1985 Mitsubishi Parts

Choose a Model for your 1985 Mitsubishi


Showing 1 - 10 of 91 products
Image
SKU
Product
Rating
Price

Fram
  • FRAM, PH3985, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.420
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: M20x1.5
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.656
    • Gasket Outside Diameter: 2.790
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
1-8A, 18-7917, 6005021346, 95-01-110, L339, LF115, LF3536, PFL1A, PL30001

Additional Fitment Information:
Vehicle Block CC Engine CID
1985 - Mitsubishi Mighty Max L 1997 4 Cyl 2.0L 122

Motorad
  • Engine Oil Filler Cap
  • Product Attributes:
    • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
    • Vented: No
    • Neck Diameter: 1.41 In
    • Shell Diameter: 2.71 In
  • Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

This Part Fits the Following OEM/Substitute Numbers:
10088, 11088, 12C36, 14088, 2078-290323, 2651011500, 2651011502, 2651011510, 2651035000, 31085, 703-1854, 8088, 9MO88, MD008784, MD132260, MD311885, MD314087, MD317439...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1985 - Mitsubishi Mirage L 1468 4 Cyl 1.5L 90

Fram
  • FRAM, PH3950, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 3.130
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.078
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Material: Base
    • Gasket Type: Base
    • Inside Thread Diameter: M20x1.5
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 3.656
    • Gasket Outside Diameter: 3.531
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
14957, 1777935, AL8873, LF3664, LF406, LF509, M1HP, PF454

Additional Fitment Information:
Vehicle
1985 - Mitsubishi Montero

Pro-Tec
  • PRO-TEC Spin-On Lube Filter
  • Oil Drain Intervals of up to 5000 miles
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 275
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 13-19
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)

This Part Fits the Following OEM/Substitute Numbers:
1381, 140, 143A, 144A, 1718608, 21381, 2224519, 5001202774, 51381, 61381, 618-51381, 85381, 85626HD, 94263, BF193, CF144, CF2856, CF2856AP...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1985 - Mitsubishi Montero L 2555 Canada 4 Cyl 2.6L 156

Wix
  • WIX Spin-On Lube Filter
  • Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 275
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 13-19
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 001 181, 0 451 103 089, 0 451 103 106, 0 451 103 224, 0 451 105 191, 0 986 452 006, 0 986 452 016, 0 986 452 916, 0000230370, 00013505381, 0324-14300, 041-8086, 0410571, 0410639, 0410724, 0410736, 0410738, 0410784...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1985 - Mitsubishi Galant L 2351 Canada 4 Cyl 2.4L -

Dorman
  • Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
  • 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
  • Product Attributes:
    • Thread Size: M14-1.50
    • Threads Per Inch: 0
    • SAE or Metric: Metric
    • Package Contents: 5 Oil Drain Plugs
    • Head Size (SAE/Metric): 16 Mm
    • Length: 0.857
    • Magnetic: No
    • Thread Type: Fine
    • Oversized Thread: No
    • Bolt Grade: 5.8
    • Special Tool Required: No
    • Gasket Type: Gasket
    • Socket Points: 6
    • Head Drive Type: Hex
    • Describe Type: Pilot Point
    • Program: Universal Oil
    • Drain Method: Conventional
  • Features:
    • Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
    • Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
    • Cost-effective solution - offers original equipment performance at competitive price
    • Quality tested - this part has undergone try-on testing to ensure a quality seal
  • This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.

This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1985 - Mitsubishi Mighty Max L 1997 4 Cyl 2.0L 122

Full
Additional Fitment Information:
Vehicle
1985 - Mitsubishi Montero

NOK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
1985 - Mitsubishi Mighty Max L 2346 4 Cyl 2.3L SPX RWD 143

NOK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: 06/1984-

Additional Fitment Information:
Vehicle Prod. Date Range
1985 - Mitsubishi Mirage Fr:06-00-84

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
1985 - Mitsubishi Mirage
Showing 1 - 10 of 91 products

Loading...