Shop By Product Matching "msd"

Choose a Year for your vehicle

Showing 1 - 10 of 453 products

Sort:

Show:

Image

SKU

Product

Rating

Price

Wiring Harness Connector MSD

Universal

MSD Non-Insulated Connector Kit
MSD Non-Insulated Connector Kit; 150 Piece; Includes Butt Connectors/Female And Male Disconnectors/Ring Terminals/Spade Terminals; Fits Wire Sizes 14-22 AWG;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Material For Ring And Spade Terminals: Tin Plated Copper
- Material For Butt And Female/Male Connectors: Tin Plated Brass
- Wire Sizes From 14-22 AWG
- 150 Piece Kit
Wiring the best ignition on the market requires quality electrical connectors. MSD now offers various electrical connector and heat shrink kits for all your wiring needs. Our offerings include Weathertight, Insulated, Non-insulated, Superseal, Open Barrel, Solder Sleeve Wire Splice and Heat Shrink kits. Proper electrical connections ensure safety, reliability and maximum current flow to all your cars electronics. Need crimpers to complete the job? Be sure to check out our full line of specialty crimping tools and wire your car like a pro.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

1 In Stock

$32.99 CAD

$39.59 CAD

Brand	MSD
Part #	M468196MSD
Condition	New
Warehouse	B

Audio Noise Suppressor MSD

Universal

Noise Filter Capacitor
Noise Filter Capacitor; 26 KUFD;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Recommended for use on MSD 7 and 8 installations
- Prevents interference from EMI noise
If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. When the MSD draws current, it will draw through the Noise Filter instead of directly from the battery, so all other accessories that operate off 12 volts, like the radio, fuel pump, or the engine computer, will be unaffected by the MSD.The Noise Filter will also prevent damage to the MSD during jump-starts and will keep a vehicles 12-volt line clean by removing any voltage and current surges that could interfere with the operation of some MSD accessories such as the Soft Touch Rev Control or the Two Step Module Selector. It is recommended that the Noise Filter be used on installations with the MSD 7 and 8 Series Ignitions to prevent this interference.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

4 In Stock

$100.08 CAD

$120.10 CAD

Brand	MSD
Part #	M468830MSD
Condition	New
Warehouse	B

1967 Buick Electra Ignition Coil 8 Cyl 7.0L MSD

w/Ballast; Hardware; Chrome;Legal For Non-Emissions Controlled Vehicles Or For Race Use 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
Blaster 2 Ignition Coil; w/Ballast; Hardware; Chrome;
Blaster 2 Ignition Coil
Product Attributes:
- Spark Duration: 350 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 8 Mh
- Maximum Voltage: 45000
- Peak Current: 140 Ma
- Primary Resistance: .700 Ohms
- Secondary Resistance: 4.5k Ohms
Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- Ballast Resistor Required If Used w/Stock Points Ignition
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Chrome Metal Canister Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Buick Electra	V	-	8 Cyl 7.0L	430

1 In Stock

$126.81 CAD

$152.17 CAD

Brand	MSD
Part #	M468200MSD
Condition	New
Warehouse	B

1967 Buick Electra Ignition Coil 8 Cyl 7.0L MSD

w/Ballast; Hardware; Chrome;Legal For Non-Emissions Controlled Vehicles Or For Race Use 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
Blaster 2 Ignition Coil; w/Ballast; Hardware; Chrome;
Blaster 2 Ignition Coil
Product Attributes:
- Spark Duration: 350 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 8 Mh
- Maximum Voltage: 45000
- Peak Current: 140 Ma
- Primary Resistance: .700 Ohms
- Secondary Resistance: 4.5k Ohms
Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- Ballast Resistor Required If Used w/Stock Points Ignition
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Chrome Metal Canister Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Buick Electra	V	7047	8 Cyl 7.0L	430

1 In Stock

$126.81 CAD

$152.17 CAD

Brand	MSD
Part #	M468200MSD
Condition	New
Warehouse	B

2021 BMW M3 Skid Plate 6 Cyl 3.0L Mishimoto

Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Product Attributes:
- SellingPoint04: Retains Air Dam For Optimized Pressure Differential And Airflow Through Oil Cooler Core
- SellingPoint05: Protective Crosscuts Allow Ample Airflow While Blocking Debris
- TechSpec Overall Height (Inches): 24
- SellingPoint06: Installs In Under An Hour With No Drilling Or Cutting Required
- SellingPoint07: Includes Everything Needed For Installation
- SellingPoint01: Direct Fit For 2021+ Bmw G8x M2/m3/m4
- SellingPoint02: Protects Engine And Oil Cooler From Damage
- SellingPoint03: Constructed From High-strength Aluminum And Powdercoated For A Durable, Corrosion-resistant Finish
- TechSpec Length (Inches): 35.8
- TechSpec Minimum Yield Strength: N/a
- TechSpec Chassis Codes: G80--g82--g83--g87
- SellingPoint08: Fits Both Stock And Mishimoto Oil Coolers
- SellingPoint09: Recessed Mounting Hardware Provides Smooth Surface To Avoid Snagging On Obstacles Or Shearing Mounting Bolts
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Fitment With Competition Sport (cs) Models May Require Enlarging Holes In The Front Splitter
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 5052-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Bmw M3 I6 3.0l Twin-turbo 2021+--bmw M3 Competition I6 3.0l Twin-turbo 2021+--bmw M3 Competition Sport I6 3.0l Twin-turbo 2023+--bmw M4 I6 3.0l Twin-turbo 2021+--bmw M4 Competition I6 3.0l Twin-turbo 2021+--bmw M2 I6 3.0l Twin-turbo 2023+
- TechSpec Includes: (1) Mishimoto Aluminum Skidplate--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
Features:
- Direct fit for 2021+ BMW G8X M2/M3/M4
- Protects engine and oil cooler from damage
- Constructed from high-strength aluminum and powder coated for a durable, corrosion-resistant finish
- Retains air dam for optimized pressure differential and airflow through oil cooler core
- Protective crosscuts allow ample airflow while blocking debris
- Installs in under an hour with no drilling or cutting required
- Includes everything needed for installation
- Fits both stock and Mishimoto oil coolers
- Recessed mounting hardware provides smooth surface to avoid snagging on obstacles or shearing mounting bolts
- Mishimoto Lifetime Warranty
The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road’s surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2021 - BMW M3	L	2993	6 Cyl 3.0L	Base	-

7 In Stock

$739.24 CAD

$887.09 CAD

Brand	Mishimoto
Part #	M1NMMSD-G80-21WBK
Condition	New
Warehouse	B

UPC: 840197712504

Distributor Mechanical Advance MSD

Universal

MSD Distributor Bushing And Spring Set
MSD Distributor Bushing And Spring Set; Same Great Parts That Come With Your MSD Distributor;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits all Billet and Pro-Billet MSD Distributors
The MSD Distributor Advance Kits are the same kits that come with your MSD Distributor.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

6 In Stock

$38.72 CAD

$46.46 CAD

Brand	MSD
Part #	M468464
Condition	New
Warehouse	B

Ignition Coil MSD

Universal

MSD Smart Coil
MSD Smart Coil; 5.2 mH; 201 mJ; 0.55 Ohms; 69:1 Turns Ratio; 50000 Volts; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Excellent Reliability
- Exceptional Value
- Available In Red And Black
The MSD Smart Coil is a direct replacement for the popular IGN-1A coil. Heres the difference; it produces more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 volt or 16 volt electrical systems found in race applications. Unique elongated mounting holes accommodate IGN-1A mounting brackets, which allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right onto Holley LS cast aluminum valve covers for a super clean look. Available in red or black, theres a set ready for your build.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

2 In Stock

$160.52 CAD

$192.62 CAD

Brand	MSD
Part #	M4682893
Condition	New
Warehouse	B

Generator MSD

Universal

Pro Mag Generator
Pro Mag Generator; 12 Amp; Lightweight; Black; Fits Chevrolet Sprint Cars;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Almost 30 Percent Lighter Than Original
- Produces The Same Incredible Power As Original
- Band Clamp Mount
The increased out put of the 20 Amp pro-mag was born of racers being racers; always asking for more power. This stemmed from drag racers that were using a 12 Amp system, but just didn't require a 44 Amp system. The engineers at MSD found that with a few changes to the internals of the generator it would deliver the increased current through the same electronic points box, PN 8106. The 20 Amp magneto is a favorite in alcohol slurping engines such sportsman drafters and quick-8 racers. There are three different generators available; a band clamp design in both CW and CCW rotation, plus a model built on a Chevy distributor base. All three require the PN 8106 electronic points box. The band clamp versions are equipped with a large Ford style cap while the Chevy version uses a 4 In. cap and both are topped with heavy duty retainers.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

8 In Stock

$3,891.13 CAD

$4,669.36 CAD

Brand	MSD
Part #	M4679083
Condition	New
Warehouse	B

Distributor MSD

Universal

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/Locked-Out Timing; Chevy V8; Bronze Gear; Red;
Product Attributes:
- Distributor Type: Hei/breakerless
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
Features:
- Designed Primarily For Race Applications w/No Mech. Advance
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Supplied w/0.006 in. Oversized Bronze Gear Installed
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Adj. slip collar mounting flange for engines w/modified deck hts.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (+.006) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

8 In Stock

$698.15 CAD

$837.78 CAD

Brand	MSD
Part #	M4685501
Condition	New
Warehouse	B

Distributor MSD

Universal

Pro-Billet Distributor
Pro-Billet Distributor; Fits Chevy V8 Engines; Must Be Used w/MSD 6/7/8 Series Ignitions; Black;
Product Attributes:
- Distributor Type: Magnetic Pickup
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy V8
Features:
- CNC machined billet aluminum housing and billet aluminum base
- Will Not Accept Vacuum Advance Canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.