Subaru Outback Parts


Showing 1 - 10 of 5514 products
Image
SKU
Product
Rating
Price

CURT
  • Class 3 Hitch; 2in. Receiver; Select Subaru Legacy; Outback (Exposed Main Body)
  • 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
  • CURT 13390 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Subaru Legacy; Outback
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 600
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Legacy and Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2013 - Subaru Outback H 2498 Rear 4 Cyl 2.5L 2.5i Premium 152

K&N
  • Replacement Air Filter
  • Panel; H-.938 in.; L-8.75 in.; W-8.563 in.
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Width: 8.563 In.
    • Item Weight: 0.900 Lbs. (0.4 Kg)
    • Machine Washable: Yes
    • Product Box Height: 11.560 In. (294mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: Oem
    • Product Box Width: 1.750 In. (44 Mm)
    • Product Box Length: 10.440 In. (265mm)
    • Outside Diameter: Oem
    • Item Height: 0.938 In. (24mm)
    • Prop 65 (C, R or CR): Cr
    • Package Content: 1
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Outside Width: 8.563 In. (217mm)
    • Package Contents: 1 Air Filter
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • Overall Length: N/a
    • Package Quantity: 1
    • Shape: Panel
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.06 Oz (31 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Outside Length: 8.750 In. (222mm)
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
04861688AA, 16546AA090, 16546AA10, 16546AA10A, 16546AA120, 16546AA12A, 16546AA90, 2820304, 46051FG000, 46914, 49012, 88914, A1527, A3109C, A35592, AD3984, AD5592, C2201...VIEW MORE

Additional Fitment Information:
Vehicle
2013 - Subaru Outback

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2002 - Subaru Outback H 3000 6 Cyl 3.0L H6 -

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2013 - Subaru Outback H 2498 4 Cyl 2.5L 2.5i Convenience 152

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Subaru Outback H 2458 4 Cyl 2.5L Base -

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.044"
  • G-Power Spark Plug
  • Product Attributes:
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5egp
    • Hex Size: 5/8
    • Reach: .75
    • Center Electrode Tip Material: Platinum
    • Stock Number: 7090
    • Ground Electrode Tip Design: Trapezoid
    • Manufacturer Heat Range: 5
    • Ground Configuration: Standard
    • Pre-Gap Size: .040
    • Resistance: 5000
    • Insulator Height: 50.50
    • Ground Electrode Core Material: Nickel
  • NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
3034, 3412, 3412-2, 3436, 3436-2, 3980, 41-800, 4202, 4503, 4507, 4701, 6702, 6726, 6730, 696202, 7090, AGSP32FSM, AP3924...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Aspiration CID
2005 - Subaru Outback H 2458 4 Cyl 2.5L Naturally Aspirated -

Anco
  • ANCO Conventional 31 Series Wiper Blades 22
  • Original Blade Type
  • ANCO 31-Series Wiper Blade (Pack of 1)
  • 31-Series
  • Product Attributes:
    • Adapters Required: No
    • Adapters Included: Yes
    • Frame Color: Black
    • Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
    • Blade Material: Duraklear - Natural Rubber
    • Frame Material: Metal; Plastic
    • Blade Type: Conventional/bridge
    • Refillable: Yes
  • The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
22-1, 22-4, 22-51, 22-54, 22-59, 22-9, 23-1, 23-51, 30-221, 350-221, 358-220, 359-230, 3722, 38-220, 39-221, 39-230, 40322, 40722A...VIEW MORE

Additional Fitment Information:
Vehicle Position
2002 - Subaru Outback Front Left

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.044"
  • G-Power Spark Plug
  • Product Attributes:
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Center Electrode Core Material: Copper
    • Part Number: Bkr6egp
    • Hex Size: 5/8
    • Reach: .75
    • Center Electrode Tip Material: Platinum
    • Stock Number: 7092
    • Ground Electrode Tip Design: Trapezoid
    • Manufacturer Heat Range: 6
    • Ground Configuration: Standard
    • Pre-Gap Size: .040
    • Resistance: 5000
    • Insulator Height: 50.50
    • Ground Electrode Core Material: Nickel
  • NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
19, 3068, 3071, 3071-2, 3071S, 3340, 3340-2, 3344, 3346, 3346-2, 4027, 4227, 4504, 4702, 5, 6705, 6724, 6730...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2010 - Subaru Outback H 2458 4 Cyl 2.5L -

CURT
  • Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Legacy; Outback
  • 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
  • CURT 12270 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Legacy; Outback
  • Class II 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 3500
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 45 Minutes
    • WC Tongue Weight: 350
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Subaru Legacy and Outback (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2002 - Subaru Outback H 3000 Rear 6 Cyl 3.0L -

Denso
  • Spark Plug Iridium Power
  • Gap 0.044 Iridium Power - Performance Upgrade with World's Smallest Center Electrode (0.4 mm Dia.) & Tapered Tip Patented U-Groove Design & Patented Ir Alloy (90% Ir)
  • Spark Plug Iridium Power
  • Iridium Power
  • Product Attributes:
    • Hex Size: 16.0
    • Reach: 19.00
    • Center Electrode Tip Material: Iridium
    • Seat Type: Flat
    • Ground Electrode Tip Design: Tapercut, U-groove
    • Center Electrode Core Material: Copper
    • Ground Configuration: Standard
    • Pre-Gap Size: 1.1
    • Resistance: 5000
    • Ground Electrode Core Material: Nickel
  • Increased performance with World's smallest Iridium Center Eletrode (0.4mm).
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP03, 003 159 75 03, 003 159 78 03, 004 159 14 03, 06H 905 601 A, 06H 905 611, 06H 905 621, 09146367, 09482-00427, 09482-00429, 09482-00494, 09482-00508, 09482-00510, 09482-00548, 09482-00550, 0K01C-18-110, 0K23A-18-110, 0K2AA-18-110...VIEW MORE

Additional Fitment Information:
Vehicle Aspiration
2007 - Subaru Outback Naturally Aspirated
Showing 1 - 10 of 5514 products

Loading...