1999 Volvo Parts

Choose a Model for your 1999 Volvo


Showing 1 - 10 of 48 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.25
    • Overall Length: 15
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 11
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Volvo S80 L 2798 6 Cyl 2.8L -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal OEM GRADE Federal (Excludes California)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.25
    • Overall Length: 15
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 11
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Volvo S80 L 2798 6 Cyl 2.8L -

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.5
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.5

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Volvo V70 L 2319 5 Cyl 2.3L -

Professional Parts Sweden
Additional Fitment Information:
Vehicle
1999 - Volvo S80
Additional Fitment Information:
Vehicle Position
1999 - Volvo S80 Rear

APA/URO Parts
  • Kit

    This Kit is available as a service solution for damaged or missing hangers. This kit will allow a repair to be made without replacing the entire muffler/ exhaust system. This kit is designed to fit directly on the pipe without any welding. Install the new clamp in place of the old hanger. Remaining pieces of the old hanger may need to be cut off before the new part can be installed.
  • This kit will replace a damaged or missing muffler hanger bracket without the need to replace the entire muffler. The new hanger bracket includes a collar that slides over the exhaust pipe and clamps in place of the original bracket. Be sure to remove any remaining parts of the old bracket before installing the new bracket.
  • Repair Kit

Additional Fitment Information:
Vehicle Position
1999 - Volvo S80 Rear

APA/URO Parts
  • This kit will replace a damaged or missing muffler hanger bracket without the need to replace the entire muffler. The new hanger bracket includes a collar that slides over the exhaust pipe and clamps in place of the original bracket. Be sure to remove any remaining parts of the old bracket before installing the new bracket.
  • Repair Kit

Additional Fitment Information:
Vehicle
1999 - Volvo S80

Victor Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Aspiration
1999 - Volvo V70 Naturally Aspirated

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • CARB Executive Order D-193-119 Engine Family Number XVVXV2.78EN2 ; Certification Level : TLEV OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • 2.25in. Universal California OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.25
    • Overall Length: 15
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: California / Carb Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 11
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Volvo S80 L 2798 6 Cyl 2.8L -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • CARB Executive Order D-193-119 Engine Family Number XVVXV2.43AW2 ; Certification Level : TLEV OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • 2.25in. Universal California OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.25
    • Overall Length: 15
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: California / Carb Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 11
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Volvo V70 L 2435 5 Cyl 2.4L -
Showing 1 - 10 of 48 products

Loading...