1962 Ram Parts

Choose a Make for your 1962 vehicle

Chevrolet GMC Oldsmobile Plymouth Pontiac

Showing 1 - 10 of 15 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1962 Chevrolet K10 Pickup Clutch Flywheel 8 Cyl 4.6L Ram

steel flywheel
168 Teeth; Zero Balance
Steel flywheel Chevy 1955-85/262-427/0 bal./168T
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1962 - Chevrolet K10 Pickup	V	4638	8 Cyl 4.6L	283

3 In Stock

$417.05 CAD

$500.46 CAD

Brand	Ram
Part #	R361501
Condition	New
Warehouse	B

1962 Chevrolet Bel Air Clutch Flywheel 8 Cyl 5.3L Ram

steel flywheel
153 Teeth; 10.5 B/B And Diaphragm
Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1962 - Chevrolet Bel Air	V	5358	8 Cyl 5.3L	327

4 In Stock

$388.41 CAD

$466.09 CAD

Brand	Ram
Part #	R361511
Condition	New
Warehouse	B

1962 Chevrolet Impala Transmission Clutch Kit 8 Cyl 6.7L Ram

10.5 x 1 1/8-10 Spline
Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1962 - Chevrolet Impala	V	6704	8 Cyl 6.7L	409

6 In Stock

$289.62 CAD

$347.54 CAD

Brand	Ram
Part #	R3688760
Condition	New
Warehouse	B

1962 Pontiac Bonneville Transmission Clutch Kit 8 Cyl 6.4L Ram

HDX clutch set
11 x 1 1/8-10 Spline
HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
HDX Clutch Set
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1962 - Pontiac Bonneville	V	-	8 Cyl 6.4L	389

1 In Stock

$427.56 CAD

$513.07 CAD

Brand	Ram
Part #	R3688762HDX
Condition	New
Warehouse	B

1962 Chevrolet Corvette Transmission Clutch Kit Ram

Powergrip clutch set
11 x 1 1/8-10 Spline
Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle
1962 - Chevrolet Corvette

1 In Stock

$605.32 CAD

$726.38 CAD

Brand	Ram
Part #	R3698762
Condition	New
Warehouse	B

1962 Pontiac Catalina Transmission Clutch Kit 8 Cyl 6.4L Ram

10.5 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Engine	Sub Model	CID
1962 - Pontiac Catalina	V	6376	36P	8 Cyl 6.4L	Base	389

6 In Stock

$289.62 CAD

$347.54 CAD

Brand	Ram
Part #	R3688760
Condition	New
Warehouse	B

1962 Pontiac Catalina Transmission Clutch Kit 8 Cyl 6.4L Ram

11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Engine	Sub Model	CID
1962 - Pontiac Catalina	V	6376	35M	8 Cyl 6.4L	Ventura	389

5 In Stock

$304.96 CAD

$365.95 CAD

Brand	Ram
Part #	R3688762
Condition	New
Warehouse	B

1962 Pontiac Catalina Transmission Clutch Kit 8 Cyl 6.4L Ram

Powergrip clutch set
11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Engine	Sub Model	CID
1962 - Pontiac Catalina	V	6376	18K	8 Cyl 6.4L	Ventura	389

1 In Stock

$605.32 CAD

$726.38 CAD

Brand	Ram
Part #	R3698762
Condition	New
Warehouse	B

1962 Chevrolet Bel Air Transmission Clutch Kit 8 Cyl 5.3L Ram

11 x 1 1/8-10 Spline
Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1962 - Chevrolet Bel Air	V	5358	8 Cyl 5.3L	327

5 In Stock

$304.96 CAD

$365.95 CAD

Brand	Ram
Part #	R3688762
Condition	New
Warehouse	B

1962 Plymouth Savoy Clutch Flywheel 8 Cyl 5.2L Ram

steel flywheel
6 Bolt ; 130 Teeth; 10.5 in. Borg/Beck And Diaphragm; Zero Balance
Steel flywheel Chrysler 318-440/64-99/0 bal./except 360/6 bolt/130T/10.5 Borg/Beck/Diaphragm
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.