2011 JKS Manufacturing Parts

Choose a Make for your 2011 vehicle

Jeep

Showing 1 - 10 of 53 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2011 Jeep Wrangler JK Suspension Track Bar Brace JKS Manufacturing

Rear Track Bar Brace
Does NOT fit right hand drive models.
JKS to the rescue. This heavy-duty rear track bar mount brace may very well save you from a bad day off road ? particularly if your Jeep is modified. Designed specifically for Wrangler JK Jeeps, the brace welds directly to the axle housing and OE track bar mount. The smooth bottom skid plate slides over obstacles. Precision cut and CNC formed from premium grade steel. Ready-to-weld and paint bare metal finish. Does not fit RH drive models.
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Horizontal Position: Rear
- Title: Rear Track Bar Brace
Features:
- Heavy-duty bracket reinforces and prevents catastrophic failure of weak OE trackbar mount
- Welds directly to OE mount and axle housing at multiple points to provide extremely strong and permanent solution
- Smooth, snag-free bottom skid plate slides easily over obstacles
- Precision cut from premium grade steel and CNC formed for accurate fitment
- Ready-to-paint bare metal finish
JKS to the rescue. This heavy-duty rear track bar mount brace may very well save you from a bad day off road – particularly if your Jeep is modified. Designed specifically for Wrangler JK Jeeps, the brace welds directly to the axle housing and OE track bar mount. The smooth bottom skid plate slides over obstacles. Precision cut and CNC formed from premium grade steel. Ready-to-weld and paint bare metal finish. Does not fit RH drive models.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

1 In Stock

$79.24 CAD

$95.09 CAD

Brand	JKS Manufacturing
Part #	J46JKSOGS169
Condition	New
Warehouse	B

2011 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Rear JKS Manufacturing

Adjustable Rear Sway Bar End Links
Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift Front installation requires drilling
Adjustable Rear Sway Bar End Links | Wrangler JK and JL
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.

Additional Fitment Information:

Vehicle	Position	Region	Sub Model
2011 - Jeep Wrangler	Rear	United States	Rubicon

16 In Stock

$133.59 CAD

$160.31 CAD

Brand	JKS Manufacturing
Part #	J46JKS2943
Condition	New
Warehouse	B

2011 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Rear JKS Manufacturing

Adjustable Rear Sway Bar End Links
Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift
Adjustable Rear Sway Bar End Links | Wrangler JK and JL
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.

Additional Fitment Information:

Vehicle	Position	Region	Sub Model
2011 - Jeep Wrangler	Rear	United States	Sahara

16 In Stock

$133.59 CAD

$160.31 CAD

Brand	JKS Manufacturing
Part #	J46JKS2943
Condition	New
Warehouse	B

2011 Jeep Wrangler Suspension Lift Kit - Front and Rear JKS Manufacturing

3.5" Lift Coil Springs
JSPEC 3.5" Lift Coil Springs
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: 3.5" Lift Coil Springs
Features:
- Dual Rate Design
- Includes Front/Rear Springs
- Designed for on-road comfort & off-road performance
Increase clearance, performance and ride quality with a set of JKS JSPEC™ 3.5" lift dual rate coil springs. Fits 2007-2018 Jeep Wrangler JK 4 Door. Includes a complete set of matching front and rear coil springs for a level 3.5" lift. Dual rate springs provide smooth comfortable ride on road, and transition to a firmer rate when tire movement increases off-road for increased vehicle control. Another benefit is the longer overall length, which allows the use of longer shocks for more wheel travel. Whether loaded down with gear for a weeklong expedition, running light for some rock-crawling fun or loaded with a few friends for a trip to the beach, JSPEC™ coils provide the ride you want and the performance you need.

Additional Fitment Information:

Vehicle	Position	Region	Sub Model
2011 - Jeep Wrangler	Front and Rear	United States	Unlimited Rubicon

2 In Stock

$487.57 CAD

$585.08 CAD

Brand	JKS Manufacturing
Part #	J46JSPEC2350
Condition	New
Warehouse	B

UPC: 814897011564

2011 Jeep Wrangler JK Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links
Min. Adjusted Length - 5.625" Max Adjusted Length - 7.125" *See Instructions for further details. Not compatible with aftermarket swaybars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 5.625
- For Use With Lift Heights: 0-2"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 5-1/2 To 7-1/8
- Maximum Adjusted Length: 7.125
- Title: Quicker Disconnect Sway Bar Links
Features:
- Fits vehicles with 0"-2" Lift Only
- Gain 30 percent more axle articulation by disconnecting your front swaybar
- Also fits Wrangler JK right hand drive models
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

17 In Stock

$259.91 CAD

$311.89 CAD

Brand	JKS Manufacturing
Part #	J46JKS2030
Condition	New
Warehouse	B

2011 Jeep Wrangler JK Suspension Track Bar JKS Manufacturing

Front Adjustable Track Bar
Suggested Starting Length - 33.25" Min. Adjusted Length - 32.2" Max Adjusted Length - 34.2" *See Instructions for further details. Does NOT fit Right Hand Drive
JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.
In the box: All Necessary Mounting / Installation Hardware Track Bar
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.20
- For Use With Lift Heights: 1-6"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 34.20
- Title: Front Adjustable Track Bar
- Suggested Starting Length: 33.25
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

Brand	JKS Manufacturing
Part #	J46JKSOGS121
Condition	New
Warehouse	B

2011 Jeep Wrangler JK Suspension Track Bar JKS Manufacturing

Adjustable Rear Track Bar
Suggested Starting Length - 40.38" Min. Adjusted Length - 39.43" Max Adjusted Length - 42.43" *See Instructions for further details. Fits 0 to 6.0 in. suspension lift. Rear Trackbar Brace [JKS PN: OGS169] is strongly recommended to reinforce weak factory mount on axle. Trackbar Brace fits Left Hand Drive Models Only.
Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.
In the box: All Necessary Mounting / Installation Hardware Track Bar
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 39.43
- For Use With Lift Heights: 0-6"
- Installation Time: 6
- Horizontal Position: Rear
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 42.43
- Title: Adjustable Rear Track Bar
- Suggested Starting Length: 40.38
Features:
- Zinc plated and powder coated for protection from corrosion and debris
- Also fits Wrangler JK right hand drive models
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

Brand	JKS Manufacturing
Part #	J46JKSOGS159
Condition	New
Warehouse	B

2011 Jeep Wrangler Suspension Track Bar - Front JKS Manufacturing

Front Adjustable Track Bar
Does NOT fit Right Hand Drive
Front Adjustable Track Bar | Wrangler JK
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 34.20
- Title: Front Adjustable Track Bar
- Suggested Starting Length: 33.25
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.

Additional Fitment Information:

Vehicle	Position	Region
2011 - Jeep Wrangler	Front	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS121
Condition	New
Warehouse	B

UPC: 814897010284

2011 Jeep Wrangler JK Steering Drag Link JKS Manufacturing

Drag Link Flip Kit
For use on LHD JK models with at least 2" of suspension lift Requires 3" of front bump stop extension, JKS1130 available separately Should not be combined with other track bar relocation system Can be used with factory replacement adjustable track bars To be used with factory pitman arm for proper geometry Requires 17" diameter wheel or larger, with 4.75" backspacing or less
JKS Manufacturing?s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8? step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Drag Link Flip Kit
Features:
- Provide better performing, solid steering feel
- Flattens out steering angle when combined with 2" lift or more
- 7/8" Step Drill Bit Included
JKS Manufacturing’s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8” step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

Brand	JKS Manufacturing
Part #	J46JKS1210
Condition	New
Warehouse	B

2011 Jeep Wrangler JK License Plate Mounting Hardware JKS Manufacturing

Spare Tire License Plate Mount
TJ and YJ installations will require additional wiring for license plate light installation. Can be used on other application with spare carriers that have 5on4.5 or 5on5 lug patterns and a wheel hub diameter of at least 1.75".
Relocate your JK, TJ, YJ Jeep Wrangler?s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5? or 5 on 5? lug patterns and a wheel hub diameter of at least 1.75". Works great!
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Horizontal Position: Rear
- Title: Spare Tire License Plate Mount
Features:
- Relocates license plate to the center of the spare tire, mounted off of the existing spare tire mount studs
- Works with stock and most aftermarket spare tire mounts
- Eliminates the factory plastic license plate mount
- Laser cut and CNC formed using 10 gauge steel
- Durable gloss black powder coat
- Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs
Relocate your JK, TJ, YJ Jeep Wrangler’s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5” or 5 on 5” lug patterns and a wheel hub diameter of at least 1.75". Works great!