Chevrolet Blazer Parts

Choose a Year for your Chevrolet Blazer

2023 2022 2021 2020 2019 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1974 1973 1972 1971 1970 1969

Showing 1 - 10 of 7572 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1974 Chevrolet Blazer Coil Spring Set - Front 6 Cyl 4.1L Moog

Coil Spring Set
Heavy Duty Constant Rate Spring
MOOG 6454 Coil Spring Set
Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
  - 13.61
  - 345.70
- Wire Diameter:
  - 0.82
  - 21.00
- Front Spring Compressed Length:
  - 10.00
  - 254.00
- Rear Spring Compressed Length:
  - 10.00
  - 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
  - 13.61
  - 345.70
- Rear Spring Outside Diameter: 5.340
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1974 - Chevrolet Blazer	L	4098	Front	6 Cyl 4.1L	250

6 In Stock

$217.79 CAD

$261.35 CAD


Brand	Moog
Part #	M126454
Condition	New
Warehouse	B

UPC: 080066119434

1974 Chevrolet Blazer Coil Spring Set - Front 8 Cyl 7.4L Moog

Coil Spring Set
Constant Rate Spring
MOOG 6454 Coil Spring Set
Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
  - 13.61
  - 345.70
- Wire Diameter:
  - 0.82
  - 21.00
- Front Spring Compressed Length:
  - 10.00
  - 254.00
- Rear Spring Compressed Length:
  - 10.00
  - 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
  - 13.61
  - 345.70
- Rear Spring Outside Diameter: 5.340
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:

277-2074, 328098, 328099, 328100, 328101, 45H0076, 52049830, 585-1076, 630.66078, 831-6454, 92-6454, CS6454, FCS6454S, SMS6454, U6454P

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1974 - Chevrolet Blazer	V	7439	Front	8 Cyl 7.4L	454

6 In Stock

$217.79 CAD

$261.35 CAD


Brand	Moog
Part #	M126454
Condition	New
Warehouse	B

UPC: 080066119434

1999 Chevrolet Blazer Fender Flare - Front and Rear Bushwacker

Extend-A-Fender® Flares
4 pc.; Front Tire Coverage 2.25 in.; Front Height 3.75 in.; Rear Tire Coverage 2.25 in; Rear Height 4 in.; Smooth Finish; Black
Extend-A-Fender® Flares; 4 pc.; Front Tire Coverage 2.25 in.; Front Height 3.75 in.; Rear Tire Coverage 2.25 in; Rear Height 4 in.; Smooth Finish; Black;
Extend-A-Fender(R) Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
Features:
- Precision Engineered For A Perfect Fit And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus - All Hardware Is Included
- Limited Lifetime Warranty
- Smooth - Contoured Look - These Flares Provide More Protection Than Our Oe Style Flares
- Tire Coverage Varies With Vehicle 1.25 in. - 3 in.
- Whether On-Road Or Off / Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- A Smooth - Contoured Look Which Provides More Protection From Dirt And Debris Than Our OE Style Flares
Youve equipped your vehicle with oversize wheels and tires for serious off-road traction and clearance. Now you need extra tire coverage to protect your rigs body and maybe even comply with local laws. Bushwacker Extend-A-Fender Flares deliver premium-grade protection and style matched to oversized tires, yet as tough as they are, they go on easily with no drilling required. You can install them in minutes and enjoy them for years. Our exclusive Dura-Flex 2000 material is designed for added durability and flexibility with built-in UV protection. Your Extend-A-Fender Flares resist chalking, cracking, and warping, whether you leave them with their OEM-style matte black finish or paint them for a totally personalized look. Either way, your truck will look factory-equipped for your off-road tires. Extend-A-Fender Flares go on easy, perform tough, and look great.

Additional Fitment Information:

Vehicle	Position	Sub Model
1999 - Chevrolet Blazer	Front and Rear	LT

1 In Stock

$814.84 CAD

$977.81 CAD


Brand	Bushwacker
Part #	41907-11
Condition	New
Warehouse	C

2001 Chevrolet Blazer Fender Flare - Front and Rear Bushwacker

4 pc.; Front Tire Coverage 2.25 in.; Front Height 3.75 in.; Rear Tire Coverage 2.25 in; Rear Height 4 in.; Smooth Finish; Black
Extend-A-Fender® Flares; 4 pc.; Front Tire Coverage 2.25 in.; Front Height 3.75 in.; Rear Tire Coverage 2.25 in; Rear Height 4 in.; Smooth Finish; Black;
Extend-A-Fender® Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
Features:
- Precision Engineered For A Perfect Fit And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus - All Hardware Is Included
- Limited Lifetime Warranty
- Smooth - Contoured Look - These Flares Provide More Protection Than Our Oe Style Flares
- Tire Coverage Varies With Vehicle 1.25 in. - 3 in.
- Whether On-Road Or Off / Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- A Smooth - Contoured Look Which Provides More Protection From Dirt And Debris Than Our OE Style Flares
Youve equipped your vehicle with oversize wheels and tires for serious off-road traction and clearance. Now you need extra tire coverage to protect your rigs body and maybe even comply with local laws. Bushwacker Extend-A-Fender Flares deliver premium-grade protection and style matched to oversized tires, yet as tough as they are, they go on easily with no drilling required. You can install them in minutes and enjoy them for years. Our exclusive Dura-Flex 2000 material is designed for added durability and flexibility with built-in UV protection. Your Extend-A-Fender Flares resist chalking, cracking, and warping, whether you leave them with their OEM-style matte black finish or paint them for a totally personalized look. Either way, your truck will look factory-equipped for your off-road tires. Extend-A-Fender Flares go on easy, perform tough, and look great.

Additional Fitment Information:

Vehicle	Position	Sub Model
2001 - Chevrolet Blazer	Front and Rear	LS

1 In Stock

$814.84 CAD

$977.81 CAD


Brand	Bushwacker
Part #	41907-11
Condition	New
Warehouse	C

2004 Chevrolet Blazer Windshield Wiper Blade - Front Anco

ANCO Conventional 31 Series Wiper Blades 20
Original Blade Type
ANCO 31-Series Wiper Blade (Pack of 1)
31-Series
Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

20-1, 20-2, 20-3, 20-4, 20-51, 20-52, 20-53, 20-54, 20-58, 20-59, 20-8, 20-9, 358-200, 358-201, 359-210, 3719, 38-200, 38-201...VIEW MORE

Additional Fitment Information:

Vehicle	Position
2004 - Chevrolet Blazer	Front

350 In Stock

$11.51 CAD

$13.81 CAD


Brand	Anco
Part #	A1931-20
Condition	New
Warehouse	B

UPC: 37577094576

2020 Chevrolet Blazer Spark Plug 4 Cyl 2.5L Champion

Champion Copper Plus- Boxed - RE14MCC4
Gap 0.040in; Plug Type RE14MCC4
Champion Copper Plus 570 Spark Plug (Carton of 4)
Copper Plus
Product Attributes:
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Re14mcc4
- Hex Size:
  - 0.625
  - 15.880
- Reach: 0.984
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 14
- Pre-Gap Size:
  - 0.045
  - 1.15
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:

RE14MCC4

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2020 - Chevrolet Blazer	L	2457	4 Cyl 2.5L	153

48 In Stock

$9.25 CAD

$11.10 CAD


Brand	Champion
Part #	C33570
Condition	New
Warehouse	B

UPC: 037551009206

1994 Chevrolet Blazer Trailer Hitch - Front 8 Cyl 6.5L CURT

2in. Front Receiver Hitch; Select Chevy; GMC C; K; Suburban; Blazer; Yukon; Taho
5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
CURT 31042 2-Inch Front Receiver Hitch; Select Chevrolet; GMC C; K; Suburban; Blazer; Yukon; Tahoe
2 in Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Chevy Blazer, C1500, K1500, K2500, K3500 or Tahoe and GMC C1500, K1500, K2500, K3500 or Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1994 - Chevrolet Blazer	V	-	Front	8 Cyl 6.5L	395


Brand	CURT
Part #	31042
Condition	New
Warehouse	C

1996 Chevrolet Blazer Trailer Hitch - Rear 6 Cyl 4.3L CURT

Class 3 Hitch; 2in. Receiver; Select Blazer; Jimmy; Bravada (Square Tube Frame)
5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
CURT 13020 Class 3 Trailer Hitch; 2-Inch Receiver; Square Tube Frame; Fits Select Chevrolet Blazer; GMC Jimmy; Oldsmobile Bravada
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Blazer, GMC Jimmy and Oldsmobile Bravada (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1996 - Chevrolet Blazer	V	-	Rear	6 Cyl 4.3L	262


Brand	CURT
Part #	13020
Condition	New
Warehouse	C

1992 Chevrolet Blazer Fender Flare - Front Bushwacker

Extend-A-Fender® Flares
2 pc.; Front Tire Coverage 1.75 in.; Front Height 3.25 in.; Smooth Finish; Black
Extend-A-Fender® Flares; 2 pc.; Front Tire Coverage 1.75 in.; Front Height 3.25 in.; Smooth Finish; Black;
Extend-A-Fender(R) Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
Features:
- Precision Engineered For A Perfect Fit And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus - All Hardware Is Included
- Limited Lifetime Warranty
- Smooth - Contoured Look - These Flares Provide More Protection Than Our Oe Style Flares
- Tire Coverage Varies With Vehicle 1.25 in. - 3 in.
- Whether On-Road Or Off / Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- A Smooth - Contoured Look Which Provides More Protection From Dirt And Debris Than Our OE Style Flares
Youve equipped your vehicle with oversize wheels and tires for serious off-road traction and clearance. Now you need extra tire coverage to protect your rigs body and maybe even comply with local laws. Bushwacker Extend-A-Fender Flares deliver premium-grade protection and style matched to oversized tires, yet as tough as they are, they go on easily with no drilling required. You can install them in minutes and enjoy them for years. Our exclusive Dura-Flex 2000 material is designed for added durability and flexibility with built-in UV protection. Your Extend-A-Fender Flares resist chalking, cracking, and warping, whether you leave them with their OEM-style matte black finish or paint them for a totally personalized look. Either way, your truck will look factory-equipped for your off-road tires. Extend-A-Fender Flares go on easy, perform tough, and look great.

Additional Fitment Information:

Vehicle	Position
1992 - Chevrolet Blazer	Front


Brand	Bushwacker
Part #	40007-01
Condition	New
Warehouse	C

1992 Chevrolet Blazer Fender Flare - Front Bushwacker

2 pc.; Front Tire Coverage 1.75 in.; Front Height 3.25 in.; Smooth Finish; Black
Extend-A-Fender® Flares; 2 pc.; Front Tire Coverage 1.75 in.; Front Height 3.25 in.; Smooth Finish; Black;
Extend-A-Fender® Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
Features:
- Precision Engineered For A Perfect Fit And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus - All Hardware Is Included
- Limited Lifetime Warranty
- Smooth - Contoured Look - These Flares Provide More Protection Than Our Oe Style Flares
- Tire Coverage Varies With Vehicle 1.25 in. - 3 in.
- Whether On-Road Or Off / Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- A Smooth - Contoured Look Which Provides More Protection From Dirt And Debris Than Our OE Style Flares
Youve equipped your vehicle with oversize wheels and tires for serious off-road traction and clearance. Now you need extra tire coverage to protect your rigs body and maybe even comply with local laws. Bushwacker Extend-A-Fender Flares deliver premium-grade protection and style matched to oversized tires, yet as tough as they are, they go on easily with no drilling required. You can install them in minutes and enjoy them for years. Our exclusive Dura-Flex 2000 material is designed for added durability and flexibility with built-in UV protection. Your Extend-A-Fender Flares resist chalking, cracking, and warping, whether you leave them with their OEM-style matte black finish or paint them for a totally personalized look. Either way, your truck will look factory-equipped for your off-road tires. Extend-A-Fender Flares go on easy, perform tough, and look great.