1960 Energy Suspension Parts

Choose a Make for your 1960 vehicle

Chevrolet Ford Jeep Toyota

Showing 1 - 10 of 17 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1960 Chevrolet Biscayne Steering Tie Rod End Boot Energy Suspension

Red; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack
Tie Rod Dust Boot; Red; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack;
Tie Rod Dust Boot
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Easy To Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy's Hyper-Flex(TM) performance polyurethane for added performance and durability.

Additional Fitment Information:

Vehicle
1960 - Chevrolet Biscayne

48 In Stock

$11.78 CAD

$14.14 CAD

Brand	Energy Suspension
Part #	E129.13101R
Condition	New
Warehouse	B

1960 Jeep CJ5 Leaf Spring Bushing - Rear Energy Suspension

Black; Front/ Performance Polyurethane
Leaf Spring Bushing Set; Black; Front/Rear; Performance Polyurethane;
Leaf Spring Bushing Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
Features:
- Made Of Superior Hyper-Flex Material
- Adds Dramatic Amount Of Performance/Durability
- Helps Vehicle Be In Control
- Allows The Suspension To Function Properly
Adds a dramatic amount of performance and durability to any vehicle. For cars, trucks and SUVs. Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy's Hyper-Flex(TM) performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Additional Fitment Information:

Vehicle	Position
1960 - Jeep CJ5	Rear

5 In Stock

$30.14 CAD

$36.17 CAD

Brand	Energy Suspension
Part #	E122.2101G
Condition	New
Warehouse	B

1960 Jeep CJ5 Leaf Spring Bushing - Front Energy Suspension

Black; Performance Polyurethane
Leaf Spring Bushing Set; Black; Front/Rear; Performance Polyurethane;
Leaf Spring Bushing Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
Features:
- Made Of Superior Hyper-Flex Material
- Adds Dramatic Amount Of Performance/Durability
- Helps Vehicle Be In Control
- Allows The Suspension To Function Properly
Adds a dramatic amount of performance and durability to any vehicle. For cars, trucks and SUVs. Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy's Hyper-Flex(TM) performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Additional Fitment Information:

Vehicle	Position
1960 - Jeep CJ5	Front

5 In Stock

$30.14 CAD

$36.17 CAD

Brand	Energy Suspension
Part #	E122.2101G
Condition	New
Warehouse	B

1960 Chevrolet Biscayne Suspension Control Arm Bushing Kit - Front Energy Suspension

Black; Performance Polyurethane
Control Arm Bushing Set; Black; Front; Performance Polyurethane;
Control Arm Bushing Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
Features:
- Maintains Better Alignment While Driving
- Full Floating And Non Binding
- Fits Into The Remaining Stock Control Arms
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.

Additional Fitment Information:

Vehicle	Position
1960 - Chevrolet Biscayne	Front

7 In Stock

$126.59 CAD

$151.91 CAD

Brand	Energy Suspension
Part #	E123.3108G
Condition	New
Warehouse	B

1960 Chevrolet Bel Air Engine Mount - Left 8 Cyl 5.7L Energy Suspension

Black; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane
Motor Mount; Black; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane;
Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Gains Both Performance And Longevity
- Will Handle Any And All Torque
- Out Lasts Rubber
A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. •Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1960 - Chevrolet Bel Air	V	5704	Left	8 Cyl 5.7L	348

76 In Stock

$69.51 CAD

$83.41 CAD

Brand	Energy Suspension
Part #	E123.1114G
Condition	New
Warehouse	B

1960 Chevrolet Bel Air Engine Mount - Right 8 Cyl 5.7L Energy Suspension

Black; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane
Motor Mount; Black; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane;
Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Gains Both Performance And Longevity
- Will Handle Any And All Torque
- Out Lasts Rubber
A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. •Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1960 - Chevrolet Bel Air	V	5704	Right	8 Cyl 5.7L	348

76 In Stock

$69.51 CAD

$83.41 CAD

Brand	Energy Suspension
Part #	E123.1114G
Condition	New
Warehouse	B

1960 Chevrolet Biscayne Suspension Control Arm Bushing Kit - Front Energy Suspension

Red; Performance Polyurethane
Control Arm Bushing Set; Red; Front; Performance Polyurethane;
Control Arm Bushing Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
Features:
- Maintains Better Alignment While Driving
- Full Floating And Non Binding
- Fits Into The Remaining Stock Control Arms
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy's Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.

Additional Fitment Information:

Vehicle	Position
1960 - Chevrolet Biscayne	Front

1 In Stock

$126.59 CAD

$151.91 CAD

Brand	Energy Suspension
Part #	E123.3108R
Condition	New
Warehouse	B

1960 Chevrolet Bel Air Engine Mount - Left 8 Cyl 5.7L Energy Suspension

Red; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane
Motor Mount; Red; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane;
Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Safety Interlock Design
- Will Handle Any And All Torque
- Outlasts And Outperforms Rubber
- Replaces Aftermarket 2267
- 2285
- 2142
A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. •Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1960 - Chevrolet Bel Air	V	5704	Left	8 Cyl 5.7L	348

5 In Stock

$69.51 CAD

$83.41 CAD

Brand	Energy Suspension
Part #	E123.1114R
Condition	New
Warehouse	B

1960 Chevrolet Bel Air Engine Mount - Right 8 Cyl 5.7L Energy Suspension

Red; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane
Motor Mount; Red; Short And Wide; 2 5/8x1.75 in.; Zinc Finish; Sold Individually; Performance Polyurethane;
Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Safety Interlock Design
- Will Handle Any And All Torque
- Outlasts And Outperforms Rubber
- Replaces Aftermarket 2267
- 2285
- 2142
A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. •Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1960 - Chevrolet Bel Air	V	5704	Right	8 Cyl 5.7L	348

5 In Stock

$69.51 CAD

$83.41 CAD

Brand	Energy Suspension
Part #	E123.1114R
Condition	New
Warehouse	B

1960 Chevrolet Biscayne Steering Tie Rod End Boot Energy Suspension

Black; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack
Tie Rod Dust Boot; Black; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack;
Tie Rod Dust Boot
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Easy To Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy's Hyper-Flex(TM) performance polyurethane for added performance and durability.