Yes
- Product Box Height: 13.560 In. (345mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 7.720 In. (196mm)
- Outside Diameter: Oem
- Item Height: 0.875 In. (22mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Package Content: 1
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Outside Width: 6.000 In. (152mm)
- Package Contents: 1 Air Filter
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.1 Oz (33 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 13.125 In. (333mm)
- Package Type: Box
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:

17220P13000, 19904, 46110, 6110, 88110, A1261, A1296C, A24730, AF138, AF4730, AF7868, C22562, C3327, CA7369, FB19904, PA4730, RAF193, SA7369...VIEW MORE

Additional Fitment Information:

Vehicle
1999 - Honda Prelude

Brand	K&N
Part #	33-2090
Condition	New
Warehouse	C

1999 Honda Prelude Air Intake Kit K&N

Performance Air Intake System
Includes Blue; Air Filter/Water Repellent DryCharger Filter Wrap/Polished Tubing; Estimated Horsepower Gain 7.12 HP At 6821 RPM;CARB E.O. D-269-30
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish.
Typhoon Complete Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 7.12 Hp @ 6821 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4870
- Item Weight: 8.000 Lbs. (3.6 Kg)
- RPM: 6821
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 30.000 In. (762mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 16.000 In. (406mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Performance Air Intake System
The KN 69-1302TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Prelude models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1302TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.