2005 JKS Manufacturing Parts

Choose a Make for your 2005 vehicle

Jeep

Showing 1 - 10 of 23 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2005 Jeep Wrangler TJ/LJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Rear Adjustable Sway Bar Links
Min. Adjusted Length - 8.75" Max Adjusted Length - 15" *See Instructions for further details. Requires Front 2.5" to 6" of Lift. Not compatible with aftermarket swaybars. Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle.
Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 7 To 10-1/2
- Maximum Adjusted Length: 15.00
- Title: Rear Adjustable Sway Bar Links
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.

Additional Fitment Information:

Vehicle
2005 - Jeep Wrangler TJ/LJ

Brand	JKS Manufacturing
Part #	J46JKS2942
Condition	New
Warehouse	B

2005 Jeep Wrangler TJ/LJ Skid Plate Kit JKS Manufacturing

Control Arm Skid Plate
These MiniSkids are specifically designed for the front axle of the Jeep JK and will work with both factory and aftermarket control arms. Using heavy-duty 1/4" steel plate construction, the low-profile design allows you to add protection for your lower control arms with the added benefit of a significant strength upgrade to the factory bracket design.
Product Attributes:
- Welding Required: Yes
- Metal Cutting Required: No
Features:
- Prevents misalignment of adjustment cam bolts to ensure reliable caster settings.
- Spans OE bracket to form a much stronger boxed structure.
- Ultra-protective design utilizes thick 1/4" plate steel construction that is folded for extra rigidity and proper clearance.
Protect your truck or Jeep off road with Zone skid plates built for lift kits and control arm protection. Zone Offroad skid plates are built from high strength steel and designed to protect versus impact from rocks and debris. The underbody and engine of your Truck or Jeep are the most vulnerable when driving off road and adding a Zone skid plate will prevent damage. Front skid plates are designed to be installed with Zone Offroad lift kit suspension systems for maximum safety and protection of your vehicle.

Additional Fitment Information:

Vehicle
2005 - Jeep Wrangler TJ/LJ

Brand	JKS Manufacturing
Part #	J46JKSOGS115
Condition	New
Warehouse	B

2005 Jeep Wrangler License Plate Bracket JKS Manufacturing

Spare Tire License Plate Mount
Requires additional wiring for license plate light installation
Spare Tire License Plate Mount | Wrangler YJ, TJ, LJ and JK
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Spare Tire License Plate Mount
Features:
- Relocates license plate to the center of the spare tire, mounted off of the existing spare tire mount studs
- Works with stock and most aftermarket spare tire mounts
- Eliminates the factory plastic license plate mount
- Laser cut and CNC formed using 10 gauge steel
- Durable gloss black powder coat
- Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs
Relocate your JK, TJ, YJ Jeep Wrangler’s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5” or 5 on 5” lug patterns and a wheel hub diameter of at least 1.75". Works great!

Additional Fitment Information:

Vehicle	Region
2005 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS8211
Condition	New
Warehouse	B

UPC: 814897011816

2005 Jeep Wrangler Engine Mount Spacer Kit JKS Manufacturing

Budget Motor Mount Lift
Compatible with 4.2L, 4.0L or 2.5L engine only
Budget Motor Mount Lift | Wrangler YJ / TJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Budget Motor Mount Lift
Features:
- Simple, unique 1 in. spacer raises OE front motor mounts on chassis
- Improves rear driveline angles by tilting transfer case output shaft towards the rear axle
- Re-aligns engine fan with radiator shroud for maximum cooling efficiency
- Provides the benefits of raised motor mounts while retaining the soft OE rubber bushings for maximum vibration absorption
- Machined from a solid block of premium T061-T6 aluminum alloy and anodized to prevent oxidation
- Easily installed, bolt-on kit includes zinc-plated hardware for corrosion resistance
- Compatible with 4.0L, 4.2L and 2.5L engines
The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.

Additional Fitment Information:

Vehicle	Region
2005 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS8100
Condition	New
Warehouse	B

2005 Jeep Wrangler Suspension Track Bar - Rear JKS Manufacturing

Adjustable Rear Track Bar
Not compatible with right hand drive vehicles 0-6" Lift For vehicles equipped with CV-type driveshaft order
Adjustable Rear Track Bar | Wrangler TJ and LJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 31.30
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 34.30
- Title: Adjustable Rear Track Bar
- Suggested Starting Length: 32.75
- Installation Tools Requirements: 1-1/2” Open-end Wrench; Anti-seize Lubricant; Heavy Duty Ratchet Strap; Hydraulic Floor Jack And Jack Stands; Metric/standard Socket Wrench Set; T55 Torx Driver (for Oe Track Bar Bolt); Tape Measure; Torque Wrench; Wheel Bearing Grease
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and high performance urethane for steering responsiveness
- Zinc plated and powder coated for protection from corrosion and debris
Install a new adjustable rear track bar on your Jeep Wrangler TJ or LJ to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 1.25" Diameter; 0.25" wall thickness DOM CNC-bent tubing and powder coated and zinc finish. Features a spherical urethane bushing at one end for unrestricted travel, and high performance urethane bushing at the other end for steering responsiveness. Fits up to 6" lift. Bolt-on installation.

Additional Fitment Information:

Vehicle	Position	Region
2005 - Jeep Wrangler	Rear	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS151
Condition	New
Warehouse	B

UPC: 814897010338

2005 Jeep Wrangler Suspension Body Lift Kit JKS Manufacturing

1.25" Body Lift
1.25" Body Lift | Wrangler TJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: 1.25" Body Lift
Features:
- Premium grade body lift kit provides 1.25 in. additional tire clearance without affecting spring rate or suspension geometry
- Raises vehicle body relative to chassis and drivetrain for minimal effect on center of gravity
- Vehicle specific design ensures proper fitment and safe, dependable operation
- Dura-Thane poly spacers encapsulate OE body mounts for ultra secure installation
- Includes soft urethane grill supports to prevent it from cracking under stress
- Easy to install kit includes all hardware necessary for each application
- Requires no modifications to fuel tank, air conditioning, radiator, or brakes, unlike other lift kits
JKS makes it easy to lift your Jeep TJ body 1.25" for increased tire clearance. As opposed to a suspension lift kit, a body lift consists of puck-shaped spacers that raise the vehicle body in relation to the frame. Includes pucks and hardware. Bolt-on installation. Vehicle specific design ensures proper fitment and safe, dependable operation. Dura-Thane poly spacers encapsulate OE body mounts for ultra-secure installation. Includes soft urethane grill supports to prevent it from cracking under stress. Easy to install kit includes all hardware necessary for each application. Requires no modifications to fuel tank, air conditioning, radiator, or brakes.

Additional Fitment Information:

Vehicle	Region
2005 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS9904
Condition	New
Warehouse	B

UPC: 814897010277

2005 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Rear JKS Manufacturing

Rear Adjustable Sway Bar Links
Not compatible with aftermarket sway bars 2.5-6" Lift Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle
Rear Adjustable Sway Bar Link | Wrangler TJ and LJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Rear Adjustable Sway Bar Links
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.

Additional Fitment Information:

Vehicle	Position	Region
2005 - Jeep Wrangler	Rear	United States

Brand	JKS Manufacturing
Part #	J46JKS2942
Condition	New
Warehouse	B

2005 Jeep Wrangler Suspension Track Bar - Front JKS Manufacturing

Adjustable Front Track Bar
Not compatible with right hand drive vehicles 1-3.5" Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
Adjustable Front Track Bar | 1"-3.5" Lift | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.

Additional Fitment Information:

Vehicle	Position	Region
2005 - Jeep Wrangler	Front	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS126
Condition	New
Warehouse	B

UPC: 814897010307

2005 Jeep Wrangler Suspension Shock Absorber Conversion Kit - Front Lower JKS Manufacturing

Shock Bar Pin Eliminator
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Shock Bar Pin Eliminator
Features:
- Heavy duty replacement for bar pin style shock mount prevents transfer of noise and vibration caused by bushing movement
- Preloads shock absorber bushing to proper specifications for better performance and longevity
- Bushing surfaces machined smooth for reduced friction and wear
- Retains original mounting alignment to prevent stress on shock absorber and bushing
- Provides almost 1/2 in. additional down travel at shock absorber
- Zinc plated, premium grade steel components for corrosion resistance
- Compatible with OE and aftermarket shock absorbers
Eliminate a common weak link on your Jeep Wrangler TJ or LJ, by upgrading the front lower shock mounts with JKS bar pin eliminators. The standard bar pin design used by most manufacturers provides no lateral support of the shock absorber bushings. Excessive movement between the parts causes the bushings to distort, instead of deflecting impacts to the shock absorber as intended. As the bushings lose their integrity, annoying "thumping" or "rattling" sounds are often heard, and even felt, inside the vehicle cabin. This solution provides a heavy duty cross pin and mount blocks to convert the shock mounting to a standard EB1 eyelet. The design prevents the transfer of noise and vibration caused by bushing movement. Shock absorber bushings are preloaded for better performance and longevity. Machined bushing surfaces reduce friction and wear. Retains the original mounting alignment to prevent stress on shock absorber and bushing. Provides almost 1/2 in. of additional down travel at shock absorber. Manufactured from premium grade steel and Zinc-coated for corrosion resistance. Compatible with OE and aftermarket shock absorbers.

Additional Fitment Information:

Vehicle	Position	Region
2005 - Jeep Wrangler	Front Lower	United States

Brand	JKS Manufacturing
Part #	J46JKS9603
Condition	New
Warehouse	B

2005 Jeep Wrangler TJ/LJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links
Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderately Easy
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.