Nissan Murano Parts


Showing 1 - 10 of 5109 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Nissan Murano V 3498 6 Cyl 3.5L -

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle
2020 - Nissan Murano

Moog
  • Tie Rod End
  • Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
  • MOOG ES800046 Tie Rod End
  • Product Attributes:
    • End 2 Thread Pitch: 1.5
    • Dust Boot Included: Yes
    • End 2 Thread Diameter: 14.0
    • End 1 Thread Direction: Clockwise
    • End 1 Gender: Female
    • Greaseable: Yes
    • End 1 Thread Diameter: 14.0
    • End 1 Thread Pitch: 1.5
    • End 2 Gender: Female
    • Length - Stud Center to End: 7.670
  • Features:
    • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
101-5745, 269-3486, 401-2149B, 4012149, 45A1149, 46A1149A, 48520CB025, 534-818, 612.42035, 61342035, D8520CB025, ES4108, ES4367, ES800046, JTE1255, MES800046, TO69195

Additional Fitment Information:
Vehicle Position
2005 - Nissan Murano Outer

Moog
  • Tie Rod End
  • MOOG ES800046 Tie Rod End
  • Product Attributes:
    • End 2 Thread Pitch: 1.5
    • Dust Boot Included: Yes
    • End 2 Thread Diameter: 14.0
    • End 1 Thread Direction: Clockwise
    • End 1 Gender: Female
    • Greaseable: Yes
    • End 1 Thread Diameter: 14.0
    • End 1 Thread Pitch: 1.5
    • End 2 Gender: Female
    • Length - Stud Center to End: 7.670
  • Features:
    • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position
2006 - Nissan Murano Outer

Anco
  • ANCO Conventional 31 Series Wiper Blades 18
  • ANCO 31-Series Wiper Blade (Pack of 1)
  • 31-Series
  • Product Attributes:
    • Adapters Required: No
    • Pressure Point Quantity: 6
    • Adapters Included: Yes
    • Frame Color: Black
    • Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
    • Blade Material: Duraklear - Natural Rubber
    • Frame Material: Metal; Plastic
    • Blade Type: Conventional/bridge
    • Refillable: Yes
  • The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
1385688, 15595485, 18-1, 18-10, 18-2, 18-51, 18-510, 18-52, 18-53, 18-58, 18-8, 22110158, 2580418, 2580419, 2771913, 2771914, 2889960, 33-183...VIEW MORE

Additional Fitment Information:
Vehicle Position
2018 - Nissan Murano Front Right

NGK
  • NGK Laser Platinum Spark Plug
  • Gap 0.044" Actual OE Manufacturer 105,000 mi OE Mfr Recommended Service Interval
  • Laser Platinum Spark Plug
  • Product Attributes:
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Center Electrode Core Material: Copper
    • Part Number: Plfr5a-11
    • Hex Size: 5/8
    • Reach: 26.5
    • Center Electrode Tip Material: Platinum
    • Stock Number: 6240
    • Ground Electrode Tip Design: Standard
    • Manufacturer Heat Range: 5
    • Ground Configuration: Standard
    • Pre-Gap Size: .044
    • Resistance: 5000
    • Insulator Height: 50.50
    • Ground Electrode Core Material: Nickel
  • NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
22401-2DR15, 22401-5M015, 224015M075, 3417, 4505, 4703, 6240, 77 01 053 104, 7975, 7975-2, 8110, 9615, 9620, APP5325, FR7NII35U, IKH16TT, PKH16TT, SK16HR11...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Nissan Murano V 3498 6 Cyl 3.5L -

Trico
  • 19" TRICO Exact Fit Wiper Blade
  • 9mm Hook, 9x4 Hook, 3/16" Side Lock
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
2004 - Nissan Murano Right

Trico
  • 19" TRICO Exact Fit Wiper Blade
  • Early
  • 9mm Hook, 9x4 Hook, 3/16" Side Lock
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
2006 - Nissan Murano Right

Trico
  • 18" TRICO Exact Fit Wiper Blade
  • 9mm Hook, 3/16" Side Lock, 7mm Bayonet
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
2016 - Nissan Murano Right

Dayco
  • Product Attributes:
    • Cross Section: K-section
    • Top Width: .54
    • Rib Profile: Straight Rib
    • Outside Circumference:
      • 31.17
      • 791.72
    • Rib Depth: Deep
    • Standards: Sae J1459, Sae J2432
    • Effective Length:
      • 30.51
      • 774.96
    • Minimum Operating Temperature:
      • -42.7
      • -45
    • 381: 4
    • Maximum Operating Temperature:
      • 100
      • 212

This Part Fits the Following OEM/Substitute Numbers:
11720-26E02, 11720-26E12, 11950 31U01, 11950-31000, 11950-31U00, 11950-31U02, 11950-8J100, 11950-8J110, 146-040770, 146-040775, 146-040780, 25-040305, 25-74030, 305K4, 31110-P01-003, 31110-P01-0031, 31110-P01-004, 31110-P01-0041...VIEW MORE

Additional Fitment Information:
Vehicle Position
2005 - Nissan Murano Power Steering
Showing 1 - 10 of 5109 products

Loading...