Shop By Product Matching "motive Gear"

Choose a Year for your vehicle

Showing 1 - 10 of 22 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2016 Cadillac Escalade Differential Bearing Kit - Rear 8 Cyl 6.2L Motive Gear

Differential Bearing Kit - Koyo
For GM 9.76"; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound
Motive Gear - Differential Bearing Kit - Koyo
Differential Bearing Kit
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.76
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2016 - Cadillac Escalade	V	6162	Rear	8 Cyl 6.2L	376

1 In Stock

$574.67 CAD

$689.60 CAD

Brand	Motive Gear
Part #	M92R9.76R
Condition	New
Warehouse	B

UPC: 00698231680537

2001 Lincoln Navigator Differential Ring and Pinion - Rear Motive Gear

For Ford 9.75" (12 Bolt); 4.30 Ratio
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 9.75
- Ring Gear Diameter: 9.75
- Ring & Pinion Gear Ratio: 4.30
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 31
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 10
- Ring Gear Tooth Quantity: 43
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

F975430

Additional Fitment Information:

Vehicle	Position
2001 - Lincoln Navigator	Rear

1 In Stock

$652.18 CAD

$782.62 CAD

Brand	Motive Gear
Part #	M92F9.75-430
Condition	New
Warehouse	B

UPC: 00698231666135

1998 Lincoln Navigator Differential Ring and Pinion - Rear Motive Gear

For Ford 9.75" (12 Bolt); 4.30 Ratio; 1997-1999.5 Models Require Additional Spacer For Pinion Bearing Preload
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 9.75
- Ring Gear Diameter: 9.75
- Ring & Pinion Gear Ratio: 4.30
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 31
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 10
- Ring Gear Tooth Quantity: 43
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Additional Fitment Information:

Vehicle	Position
1998 - Lincoln Navigator	Rear

1 In Stock

$652.18 CAD

$782.62 CAD

Brand	Motive Gear
Part #	M92F9.75-430
Condition	New
Warehouse	B

UPC: 00698231666135

2013 Jeep Wrangler Differential Ring and Pinion - Rear Motive Gear

For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; 2007 Model Carriers Need To Be Drilled For 1/2" Ring Gear Bolts
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 44 Jk
- Ring Gear Diameter: 8.89
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.626
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Pinion Spline Count: 24
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

2008688-5

Additional Fitment Information:

Vehicle	Position
2013 - Jeep Wrangler	Rear

1 In Stock

$945.54 CAD

$1,134.65 CAD

Brand	Motive Gear
Part #	M92D44-373JK
Condition	New
Warehouse	B

UPC: 00698231443118

2016 Ford F-350 Differential Ring and Pinion - Rear Motive Gear

For Ford 10.5" (12 Bolt); 4.11 Ratio; 37 Spline
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Ford 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 4.11
- Pinion Shaft Diameter: 1.94
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Pinion Spline Count: 37
- Cover Bolt Quantity: 12
- Pinion Gear Tooth Quantity: 9
- Ring Gear Tooth Quantity: 37
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

F105-410-37-NG, F105411C

Additional Fitment Information:

Vehicle	Position
2016 - Ford F-350	Rear

2 In Stock

$811.04 CAD

$973.25 CAD

Brand	Motive Gear
Part #	M92F10.5-411-37
Condition	New
Warehouse	B

UPC: 00698231188569

2011 Jeep Wrangler Differential Ring and Pinion - Front Motive Gear

For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 44 Jk Reverse
- Ring Gear Diameter: 8.5
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.376
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Reverse
- Ring Gear Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Pinion Spline Count: 24
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

2013742-5, D44RS-373RUB, YG D44RS-RUB

Additional Fitment Information:

Vehicle	Position	Sub Model
2011 - Jeep Wrangler	Front	Rubicon

3 In Stock

$733.09 CAD

$879.71 CAD

Brand	Motive Gear
Part #	M92D44-373RJK
Condition	New
Warehouse	B

UPC: 00698231418246

2021 Ford F-250 Super Duty Differential Ring and Pinion - Rear Motive Gear

For M275; 3.73 Ratio; With High Capacity Tow Package
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana Advantek M275
- Ring Gear Diameter: 275
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 14
- Pinion Spline Count: 32
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

2018521, LC3Z-4209-D, YG DM275-373

Additional Fitment Information:

Vehicle	Position
2021 - Ford F-250 Super Duty	Rear

1 In Stock

$1,040.28 CAD

$1,248.34 CAD

Brand	Motive Gear
Part #	M92D275-373
Condition	New
Warehouse	B

UPC: 00698231523636

1981 Chevrolet C30 Differential Bearing Kit - Rear Motive Gear

Differential Master Bearing Kit - Koyo
For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Motive Gear - Differential Master Bearing Kit - Koyo
Differential Bearing Kit
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Dana 70 Hd
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

331K, K35-2036, R70HRMKT, XL-1093-1, ZK D70-HD

Additional Fitment Information:

Vehicle	Position
1981 - Chevrolet C30	Rear

1 In Stock

$388.48 CAD

$466.18 CAD

Brand	Motive Gear
Part #	M92R70HRMK
Condition	New
Warehouse	B

UPC: 00698231034897

1968 Buick Electra Differential Bearing Kit - Rear Motive Gear

Differential Master Bearing Kit - Timken
For GM 8.875" (12 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Motive Gear - Differential Master Bearing Kit - Timken
Differential Bearing Kit
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 8.875 Car
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

35-2019, 83-1019-1, R12CRMK, XL-1019-1, YK GM12P

Additional Fitment Information:

Vehicle	Position
1968 - Buick Electra	Rear

3 In Stock

$208.64 CAD

$250.37 CAD

Brand	Motive Gear
Part #	M92R12CRMKT
Condition	New
Warehouse	B

UPC: 00698231359532

2007 Chevrolet Avalanche Differential Bearing Kit - Rear Motive Gear

Differential Master Bearing Kit - Koyo
For GM 9.5" (14 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Motive Gear - Differential Master Bearing Kit - Koyo
Differential Bearing Kit
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.