1988 Peugeot Engine Oil Filter Parts

Choose a Model for your 1988 Peugeot


Showing 1 - 5 of 5 products
Image
SKU
Product
Rating
Price

Fram
  • FRAM, PH3985, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.420
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: M20x1.5
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.656
    • Gasket Outside Diameter: 2.790
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
1-8A, 18-7917, 6005021346, 95-01-110, L339, LF115, LF3536, PFL1A, PL30001

Additional Fitment Information:
Vehicle Block CC Engine CID
1988 - Peugeot 505 L 2165 4 Cyl 2.2L -

Mann-Filter
Additional Fitment Information:
Vehicle Aspiration
1988 - Peugeot 505 Turbocharged

CARQUEST
  • Premium
  • 10000 Mile Service

Additional Fitment Information:
Vehicle Aspiration
1988 - Peugeot 505 Turbocharged

Wix
  • WIX Spin-On Lube Filter
  • Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.663
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 370
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 147, 0 451 103 216, 0 451 103 233, 0 986 452 008, 0 986 AF0 265, 0410739, 0410752, 0418054, 0451103148, 05012968AA, 1109 81, 1109 A4, 1109 C2, 156, 1626, 20.37.12/110, 2027, 21626...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1988 - Peugeot 505 L 2165 Canada 4 Cyl 2.2L -

Fram
  • FRAM, PH2849A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 3.610
    • Non Slip Grip: Yes
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 255.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: M20x1.5
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 2.984
    • Gasket Outside Diameter: 3.960
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
116-9924, HF721, HP-2007, P850589, PF2157, T0720978, T08-1061

Additional Fitment Information:
Vehicle Block CC Engine CID
1988 - Peugeot 505 V 2849 6 Cyl 2.8L -
Showing 1 - 5 of 5 products

Loading...