2000 Yukon Gear Parts

Choose a Make for your 2000 vehicle

Cadillac Chevrolet Dodge Ford GMC Isuzu Jeep Lincoln Mazda Mercury Nissan Oldsmobile Pontiac Toyota

Showing 1 - 10 of 222 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2000 Chevrolet C2500 Spider Gear Yukon Gear

10 Bolt open spider gear set for 00-06 8.6in. GM with 30 spline axles
8.6 in. Axle; 30 Spline GM 8.6 in.; 30 Spline~GM 8.6 in.; 30 Spline; Rear; Spider Gear Set; Fits 00-06 Case with Casting #s 1073 or 7875
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits 2000-2006 GM 8.6 in. Open Differential
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Additional Fitment Information:

Vehicle
2000 - Chevrolet C2500

2 In Stock

$240.18 CAD

$288.22 CAD

Brand	Yukon Gear
Part #	Y11YPKGM8.6-S-30V2
Condition	New
Warehouse	B

2000 Chevrolet Tahoe Differential Side Bearing Spacer Yukon Gear

Yukon Positraction Shim kit GM 8.2in.; GM 8.5in.; 12T; 12P; 8.8in./Cast Iron Vet
8.875 in. 12 Bolt; 8.8 in. 10 Bolt GM 8.6 in.; Dura Grip Posi Shim Kit
Yukon Positraction shim kit (12 shims) for GM 8.2in.; GM 8.5in./8.6in.; 12T; 12P; Ford 8.8in./Cast Iron Vette
Positraction Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Ford 8.8 in.
- 1963-1979 Corvette
- GM 12 Bolt Passenger Car/Truck
- 8.2 in./8.5 in./8.6 in. Dura Grip Positraction
- Shim Kit
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2000 - Chevrolet Tahoe	LS	RWD

2 In Stock

$44.57 CAD

$53.48 CAD

Brand	Yukon Gear
Part #	Y11YPKGM12-PC-SHIM
Condition	New
Warehouse	B

2000 Chevrolet Silverado 1500 Differential - Front 6 Cyl 4.3L Yukon Gear

8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
Yukon Dura Grip Differential
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2000 - Chevrolet Silverado 1500	V	-	Front	6 Cyl 4.3L	262

1 In Stock

$967.66 CAD

$1,161.19 CAD

Brand	Yukon Gear
Part #	Y11YDGGM8.5-3-30-1
Condition	New
Warehouse	B

2000 Chevrolet Tahoe Differential - Rear 8 Cyl 5.3L Yukon Gear

8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
Yukon Dura Grip Differential
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2000 - Chevrolet Tahoe	V	5328	Rear	8 Cyl 5.3L	325

1 In Stock

$967.66 CAD

$1,161.19 CAD

Brand	Yukon Gear
Part #	Y11YDGGM8.5-3-30-1
Condition	New
Warehouse	B

2000 Chevrolet S10 Differential Rebuild Kit 6 Cyl 4.3L Yukon Gear

Yukon Master Overhaul kit for 99-08 GM 8.6in. differential.
8.6 in. 10 Bolt; Pin/Car Brngs; Inst GM 8.6 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; Uses M802048 Inner Pinion Bearing~GM 8.6 in.; Pin/Car Brngs; Inst
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known In The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov
- Model: Gm 8.6 In.
Features:
- Fits 1999-2008 GM 8.6 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2000 - Chevrolet S10	V	-	6 Cyl 4.3L	Base	RWD	262

5 In Stock

$379.61 CAD

$455.53 CAD

Brand	Yukon Gear
Part #	Y11YK GM8.6-A
Condition	New
Warehouse	B

2000 Oldsmobile Bravada Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Rear Axle Bearing/Seal Kit for Various Differentials
8.2 in./8.5 in. 10 Bolt; AMC 35 Reverse/AMC 35/AMC 20; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles GM 7.5 in. and 7.6 in.; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 1 Year Warranty Against Manufacturer Defects
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.

Additional Fitment Information:

Vehicle	Position
2000 - Oldsmobile Bravada	Rear

6 In Stock

$33.08 CAD

$39.70 CAD

Brand	Yukon Gear
Part #	Y11AK 1563
Condition	New
Warehouse	B

2000 Chevrolet Astro Differential Side Bearing Spacer Yukon Gear

Super Carrier Shim kit for Ford 7.5in.; GM 7.5in.; 8.2in./8.5
7.625 in./8.2 in. 10 Bolt; 7.6 in. ; Carrier shim kit; Interlocking design~GM 7.5 in. and 7.6 in.
Super Carrier Shim kit for Ford 7.5in.; GM 7.5in.; 8.2in./8.5in.
Super Carrier Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Super Carrier Shim Kit For Ford 7.5 in./GM 7.5 in./7.625 in./7.6 in. IFS
- 7.6 in. IRS/7.75 in./8.2 in./8.2 in. Buick
- Oldsmobile And Pontiac And GM 8.5 in. Front And Rear
- Interlocking Design Makes Installation Much Easier
Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.

Additional Fitment Information:

Vehicle	Drive Type
2000 - Chevrolet Astro	RWD

Brand	Yukon Gear
Part #	Y11SK SS10
Condition	New
Warehouse	B

2000 Dodge Ram 1500 Differential - Front 8 Cyl 5.2L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	Drive Type	CID
2000 - Dodge Ram 1500	V	5211	Front	8 Cyl 5.2L	Sport	4WD	318

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

2000 Chevrolet C2500 Differential Carrier - Front 8 Cyl 6.5L Yukon Gear

Yukon 30 spline standard open loaded carrier case; GM 8.6
8.6 in. 10 Bolt; Standard; Loaded; Early Design GM 8.6 in.; 10 Bolt; Standard Open Carrier Case; Loaded with Spider Gears~GM 8.6 in.; Standard; Loaded; Early Design
GM 8.6in. 30 spline standard open loaded carrier. Complete differential case with internals.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits GM 8.6 in.
- Standard Open Carrier Case And Spiders
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2000 - Chevrolet C2500	V	-	Front	8 Cyl 6.5L	395

Brand	Yukon Gear
Part #	YC G40048044
Condition	New

2000 Chevrolet C2500 Differential Carrier - Rear 8 Cyl 7.4L Yukon Gear

Yukon 30 spline standard open loaded carrier case; GM 8.6
8.6 in. 10 Bolt; Standard; Loaded; Early Design GM 8.6 in.; 10 Bolt; Standard Open Carrier Case; Loaded with Spider Gears~GM 8.6 in.; Standard; Loaded; Early Design
GM 8.6in. 30 spline standard open loaded carrier. Complete differential case with internals.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits GM 8.6 in.
- Standard Open Carrier Case And Spiders
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.