1987 Mitsubishi Parts

Choose a Model for your 1987 Mitsubishi


Showing 1 - 10 of 125 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Mitsubishi Van L 2351 4 Cyl 2.4L -

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Mitsubishi Precis L 1468 Rear 4 Cyl 1.5L 90

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Rear Muffler Inlet

Additional Fitment Information:
Vehicle
1987 - Mitsubishi Galant

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • To Converter

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Mitsubishi Cordia L 1997 4 Cyl 2.0L 122

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: -05/31/1986

Additional Fitment Information:
Vehicle Block CC Engine CID Prod. Date Range
1987 - Mitsubishi Mirage L 1468 4 Cyl 1.5L 90 To:05-31-86

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: 05/1986-, Catalyst Outlet

Additional Fitment Information:
Vehicle Block CC Engine Drive Type CID Prod. Date Range
1987 - Mitsubishi Mighty Max L 1997 4 Cyl 2.0L RWD 122 Fr:05-00-86

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
1987 - Mitsubishi Precis

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Mitsubishi Cordia L 1997 4 Cyl 2.0L 122

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter-2.00in.
  • Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Universal Catalytic Converter-2.00in.
  • 91000 Series OBDII Compliant Universal Catalytic Converter
  • Product Attributes:
    • Inlet Diameter: 2.000 In.
    • WARNING CA Proposition 65: No
    • Body Width: 5.500 In.
    • Outlet Attachment Type: Weld-on
    • Body Height: 3.750 In.
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Heat Shield Included: Yes
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 9.000 In.
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Outlet Diameter: 2.000 In.
    • Oxygen Sensor Location: None
    • Heat Shield Attached: Yes
    • Overall Length: 13.000 In.
    • Subtitles: Federal / Epa Compliant
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.000 In.
    • Outlet Outside Diameter: 2.000 In.
    • Main Piping Diameter: 2.000 In.
    • Converter Body Size: Oem
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Body Shape: Oval
    • Core Substrate Material: Ceramic
    • Sensor Port Count: 0
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
    • Outlet Type: Weld-on
  • Features:
    • For Small To Medium Weight Vehicles
    • Compact Size
    • Perfect For A Variety Of Import And Domestic
  • MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Mitsubishi Starion L 2555 Rear 4 Cyl 2.6L 156

MagnaFlow Performance Exhaust
  • Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • 91000 Series OBDII Compliant Universal Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Mitsubishi Starion L 2555 Rear 4 Cyl 2.6L 156
Showing 1 - 10 of 125 products

Loading...