2001 Jeep Parts


Showing 1 - 10 of 5359 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Gasket Included: No
    • Outlet Gasket Included: Yes
    • Inlet Diameter: 2.5
    • MFWeb: Yes
    • Heat Shield Attached: Yes
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Oval
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Outlet Diameter: 2.5

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Jeep Wrangler L - Rear 6 Cyl 4.0L 242

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Gasket Included: No
    • Outlet Gasket Included: Yes
    • Inlet Diameter: 2.5
    • MFWeb: Yes
    • Heat Shield Attached: Yes
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Oval
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Outlet Diameter: 2.5

Additional Fitment Information:
Vehicle Block CC Engine CID
2001 - Jeep Wrangler L - 4 Cyl 2.5L 150

Bushwacker
  • 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.5 in.; Textured Finish; Black
  • Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.5 in.; Textured Finish; Black;
  • Cut-Out™ Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: Yes
  • Features:
    • Installation Drilling And/Or Cutting Required
    • Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
    • Limited Lifetime Warranty
    • Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
    • Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
    • Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
    • 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
    • Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
  • For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.

Additional Fitment Information:
Vehicle Position Doors Sub Model
2001 - Jeep Cherokee Front and Rear 4 SE

Bushwacker
  • Cut-Out™ Fender Flares
  • 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.5 in.; Textured Finish; Black
  • Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.5 in.; Textured Finish; Black;
  • Cut-Out(TM) Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: Yes
  • Features:
    • Installation Drilling And/Or Cutting Required
    • Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
    • Limited Lifetime Warranty
    • Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
    • Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
    • Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
    • 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
    • Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
  • For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.

Additional Fitment Information:
Vehicle Position Doors Sub Model
2001 - Jeep Cherokee Front and Rear 4 Sport

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
2001 - Jeep Grand Cherokee Rear

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Wrangler TJ (Square Tube Frame
  • 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 35 Minutes
  • CURT 13408 Class 3 Trailer Hitch; 2-Inch Receiver; Square Tube Frame; Fits Select Jeep Wrangler TJ
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 35 Minutes
    • WC Tongue Weight: 400
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Wrangler TJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Jeep TJ L - Rear 4 Cyl 2.5L 150

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Wrangler TJ (Round Tube Frame)
  • 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 13430 Class 3 Trailer Hitch; 2-Inch Receiver; Round Tube Frame; Fits Select Jeep Wrangler TJ
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 30 Minutes
    • WC Tongue Weight: 400
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Wrangler TJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Jeep TJ L - Rear 6 Cyl 4.0L 242

Bushwacker
  • 4 pc.; Front Tire Coverage 6 in.; Front Height 4 in.; Rear Tire Coverage 6 in; Rear Height 4 in.; Textured Finish; Black; Factory Hole Mount Design
  • Pocket Style® Fender Flares; 4 pc.; Front Tire Coverage 6 in.; Front Height 4 in.; Rear Tire Coverage 6 in; Rear Height 4 in.; Textured Finish; Black; Factory Hole Mount Design;
  • Pocket Style® Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: No
  • Features:
    • Installs Easily With Little To No Drilling/Trimming Required - All Hardware Is Included
    • Limited Lifetime Warranty
    • Precision Engineered For A Perfect Fit That Provides The Rugged Look Of Bolted-On Flares w/o Drilling Through The Body
    • Tire Coverage Varies With Vehicle 0.5 in.- 3 in.
    • Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
    • 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
    • Made Of Durable - Yet Flexible Dura-Flex 2000 ABS Material
  • With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish theyre UV protected so they wont chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, its in the pocket. Pocket Style Fender Flares from Bushwacker.

Additional Fitment Information:
Vehicle Position
2001 - Jeep Wrangler Front and Rear

Bushwacker
  • Pocket Style® Fender Flares
  • 4 pc.; Front Tire Coverage 6 in.; Front Height 4 in.; Rear Tire Coverage 6 in; Rear Height 4 in.; Textured Finish; Black; Factory Hole Mount Design
  • Pocket Style® Fender Flares; 4 pc.; Front Tire Coverage 6 in.; Front Height 4 in.; Rear Tire Coverage 6 in; Rear Height 4 in.; Textured Finish; Black; Factory Hole Mount Design;
  • Pocket Style(R) Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: No
  • Features:
    • Installs Easily With Little To No Drilling/Trimming Required - All Hardware Is Included
    • Limited Lifetime Warranty
    • Precision Engineered For A Perfect Fit That Provides The Rugged Look Of Bolted-On Flares w/o Drilling Through The Body
    • Tire Coverage Varies With Vehicle 0.5 in.- 3 in.
    • Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
    • 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
    • Made Of Durable - Yet Flexible Dura-Flex 2000 ABS Material
  • With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish theyre UV protected so they wont chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, its in the pocket. Pocket Style Fender Flares from Bushwacker.

Additional Fitment Information:
Vehicle Position
2001 - Jeep Wrangler Front and Rear

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Cherokee XJ (Exposed Main Body
  • 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 35 Minutes
  • CURT 13160 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Jeep Cherokee XJ
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 5000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 5000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • WD Tongue Weight: 600
    • Drilling Required: No
    • Install Time: 35 Minutes
    • WC Tongue Weight: 500
    • Weight Distribution: 6000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Jeep Cherokee L - Rear 6 Cyl 4.0L 242
Showing 1 - 10 of 5359 products

Loading...