1960 Ford Parts


Showing 1 - 10 of 20 products
Image
SKU
Product
Rating
Price

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Burst Pressure: 230.000
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.797
    • Non Slip Grip: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
    • Micron Rating: 8.000
    • Torque Nut: No
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
3645, 3I-1412, 6018, F76006, FF833, TP1049

Additional Fitment Information:
Vehicle Block CC Engine CID
1960 - Ford Country Sedan L 2360 6 Cyl 2.4L 144

Melling
  • Stock Replacement Intermediate Shaft
  • Stock Replacement Intermediate Shaft
  • Stock
  • Product Attributes:
    • Grade Type: Standard
    • Length:
      • 9.16
      • 9.160
    • Title: Engine Oil Pump Intermediate Shaft
    • Shaft Material: Stress Proof Steel
    • Shaft Diameter:
      • 0.25
      • 0.250
  • Made In USA. A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

This Part Fits the Following OEM/Substitute Numbers:
224-61122, 53012, 601-1404, 61-122, B9T-6A618-A, BIS-60A, DIS-60A, DS-147, HIS60A, IS-60A, IS60A, OPI-60-A, TS-60-A

Additional Fitment Information:
Vehicle Block CC Engine CID
1960 - Ford F-250 V 4786 8 Cyl 4.8L 292

Melling
  • Stock Replacement Intermediate Shaft
  • Stock Replacement Intermediate Shaft
  • Stock
  • Product Attributes:
    • Grade Type: Standard
    • Length: 9.16
    • Title: Engine Oil Pump Intermediate Shaft
    • Shaft Material: Stress Proof Steel
    • Shaft Diameter: 0.25
  • Made In USA. A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

Additional Fitment Information:
Vehicle Block CC Engine CID
1960 - Ford F-250 V 4786 8 Cyl 4.8L 292

Wix
  • WIX Spin-On Lube Filter
  • Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Capacity: 0.00
    • Duty Type: Ld
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Synthetic
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1960 - Ford P-100 L 2360 United States 6 Cyl 2.4L 144

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1960 - Ford Country Squire V 5769 United States 8 Cyl 5.8L 352

Sealed Power
  • Engine Valve Lifter
  • Hydraulic Lifter
  • Sealed Power HT-2083 Lifter (Pack of 4)
  • Product Attributes:
    • Design Feature 1: Hydraulic
  • Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.
  • Suggested Purchase Quantity: 16
    • Most jobs typically require 16 of this item.

This Part Fits the Following OEM/Substitute Numbers:
213-1669, 362083, B5Q6500A, B8S6500A, C0AE6500A, C1VE6500C, C3SZ6500A, C4TZ-6500A, C4TZ6500B, C6AZ6500A, C8AZ6500A, E6TZ-6500A, EAD6500D, EBJ6500A, ECU6500A, EDG6500A, H2083, HA2083...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Valves Fuel Type Engine Fuel Delivery Type Fuel Delivery SubType Engine VIN Aspiration CID
1960 - Ford Fairlane V 5769 OHV 16 GAS 8 Cyl 5.8L CARB 2BBL X Naturally Aspirated 352

FelPro
  • Intake Manifold Gasket Set
  • Excludes Special Duty
  • FEL-PRO MS 90145 Intake Manifold Gasket Set
  • Product Attributes:
    • Part Design or Feature or Use: Open Heat Passage
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1960 - Ford Country Squire V 5769 Lower 8 Cyl 5.8L 352

FelPro
  • Intake Manifold Gasket Set
  • FEL-PRO MS 90145 Intake Manifold Gasket Set
  • Product Attributes:
    • Part Design or Feature or Use: Open Heat Passage
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
23029, 23062, 7418999, B8AZ9433A, C2AZ9433A, C3AZ9433A, C3AZ9433E, C3AZ9433F, C3AZ9433G, C3AZ9433J, C6AZ9433A, C6AZ9433B, C6AZ9433C, C6AZ9433D, C6AZ9433E, C8MY9433A, MS 3105, MS15166X...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1960 - Ford F-100 V 5441 Lower 8 Cyl 5.4L 332

FelPro
  • Valve Cover Gasket Set
  • Rubber
  • FEL-PRO VS 13049 R Valve Cover Gasket Set
  • Product Attributes:
    • Part Material: Fel-coprene Rubber
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
19330, 7432875, CV 898CE, VS38308R, Z2182

Additional Fitment Information:
Vehicle Block CC Engine CID
1960 - Ford Courier Sedan Delivery V 5769 8 Cyl 5.8L 352

Fram
  • FRAM, HP1, Oil Filter
  • FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
  • Product Attributes:
    • Non Slip Grip: No
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 500.000
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 22.000
    • Marine Approved: No
    • Outside Diameter: 3.672
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.

This Part Fits the Following OEM/Substitute Numbers:
3120MP, 33120, 86120MP, BF7613, BF992, FF204

Additional Fitment Information:
Vehicle Block CC Engine CID
1960 - Ford Fairlane L 3655 6 Cyl 3.6L 223
Showing 1 - 10 of 20 products

Loading...