1960 Centerforce Parts

Choose a Make for your 1960 vehicle

Chevrolet Plymouth

Showing 1 - 10 of 12 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1960 Chevrolet Impala Transmission Clutch and Flywheel Kit 8 Cyl 4.6L Centerforce

SST 10.4; Clutch and Flywheel Kit
10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Brg./Bolts/Alignment Tool
The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
Centerforce I Clutch And Flywheel Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
Features:
- 10.4 in. Diameter
Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet Impala	V	4638	8 Cyl 4.6L	283

4 In Stock

$1,828.73 CAD

$2,194.48 CAD

Brand	Centerforce
Part #	C78412714820
Condition	New
Warehouse	B

1960 Chevrolet Impala Clutch Flywheel 8 Cyl 4.6L Centerforce

Centerforce(R) Flywheels; Steel
168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
Billet Steel Flywheel
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet Impala	V	4638	8 Cyl 4.6L	283

3 In Stock

$612.21 CAD

$734.65 CAD

Brand	Centerforce
Part #	C78700120
Condition	New
Warehouse	B

1960 Chevrolet Biscayne Transmission Clutch and Flywheel Kit 8 Cyl 4.6L Centerforce

SST 10.4; Clutch and Flywheel Kit
10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Bearing/Bolts/Alignment Tool
The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
Centerforce I Clutch And Flywheel Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
Features:
- 10.4 in. Diameter
Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet Biscayne	V	4638	8 Cyl 4.6L	283

4 In Stock

$1,828.73 CAD

$2,194.48 CAD

Brand	Centerforce
Part #	C78412714800
Condition	New
Warehouse	B

1960 Chevrolet El Camino Transmission Clutch Friction Plate 8 Cyl 4.6L Centerforce

Centerforce(R) I and II; Clutch Friction Disc
10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
Clutch Disc
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 10.400 In.
- Spline Size: 1.03125 In. - 10
Features:
- High Quality Friction Material
- Smooth Engagement
Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet El Camino	V	4638	8 Cyl 4.6L	283

1 In Stock

$241.62 CAD

$289.94 CAD

Brand	Centerforce
Part #	C78384193
Condition	New
Warehouse	B

1960 Chevrolet Impala Clutch Release Bearing 8 Cyl 4.6L Centerforce

Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Throwout Bearing
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Throwout Bearing
Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet Impala	V	4638	8 Cyl 4.6L	283

18 In Stock

$90.27 CAD

$108.32 CAD

Brand	Centerforce
Part #	C78N1716
Condition	New
Warehouse	B

1960 Chevrolet Corvette Clutch Pressure Plate and Disc Set Centerforce

Dual Friction(R); Clutch Pressure Plate and Disc Set
10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 529 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
Dual Friction® Clutch Pressure Plate And Disc Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:

Vehicle
1960 - Chevrolet Corvette

1 In Stock

$853.90 CAD

$1,024.68 CAD

Brand	Centerforce
Part #	C78DF271675
Condition	New
Warehouse	B

1960 Chevrolet El Camino Clutch Pilot Bearing 8 Cyl 4.6L Centerforce

Centerforce(R) Accessories; Clutch Pilot Bearing
0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Pilot Bearing
Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
Features:
- Pilot Bearing
Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Chevrolet El Camino	V	4638	8 Cyl 4.6L	283

Brand	Centerforce
Part #	C7843001
Condition	New
Warehouse	B

1960 Chevrolet Corvette Clutch Alignment Tool Centerforce

Centerforce(R) Accessories; Clutch Alignment Tool
10 Spline; 1 1/8 in. Input Shaft; 0.590 in. Diameter
The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.
Clutch Alignment Tool
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Clutch Alignment Tool
Alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application, leaving no need to replace the alignment tool with each clutch.

Additional Fitment Information:

Vehicle
1960 - Chevrolet Corvette

Brand	Centerforce
Part #	C7853010
Condition	New
Warehouse	B

1960 Plymouth Fury Clutch Release Bearing 8 Cyl 5.2L Centerforce

Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
Flat Face; 1.625 in. Height; 2.740 in. Major Outside Diameter; 1.255 in. Inside Diameter; Clip Retension
Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Throwout Bearing
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Throwout Bearing
Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1960 - Plymouth Fury	V	5211	8 Cyl 5.2L	318

Brand	Centerforce
Part #	N1463
Condition	New

1960 Plymouth Fury Clutch Alignment Tool 8 Cyl 5.2L Centerforce

Centerforce(R) Accessories; Clutch Alignment Tool
26 Spline; 1 1/8 in. Input Shaft; 0.590 in. Diameter
The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.
Clutch Alignment Tool
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Clutch Alignment Tool
Alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application, leaving no need to replace the alignment tool with each clutch.