1972 Ram Parts

Choose a Make for your 1972 vehicle

Chevrolet Chrysler Dodge Ford GMC Oldsmobile Plymouth Pontiac

Showing 1 - 10 of 37 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1972 Chevrolet Bel Air Clutch Flywheel 8 Cyl 5.7L Ram

steel flywheel
168 Teeth; Zero Balance
Steel flywheel Chevy 1955-85/262-427/0 bal./168T
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Chevrolet Bel Air	V	-	8 Cyl 5.7L	350

3 In Stock

$417.05 CAD

$500.46 CAD

Brand	Ram
Part #	R361501
Condition	New
Warehouse	B

1972 Chevrolet Bel Air Clutch Flywheel 8 Cyl 5.7L Ram

steel flywheel
153 Teeth; 10.5 B/B And Diaphragm
Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Chevrolet Bel Air	V	-	8 Cyl 5.7L	350

4 In Stock

$388.41 CAD

$466.09 CAD

Brand	Ram
Part #	R361511
Condition	New
Warehouse	B

1972 Chevrolet Biscayne Transmission Clutch Kit 8 Cyl 7.4L Ram

10.5 x 1 1/8-10 Spline
Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Chevrolet Biscayne	V	-	8 Cyl 7.4L	454

7 In Stock

$289.62 CAD

$347.54 CAD

Brand	Ram
Part #	R3688760
Condition	New
Warehouse	B

1972 Chevrolet C20 Pickup Transmission Clutch Kit 8 Cyl 5.0L Ram

HDX clutch set
11 x 1 1/8-10 Spline
HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
HDX Clutch Set
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Chevrolet C20 Pickup	V	-	8 Cyl 5.0L	307

1 In Stock

$427.56 CAD

$513.07 CAD

Brand	Ram
Part #	R3688762HDX
Condition	New
Warehouse	B

1972 Chevrolet Camaro Transmission Clutch Kit 8 Cyl 5.7L Ram

Powergrip HD Clutch set
11 x 1 1/8-26 Spline
Powergrip HD clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
Powergrip HD Clutch Set
Features:
- True Strip/Street Competition Clutch System To The 650 HP Level
- 8 Spring Hum Is Equipped w/Ram Polycoil Damper Springs
- Sintered metallic Friction Material
- For Vehicles That See Frequent Track Duty
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
POWERGRIP HD is a true "strip/street" competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered iron. Sintered iron provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
1972 - Chevrolet Camaro	V	-	8 Cyl 5.7L	Base	H	350

3 In Stock

$672.75 CAD

$807.30 CAD

Brand	Ram
Part #	R3698764HD
Condition	New
Warehouse	B

1972 Chevrolet C20 Pickup Transmission Clutch Kit 8 Cyl 6.6L Ram

Powergrip clutch set
11 x 1 1/8-10 Spline
Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Chevrolet C20 Pickup	V	6588	8 Cyl 6.6L	402

1 In Stock

$605.32 CAD

$726.38 CAD

Brand	Ram
Part #	R3698762
Condition	New
Warehouse	B

1972 Pontiac Firebird Transmission Clutch Kit 8 Cyl 5.7L Ram

10.5 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Replacement clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1972 - Pontiac Firebird	V	5733	8 Cyl 5.7L	Formula	350

7 In Stock

$289.62 CAD

$347.54 CAD

Brand	Ram
Part #	R3688760
Condition	New
Warehouse	B

1972 Pontiac Catalina Transmission Clutch Kit 8 Cyl 6.6L Ram

11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1972 - Pontiac Catalina	V	-	8 Cyl 6.6L	400

5 In Stock

$304.96 CAD

$365.95 CAD

Brand	Ram
Part #	R3688762
Condition	New
Warehouse	B

1972 Pontiac Bonneville Transmission Clutch Kit 8 Cyl 6.6L Ram

Powergrip clutch set
11 x 1 1/8-10 Spline 2.750 in. Crank Pilot Refers To Flywheel Center Hole Opening
Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Engine VIN	CID
1972 - Pontiac Bonneville	V	6555	8 Cyl 6.6L	R	400

1 In Stock

$605.32 CAD

$726.38 CAD

Brand	Ram
Part #	R3698762
Condition	New
Warehouse	B

1972 Chevrolet Camaro Transmission Clutch Kit 8 Cyl 5.7L Ram

11 x 1 1/8-26 Spline
Replacement clutch set 1955-85 GM 11 Diaphragm 1 1/8-26
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.