2000 MSD Parts


Showing 1 - 10 of 60 products
Image
SKU
Product
Rating
Price

MSD
  • Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;OEM Replacement
  • Direct Ignition Coil Set; Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;
  • Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size: Ls
    • Package Quantity: Set Of 8
  • Features:
    • Excellent Reliability
    • Direct Bolt-In Replacement
    • Exceptional Value
  • Look no further when its time to tune-up your LS! Bolt on legendary ignition performance with MSDs direct replacement coils. Reliable parts from the ignition leader at a price that wont break the bank.

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Chevrolet Tahoe V 5328 8 Cyl 5.3L 325

MSD
  • 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Ignition Coil; 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;
  • Ignition Coil
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 77:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 7 Mh
    • Maximum Voltage: 36000
    • Primary Resistance: .510 Ohms
    • Secondary Resistance: 12k Ohms
  • Features:
    • Performance replacement for Mitsubishi 2.0L 1996 to early 1999
    • Performance replacement for Dodge 2.0L from mid 1997 to 2002
    • 77:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    • Flat terminal connection only
    • CARB E.O. Approved
  • MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep. This MSD Blaster Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS-2 Ignition Control, PN 62112. There are two types of 4-tower coils used on the Eclipse, Neon, Talon, and other vehicles. The MSD Coil, PN 8239 has flat terminal pins, if you require a coil with round terminal pins, an Adapter can be ordered from Mopar Dealers as PN M04897087AA, or call the MSD Customer Service line at (915) 855-7123, ask for Adapter, ASY30160.

Additional Fitment Information:
Vehicle
2000 - Plymouth Breeze

MSD
  • 0.5 in. ID; Chevy Gears
  • Distributor Gear Iron; 0.5 in. ID; Chevy Gears;
  • Distributor Gear Iron
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Increased outer hardened layer thickness (RC 55-60)
    • Micro Polished Surface For Smooth Contact
    • Proprietary formulated ductile iron.
    • Melonite QPQ coated reduces friction and initial wear
    • Interstitial carbide improves wear resistance/running properties
  • MSD Ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance!

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Chevrolet S10 V - 6 Cyl 4.3L 262

MSD
  • 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots
  • Custom Spark Plug Wire Set; 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots;
  • Custom Spark Plug Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Boot Type: Multi-angle
    • Engine: Oem
    • Engine Make/Size: Oem
  • Features:
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Bolt-on Performance
  • Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2000 - Pontiac Firebird V - 8 Cyl 5.7L Trans Am 350

MSD
  • 8.5mm; Red; LS1 Conversion; OEM Cut
  • Custom Spark Plug Wire Set; 8.5mm; Red; LS1 Conversion; OEM Cut;
  • Custom Spark Plug Wire Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Boot Type: Multi-angle
    • Engine: Chevy Ls Series
  • Features:
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Bolt-on Performance
  • Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire, there are only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there are over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferromagnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produces a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC Sierra 1500 V 5328 8 Cyl 5.3L 325

MSD
  • 0.5 in. ID; Chevy Gears
  • Distributor Gear Iron; 0.5 in. ID; Chevy Gears;
  • Distributor Gear Iron
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Increased outer hardened layer thickness (RC 55-60)
    • Micro Polished Surface For Smooth Contact
    • Proprietary formulated ductile iron.
    • Melonite QPQ coated reduces friction and initial wear
    • Interstitial carbide improves wear resistance/running properties
  • MSD Ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance!

Additional Fitment Information:
Vehicle
2000 - Chevrolet Blazer

MSD
  • Plug And Play;Race Use Only
  • 2-Step Launch Control; Plug And Play;
  • 2-Step Launch Control
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • 2 Step Rev Limiter for LSx engines
    • Plug and Play
    • Can Be Used w/24X Or 58X Trigger Wheels
  • GM Performance fans will be geeked to learn about this direct plug-in 2-Step Launch Control. The unit is easy to install with factory style connectors for a splice-free installation. When youre staged, you can hold the pedal to the floor while the rpm stays at a consistent level producing consistent launches.

Additional Fitment Information:
Vehicle
2000 - Chevrolet Corvette

MSD
  • Replacement Coil; w/Bracket; Red; Set Of 8;OEM Replacement
  • Blaster LS Direct Ignition Coil Set; Replacement Coil; w/Bracket; Red; Set Of 8;
  • Blaster LS Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Package Quantity: Set Of 8
  • Features:
    • Replacement Coil
    • Full One Year Warranty
  • Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Chevrolet Silverado 2500 V 5328 8 Cyl 5.3L 325

MSD
  • Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;OEM Replacement
  • Direct Ignition Coil Set; Direct Bolt-In Replacement; 2-Bolt; Black; Set Of 8;
  • Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size: Ls
    • Package Quantity: Set Of 8
  • Features:
    • Excellent Reliability
    • Direct Bolt-In Replacement
    • Exceptional Value
  • Look no further when its time to tune-up your LS! Bolt on legendary ignition performance with MSDs direct replacement coils. Reliable parts from the ignition leader at a price that wont break the bank.

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Chevrolet Silverado 1500 V 5328 8 Cyl 5.3L 325

MSD
  • Direct Bolt-In Replacement; Red; 6-Pk;OEM Replacement
  • Blaster Direct Ignition Coil Set; Direct Bolt-In Replacement; Red; 6-Pk;
  • Blaster Direct Ignition Coil Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Excellent Reliability
    • Direct Bolt-In Replacement
    • Plug-In To Factory Wiring
    • Exceptional Value
    • Available In Red And Black
    • Sold In Single And 6-Packs
  • If you are looking for an upgrade from stock, MSD Blaster ignition coils will provide the power, reliability, and quality youve come to expect from the MSD name. These late model Jeep coils are designed as direct replacements for the 4.0L engine. It is one complete coil pack, so it mounts in the factory location and simply plugs into the factory connector. MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Jeep Grand Cherokee L - 6 Cyl 4.0L 242
Showing 1 - 10 of 60 products

Loading...