Jeep Comanche Parts

Choose a Year for your Jeep Comanche


Showing 1 - 10 of 1943 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: .750 In. - 16unf-2b
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.200 Lbs. (0.6 Kg)
    • Product Box Height: 4.500 In. (114mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 8-11
    • Outside Diameter: 3.656 In. (93mm)
    • Removal Nut: Yes
    • Item Height: 4.000 In. (102mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Jeep Comanche L - 4 Cyl 2.5L 150

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.035"
  • G-Power Spark Plug
  • Product Attributes:
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5egp
    • Hex Size: 5/8
    • Reach: .75
    • Center Electrode Tip Material: Platinum
    • Stock Number: 7090
    • Ground Electrode Tip Design: Trapezoid
    • Manufacturer Heat Range: 5
    • Ground Configuration: Standard
    • Pre-Gap Size: .040
    • Resistance: 5000
    • Insulator Height: 50.50
    • Ground Electrode Core Material: Nickel
  • NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
3034, 3412, 3412-2, 3436, 3436-2, 3980, 41-800, 4202, 4503, 4507, 4701, 6702, 6726, 6730, 696202, 7090, AGSP32FSM, AP3924...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1990 - Jeep Comanche L - 6 Cyl 4.0L 242

Champion
  • Champion Platinum Power - Boxed - RC9PYC
  • Gap 0.035in; Plug Type RC9PYC
  • Champion Platinum Power 3344 Spark Plug (Carton of 4)
  • Platinum Power
  • Product Attributes:
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Classification: Champion Platinum Power
    • Resistor Type: Yes
    • Plug Type: Rc9pyc
    • Hex Size:
      • 0.625
      • 15.880
    • Reach: 0.75
    • Center Electrode Tip Material: Platinum
    • Manufacturer Heat Range: 9
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.06
  • Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
BCPR6EVX11, F6DP, F7LC0R2, FR5DP0R, FR7DP, FR7DPX, RC9PYC

Additional Fitment Information:
Vehicle Block CC Engine CID
1989 - Jeep Comanche L - 6 Cyl 4.0L 242

Anco
  • ANCO Conventional 31 Series Wiper Blades 18
  • Original Blade Type
  • ANCO 31-Series Wiper Blade (Pack of 1)
  • 31-Series
  • Product Attributes:
    • Adapters Required: No
    • Pressure Point Quantity: 6
    • Adapters Included: Yes
    • Frame Color: Black
    • Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
    • Blade Material: Duraklear - Natural Rubber
    • Frame Material: Metal; Plastic
    • Blade Type: Conventional/bridge
    • Refillable: Yes
  • The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
1385688, 15595485, 18-1, 18-10, 18-2, 18-51, 18-510, 18-52, 18-53, 18-58, 18-8, 22110158, 2580418, 2580419, 2771913, 2771914, 2889960, 33-183...VIEW MORE

Additional Fitment Information:
Vehicle Position
1991 - Jeep Comanche Front

Champion
  • Champion Copper Plus- Boxed - RC12LYC
  • Gap 0.035in; Plug Type RC12LYC Actual OE Part
  • Champion Copper Plus 412 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Hex Size:
      • 0.625
      • 15.880
    • Reach: 0.75
    • Center Electrode Tip Material: Nickel
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Classification: Champion Copper Plus
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.29
    • Resistor Type: Yes
    • Plug Type: Rc12lyc
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
56027275, AGSP54, AGSP54C, F8LCR, FR3LM, FR4LE, FR9HC, Q16HRU, QJ16HRU, RC12LYC, SF98E

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Jeep Comanche L - 6 Cyl 4.0L 242

Champion
  • Champion Copper Plus- Boxed - RC12LYC
  • Gap 0.035in; Plug Type RC12LYC Actual OE Part
  • Champion Copper Plus 412 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Hex Size:
      • 0.625
      • 15.880
    • Reach: 0.75
    • Center Electrode Tip Material: Nickel
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Classification: Champion Copper Plus
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.29
    • Resistor Type: Yes
    • Plug Type: Rc12lyc
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Jeep Comanche L - 4 Cyl 2.5L 150

Trico
  • 18" TRICO Exact Fit Wiper Blade
  • With hole on side of blade
  • 9mm Hook, 3/16" Side Lock, 7mm Bayonet
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
1990 - Jeep Comanche Front

CURT
  • 2in. Front Receiver Hitch; Select Jeep Cherokee; Comanche; Wagoneer
  • 3000lbs. Gross Trailer Weight; 300lbs. Tongue Weight; 9000lbs. Straight-Line Pull Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 31084 2-Inch Front Receiver Hitch; Select Jeep Cherokee; Comanche; Wagoneer
  • 2 in Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3000 Lbs.
    • WARNING CA Proposition 65: No
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Provides A Convenient Mount For Hitch Accessories
    • Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
    • Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made In USA
  • A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,000 lbs. GTW and 300 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Cherokee, Comanche and Wagoneer (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1988 - Jeep Comanche L - Front 4 Cyl 2.5L 150

Bushwacker
  • Cut-Out™ Fender Flares
  • 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.75 in.; Textured Finish; Black
  • Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.75 in.; Textured Finish; Black;
  • Cut-Out(TM) Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: Yes
  • Features:
    • Installation Drilling And/Or Cutting Required
    • Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
    • Limited Lifetime Warranty
    • Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
    • Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
    • Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
    • 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
    • Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
  • For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.

Additional Fitment Information:
Vehicle Position Bed
1990 - Jeep Comanche Front and Rear Fleetside

Bushwacker
  • 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.75 in.; Textured Finish; Black
  • Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 4.5 in.; Front Height 4.5 in.; Rear Tire Coverage 3.5 in; Rear Height 4.75 in.; Textured Finish; Black;
  • Cut-Out™ Fender Flares
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Drilling Required: Yes
  • Features:
    • Installation Drilling And/Or Cutting Required
    • Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
    • Limited Lifetime Warranty
    • Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
    • Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
    • Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
    • 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
    • Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
  • For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.

Additional Fitment Information:
Vehicle Position Bed
1986 - Jeep Comanche Front and Rear Fleetside
Showing 1 - 10 of 1943 products

Loading...