Shop By Product Matching "MSD 8200"

Choose a Year for your vehicle

2024 2023 2022 2021 1970 1967 1966 1965

Showing 1 - 7 of 7 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2021 BMW M3 Skid Plate 6 Cyl 3.0L Mishimoto

Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Product Attributes:
- SellingPoint04: Retains Air Dam For Optimized Pressure Differential And Airflow Through Oil Cooler Core
- SellingPoint05: Protective Crosscuts Allow Ample Airflow While Blocking Debris
- TechSpec Overall Height (Inches): 24
- SellingPoint06: Installs In Under An Hour With No Drilling Or Cutting Required
- SellingPoint07: Includes Everything Needed For Installation
- SellingPoint01: Direct Fit For 2021+ Bmw G8x M2/m3/m4
- SellingPoint02: Protects Engine And Oil Cooler From Damage
- SellingPoint03: Constructed From High-strength Aluminum And Powdercoated For A Durable, Corrosion-resistant Finish
- TechSpec Length (Inches): 35.8
- TechSpec Minimum Yield Strength: N/a
- TechSpec Chassis Codes: G80--g82--g83--g87
- SellingPoint08: Fits Both Stock And Mishimoto Oil Coolers
- SellingPoint09: Recessed Mounting Hardware Provides Smooth Surface To Avoid Snagging On Obstacles Or Shearing Mounting Bolts
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Fitment With Competition Sport (cs) Models May Require Enlarging Holes In The Front Splitter
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 5052-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Bmw M3 I6 3.0l Twin-turbo 2021+--bmw M3 Competition I6 3.0l Twin-turbo 2021+--bmw M3 Competition Sport I6 3.0l Twin-turbo 2023+--bmw M4 I6 3.0l Twin-turbo 2021+--bmw M4 Competition I6 3.0l Twin-turbo 2021+--bmw M2 I6 3.0l Twin-turbo 2023+
- TechSpec Includes: (1) Mishimoto Aluminum Skidplate--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
Features:
- Direct fit for 2021+ BMW G8X M2/M3/M4
- Protects engine and oil cooler from damage
- Constructed from high-strength aluminum and powder coated for a durable, corrosion-resistant finish
- Retains air dam for optimized pressure differential and airflow through oil cooler core
- Protective crosscuts allow ample airflow while blocking debris
- Installs in under an hour with no drilling or cutting required
- Includes everything needed for installation
- Fits both stock and Mishimoto oil coolers
- Recessed mounting hardware provides smooth surface to avoid snagging on obstacles or shearing mounting bolts
- Mishimoto Lifetime Warranty
The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road’s surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2021 - BMW M3	L	2993	6 Cyl 3.0L	Base	-

6 In Stock

$739.24 CAD

$887.09 CAD

Brand	Mishimoto
Part #	M1NMMSD-G80-21WBK
Condition	New
Warehouse	B

UPC: 840197712504

Wiring Harness Connector MSD

Universal

MSD Non-Insulated Connector Kit
MSD Non-Insulated Connector Kit; 150 Piece; Includes Butt Connectors/Female And Male Disconnectors/Ring Terminals/Spade Terminals; Fits Wire Sizes 14-22 AWG;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Material For Ring And Spade Terminals: Tin Plated Copper
- Material For Butt And Female/Male Connectors: Tin Plated Brass
- Wire Sizes From 14-22 AWG
- 150 Piece Kit
Wiring the best ignition on the market requires quality electrical connectors. MSD now offers various electrical connector and heat shrink kits for all your wiring needs. Our offerings include Weathertight, Insulated, Non-insulated, Superseal, Open Barrel, Solder Sleeve Wire Splice and Heat Shrink kits. Proper electrical connections ensure safety, reliability and maximum current flow to all your cars electronics. Need crimpers to complete the job? Be sure to check out our full line of specialty crimping tools and wire your car like a pro.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

1 In Stock

$32.99 CAD

$39.59 CAD

Brand	MSD
Part #	M468196MSD
Condition	New
Warehouse	B

Audio Noise Suppressor MSD

Universal

Noise Filter Capacitor
Noise Filter Capacitor; 26 KUFD;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Recommended for use on MSD 7 and 8 installations
- Prevents interference from EMI noise
If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. When the MSD draws current, it will draw through the Noise Filter instead of directly from the battery, so all other accessories that operate off 12 volts, like the radio, fuel pump, or the engine computer, will be unaffected by the MSD.The Noise Filter will also prevent damage to the MSD during jump-starts and will keep a vehicles 12-volt line clean by removing any voltage and current surges that could interfere with the operation of some MSD accessories such as the Soft Touch Rev Control or the Two Step Module Selector. It is recommended that the Noise Filter be used on installations with the MSD 7 and 8 Series Ignitions to prevent this interference.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

4 In Stock

$100.08 CAD

$120.10 CAD

Brand	MSD
Part #	M468830MSD
Condition	New
Warehouse	B

Ignition Performance Module MSD

Universal

Power Grid Ignition System™ Controller
Power Grid Ignition System™ Controller; Not Legal For Use Or Sale On Pollution Controlled Vehicles; Red;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- USB Connection For Ease Of Programming
- Timing Based On Engine RPM And Gear Value
- Advanced individual cylinder timing based on gear or time
- Five Retard Stages For Nitrous
- Four steps of rpm limits for burnout
- spool
- launch and overrev
- Output switch set on rpm
- pressure or time
- Shift Light Settings For Each Gear
- Ignition Data Acquisition Accepts Multiple Runs
- Crank Trigger system highly recommended
The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing. The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products. The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units! The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware. NOTE: To use any modules with the Power Grid Ignition System, PN 7720 and 7730, users MUST plug the modules into a 4-Connector CAN-Bus Hub PN 7740 to be attached to the Power Grid System Controller.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

8 In Stock

$972.63 CAD

$1,167.16 CAD

Brand	MSD
Part #	M467730
Condition	New
Warehouse	B

Engine Timing Tape MSD

Universal

Timing Tape
Timing Tape; For Harmonic Balancer;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Timing tape for factory or aftermarket harmonic balancers
- Size For Harmonic Balancer
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst-case scenario). Recognizing the importance of timing, MSD offers these Timing Tapes. The MSD Timing Tape comes with eight different tapes to fit common balancers ranging from 5.25 to 8 in diameter. The tapes are marked off in one-degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on tough, chemical-resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical as the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

114 In Stock

$17.48 CAD

$20.98 CAD

Brand	MSD
Part #	M468985
Condition	New
Warehouse	B

1967 Buick Electra Ignition Coil 8 Cyl 7.0L MSD

w/Ballast; Hardware; Chrome;Legal For Non-Emissions Controlled Vehicles Or For Race Use 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
Blaster 2 Ignition Coil; w/Ballast; Hardware; Chrome;
Blaster 2 Ignition Coil
Product Attributes:
- Spark Duration: 350 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 8 Mh
- Maximum Voltage: 45000
- Peak Current: 140 Ma
- Primary Resistance: .700 Ohms
- Secondary Resistance: 4.5k Ohms
Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- Ballast Resistor Required If Used w/Stock Points Ignition
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Chrome Metal Canister Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Buick Electra	V	-	8 Cyl 7.0L	430

Brand	MSD
Part #	M468200MSD
Condition	New
Warehouse	B

1967 Buick Electra Ignition Coil 8 Cyl 7.0L MSD

w/Ballast; Hardware; Chrome;Legal For Non-Emissions Controlled Vehicles Or For Race Use 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
Blaster 2 Ignition Coil; w/Ballast; Hardware; Chrome;
Blaster 2 Ignition Coil
Product Attributes:
- Spark Duration: 350 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 8 Mh
- Maximum Voltage: 45000
- Peak Current: 140 Ma
- Primary Resistance: .700 Ohms
- Secondary Resistance: 4.5k Ohms
Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- Ballast Resistor Required If Used w/Stock Points Ignition
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Chrome Metal Canister Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.