1957 Land Rover Parts

Choose a Model for your 1957 Land Rover


Showing 1 - 10 of 15 products
Image
SKU
Product
Rating
Price

Rampage
  • 7 in. Round Assemblies; H4 55/60W Bulbs; Cast Housing; Clear Glass Lens; Meets DOT/SAE; Pair
  • Halogen Headlight Conversion Kit; 7 in. Round Assemblies; H4 55/60W Bulbs; Cast Housing; Clear Glass Lens; Meets DOT/SAE; Pair;
  • Halogen Headlight Conversion Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: Yes
  • Features:
    • Multi Surface Reflectors and Clear Glass Lens
    • Die Cast Aluminum Housing Quickly Dissipates Heat
    • Produces A Sixty Percent More Luminous Beam
    • Complex Reflector For Wider/Longer Beam Pattern
    • Sold In Pairs
    • Compatible With Most Factory Harnesses
  • Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.

Additional Fitment Information:
Vehicle
1957 - Land Rover Land Rover

Prestone
  • Prestone Amam Gen 2 50/50 6/1 GAL
  • Extended Life 50/50, Ready to Use Prediluted
  • Product Attributes:
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: No Dilution Required
    • Phosphate Free: Yes
    • Boiling Point at 50 50 Mixture: 229
  • for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1957 - Land Rover Land Rover

Prestone
  • Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
  • Extended Life, Full Strength Concentrate
  • Product Attributes:
    • Biodegradable: No
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: 5 To 7
    • Phosphate Free: Yes
    • Ethylene Glycol: Yes
    • Boiling Point at 50 50 Mixture: 229
  • Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1957 - Land Rover Land Rover

Autolite
  • Autolite 403 Copper Resistor Spark Plug
  • OE Style; .030 Gap
  • Copper Resistor Spark Plug
  • Product Attributes:
    • Center Electrode Design: Standard / Regular
    • Seat Type: Flat
    • Electrical Terminal Type: Removable Nut
    • Ground Electrode Tip Material: Nickel
    • Center Electrode Core Material: Copper
    • Resistor Type: Yes
    • Insulator Material: Ceramic
    • Hex Size:
      • 13/16"
      • 21
    • Reach:
      • 0.750
      • 19.5
    • Center Electrode Tip Material: Nickel
    • Ground Electrode Tip Design: Tapered
    • Insulator Type: Short
    • Pre-Gap Size:
      • 0.034
      • 0.90
    • Resistance: 5000
    • Ground Electrode Core Material: Nickel
  • Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
104, 3041, 43N, 906, AG2

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Land Rover Land Rover L 2286 4 Cyl 2.3L 140

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Land Rover Land Rover L 1996 4 Cyl 2.0L 122

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Land Rover Land Rover L 1996 4 Cyl 2.0L 122

Pacer Performance
  • Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
  • Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
  • 2 - 1/2" Extension Heavy Duty Steel Reinforced
  • Product Attributes:
    • Width EA: 3.5
    • Length EA: 58
    • Height EA: 1 3/8
  • Features:
    • Flexable UV Resistant PVC Rubber
  • each piece measures 58" in length. Includes mounting hardware and instructions.

Additional Fitment Information:
Vehicle Region
1957 - Land Rover Land Rover United States

Pacer Performance
  • Flexy Flare Rubber Fender Extensions Heavy Duty No-Lip, 2-1/2" x 58" Pair
  • Flexy Flare Rubber Fender Extensions Heavy Duty No-Lip, 2-1/2" x 58" Pair
  • 2 - 1/4" Extension No-Lip Side Mount
  • Product Attributes:
    • Width EA: 2.25
    • Length EA: 58
    • Height EA: 1 7/8
  • Features:
    • Flexable UV Resistant PVC Rubber
  • includes mounting hardware and instructions.

Additional Fitment Information:
Vehicle Region
1957 - Land Rover Land Rover United States

Pacer Performance
  • Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
  • Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
  • 2 - 1/2" Extension Heavy Duty Non Reinforced
  • Product Attributes:
    • Width EA: 3.5
    • Length EA: 58
    • Height EA: 1 3/8
  • Features:
    • Flexable UV Resistant PVC Rubber
  • Pacers Universal Flexy Flare Rubber Fender Extenders are an inexpensive way to protect paint and body panels from dirt, rocks and road debris. Constructed of heavy duty 1/4" thick EPDM rubber, they include a built-in curvature to maintain their form and shape without distorting. These extend the fender a full 2 1/2" using a bolt on design for long lasting durability. Sold in a 4 piece kit, each piece measuring 58" in length. Includes mounting hardware and instructions.

Additional Fitment Information:
Vehicle Region
1957 - Land Rover Land Rover United States

Pacer Performance
  • Flexy Flare Rubber Fender Extensions Standard Duty, 2-1/2" x 58", 4 Piece Kit
  • Flexy Flare Rubber Fender Extensions Standard Duty, 2-1/2" x 58", 4 Piece Kit
  • 2 - 1/2" Extension Standard Duty
  • Product Attributes:
    • Width EA: 3.5
    • Length EA: 58
    • Height EA: 1 3/8
  • Features:
    • Flexable UV Resistant PVC Rubber
  • Pacers Universal Flexy Flare Rubber Fender Extenders are an inexpensive way to protect paint and body panels from dirt, rocks and road debris. Constructed of heavy duty 1/8" thick EPDM rubber, they include a built-in curvature to maintain their form and shape without distorting. These extend the fender a full 2 1/2" using a bolt on design for long lasting durability. Sold in a 4 piece kit, each piece measuring 58" in length. Includes mounting hardware and instructions.

Additional Fitment Information:
Vehicle Region
1957 - Land Rover Land Rover United States
Showing 1 - 10 of 15 products

Loading...