1988 Volvo 760 Suspension Control Arm - Front Left Lower Scan-Tech

PLEASE NOTE : If the Control Arms that need to be replaced are Aluminum, these are no longer available and have been replaced by Steel Control Arms, so you will also need to change the Control Arm Stays, 1-per side, part # 6819079 and the Sway Bar Links, 1-per side, part # 9157725KIT.

Steel with Inner Bushing

SCANTECH
SCANTECH distributes and manufacturers a complete line of OE quality Volvo and Saab replacement parts for the automotive aftermarket.
Scan-Tech Air Filter

The Scan-Tech Air Filter is an OE Equivalent replacement that maintains the OEM specifications for fit, durability and performance.

• Easy installation with a factory quality fit
• OE-quality engineering and materials.
• High airflow rate improves performance and fuel economy.
• Superior dust-holding capacity will increase filter life.
• Prevents particulate matter from entering the engine.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Air Mass Meter

Scan-Tech manufactures a direct fit Air Mass Meter that guarantees OEM quality, fit and performance.

• OEM Quality Direct fit Application
• Platinum coated sensing element
• Meets or exceeds OEM specifications.
• Utilizes the factory style mounts, connectors and fittings.
• Provides exceptional reliability.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Air Mass Meter Boot

The Scan-Tech Air Mass Meter Intake boots meets or exceed the quality, fit and performance of the original equipment it replaces.

• Flexibility and vacuum stability thanks to folds and ribs
• Noise-dampened with specific stiffening
• Integration of pressure and/or temperature sensors
• Will not lose structural durability at high temperatures

Warranty Information: 12 month - 12,000 mile limited warranty against defective materials and workmanship.

---

Scan-Tech Oxygen Sensor

The Scan-Tech oxygen sensor meets or exceeds original equipment specifications for quality, fit and performance.

• OE-Equivalent.
• Direct fit for easy installation.
• Ceramic and platinum components.
• High quality stainless steel.
• OE Style connectors and wire lengths.

Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Universal Oxygen Sensor

The Scan-Tech universal oxygen sensor meets or exceeds original equipment specifications for quality, fit and performance.

• OE-Equivalent.
• Direct fit for easy installation.
• Ceramic and platinum components.
• High quality stainless steel.
• OE Style connectors and wire lengths.

Critical Installation Notes: Please read the installation directions included in the box before removal of the original oxygen sensor form the vehicle. - Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering.

Warranty Information: Universal Oxygen Sensors require assembly of electircal connectors and cannot be returned once wire end connectors have been crimped... 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Fuel Filter

Scan-Tech fuel filters are manufactured to the highest quality standards and meet or exceed the manufacturer’s requirements for fit, flow rate and durability.

• OE-Equivalent and direct fit application.
• Threaded connectors and original equipment quality mounting brackets.
• High-efficiency filter media.
• Pressure stable, heavy-duty housings.
• Provides protection against fuel system wear and corrosion

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

WSO Alternators:
WORLD SOURCEONE 100% New Alternators are manufactured to withstand the high output electrical demands of today’s vehicles and are designed to perform under the most severe operating environments.
Purchasing a 100% new WSO alternator guarantees that none of the internal components have ever been exposed to severe operating conditions.
In the event your alternator fails, WSO provides a full 2 year roadside assistance program. (Download PDF).

OE Quality: Superior, reliable performance compared to competitive products, Includes major heat related wear items: rectifier, regulator, rotor, stator and bearings, Factory OE Connectors
Exact fit: No additional time consuming steps needed for installation
100% New Alternator: No remanufactured components, Designed to provide durability and performance, Maximum output performance, Longest performance life
100% Fully Load Tested: Meets or exceeds original equipment manufacturers amperage and voltage output standards, Individual performance and test report provided in box
Protection Plan: 2-year roadside assistance program
Latest Certification: TS 16949

WSO Alternators:
WORLD SOURCEONE 100% New Alternators are manufactured to withstand the high output electrical demands of today’s vehicles and are designed to perform under the most severe operating environments.
Purchasing a 100% new WSO alternator guarantees that none of the internal components have ever been exposed to severe operating conditions.
In the event your alternator fails, WSO provides a full 2 year roadside assistance program. (Download PDF).

OE Quality: Superior, reliable performance compared to competitive products, Includes major heat related wear items: rectifier, regulator, rotor, stator and bearings, Factory OE Connectors
Exact fit: No additional time consuming steps needed for installation
100% New Alternator: No remanufactured components, Designed to provide durability and performance, Maximum output performance, Longest performance life
100% Fully Load Tested: Meets or exceeds original equipment manufacturers amperage and voltage output standards, Individual performance and test report provided in box
Protection Plan: 2-year roadside assistance program
Latest Certification: TS 16949

METRIX® Radiators:
METRIX® OE Style Aluminum Core Radiators are guaranteed to match the exact specifications as the factory installed radiator, providing an OE quality part that will fit the same as the original manufacturer's product with no need to drill holes, move fittings, or stretch hoses.
All METRIX® radiators, tanks, cores, dimensions and materials meet the vehicle manufacturer's strict OE standards and are required to pass rigorous performance and durability tests.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation, Late model coverage
OE Engineered: Aluminum Core - Lightweight and improved engine cooling performance, Plastic Tanks - Optimized seal for improved durability against vibration and distortion
Aluminum Core: Advanced design for optimum heat transfer, High pressure resistance
Oil Cooler: Integrated OE design for efficient thermal management

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

Scan-Tech Expansion Tank

The Scan-Tech expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

• OE-Equivalent and Direct Fit for easy Installation.
• OE style connections and fittings.
• Made of highly durable materials.
• Resistant to thermal wear and cracking.

WARRANTY INFORMATION: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

METRIX® Water Pumps:
METRIX® water pumps provide an outstanding coolant flow rate in all driving conditions, from stationary to high speed. Performance is guaranteed through corrosion protection, cavitation resistance, reliable sealing technology, and the use of high quality components.
METRIX® water pumps deliver optimal hydraulic efficiency with maximum pressure resistance to efficiently protect against over-heating while improving fuel consumption and reducing emissions.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Optimal hydraulic efficiency, Maximum pressure resistance
Advanced Impeller Design: Outstanding coolant flow rate, Optimal hydraulic efficiency, Improves fuel consumption and reduces emissions

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

Scan-Tech Clutch kit

The Scan-Tech aftermarket clutch kits are developed with high-quality parts originating from technologies developed in the Original Equipment marketplace assuring the highest quality replacement clutch for every application.

• OE Quality and direct fit application.
• Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan Tech Control Arm

The Scan Tech control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

• OE-Equivalent and Direct fit for easy Installation.
• Manufactured using high quality OE materials.
• Includes factory specified hardware.

12 MONTH / 12,000 MILE LIMITED WARRANTY: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Strut Mount

The Scan-Tech strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Pivot for the steering mechanism, providing a smooth steering response
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

Installation Note: It is reccommended that the strut mounts should be replaced anytime the shocks or struts are removed.

WARRANTY INFORMATION: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Shock Absorber

The Scan-Tech twin tube design shock absorber is an OE-equivalent replacement that is engineered to restore the vehicle’s original ride quality.

• OE-equivalent.
• Direct fit application for ease of installation.
• Supplied with required bushings and hardware.
• Twin tube design.
• Restores the original driving performance.

The Sachs shock absorber maintains the quality original equipment drivability, comfort and durability.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Scan-Tech Brake Pads

The Scan-Tech OE formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.

• OE-Equivalent and Direct Fit application.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic compound.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Scan-Tech A/C Condenser

The Scan-Tech A/C Condenser is manufactured to exact OEM specifications for quality fit and performance.

• OE-Equivalent and Direct fit Application.
• Meet or exceed OEM specifications.
• Utilizes the factory style mounts, connectors and fittings.
• Compatible with R12 and R134a refrigerant.
• Applicable gaskets and O-rings supplied with each part.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

METRIX® Receiver Driers:
METRIX® receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion.
The METRIX® receiver drier features a lightweight aluminum or high strength steel assembly and provides an exact fit, just as an OE-quality part should.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Provides enhanced separation of liquid and vapor.
OE Construction: Aluminum - Lightweight and Resists Corrosion, Steel - High Strenght
Desiccant Filter Controls moisture and helps protect the entire A/C system against corrosion

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

METRIX® Blower Motor Assemblies:
METRIX® blower motor assemblies are designed and manufactured to OE specifications and provide the performance required in extreme conditions including; temperature fluctuations, dust, humidity and vibration.
METRIX® blower motor assemblies incorporate permanent magnets and lubricated bearings for dependable operation; contains OE style impellers for enhanced air flow, OE wire connectors, and a precision motor to deliver quiet vibration free operation.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Highly efficient, reduced noise and vibration
Advanced Motor Design: Quiet trouble free operation, Permanent magnets and lubricated bearings
OE Impellers: Improved air flow, Balanced fan assembly

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

Scan-Tech Activated Charcoal Cabin Filter

The Scan-Tech Activated Charcoal Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• Activated charcoal layer absorbs toxic and foul-smelling gases.
• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Carbon Activated Filter protects passengers by eliminating nearly 100% of exhaust pollutants entering the interior of the vehicle.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Activated Charcoal Cabin Air Filters: Cabin air filters with activated carbon elements remove harmful exhaust fumes, dirt and dust as well as high ozone concentrations and unpleasant smells. Their pleat bellows consist of three layers: an activated carbon layer is sandwiched between two layers of non-woven materials. The filter layers are heat-fused, which means that glues or solvents are not used at all. Depending on the vehicle type, activated carbon filters are also available that can be used instead of conventional cabin air filters.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Scan-Tech Particulate Cabin Filter

The Scan-Tech Particulate Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---