2003 Mitsubishi Parts

Choose a Model for your 2003 Mitsubishi

Diamante Eclipse Galant Lancer Montero Montero Sport Outlander

Showing 1 - 10 of 356 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Mitsubishi Lancer Suspension Strut Bellows - Front KYB

Jounce Bumper and Bellows
Strut Boots
Product Attributes:
- Feature and Benefit 4: Protects The Upper Seal And Bushing
- Feature and Benefit 1: Superior Quality Boot Helps Protect The Strut Shaft From Leak-causing Dirt And Debris
- Feature and Benefit 3: Built With Design And Quality That Matches Or Exceeds Oe
- Feature and Benefit 2: Poly Foam Bumper Prevents The Strut From Bottoming Out
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

143060, 63622

Additional Fitment Information:

Vehicle	Position	Sub Model
2003 - Mitsubishi Lancer	Front	Evolution

2 In Stock

$34.70 CAD

$41.64 CAD

Brand	KYB
Part #	K11SB104
Condition	New
Warehouse	B

UPC: 781552956044

2003 Mitsubishi Lancer Suspension Ball Joint - Front Lower Moog

Ball Joint
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
MOOG K500063 Ball Joint
Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

104500063, 260-1724, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 5105041AA, 5105041AB, 5105041AC...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Aspiration
2003 - Mitsubishi Lancer	Front Lower	Naturally Aspirated

5 In Stock

$46.90 CAD

$56.28 CAD

Brand	Moog
Part #	M12K500063
Condition	New
Warehouse	B

UPC: 080066025476

2003 Mitsubishi Lancer Suspension Ball Joint - Front Lower Moog

Ball Joint
Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
MOOG K500063 Ball Joint
Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Aspiration
2003 - Mitsubishi Lancer	Front Lower	Naturally Aspirated

5 In Stock

$46.90 CAD

$56.28 CAD

Brand	Moog
Part #	M12K500063
Condition	New
Warehouse	B

UPC: 080066025476

2003 Mitsubishi Lancer Suspension Stabilizer Bar Link Kit - Rear Moog

Stabilizer Bar Link Kit
MOOG K90389 Stabilizer Bar Link Kit
Product Attributes:
- Sleeve Length:
  - 0.984
  - 25.0
- End 1 Type: Bolt On
- Bolt Length:
  - 126.5
  - 4.980
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

101-5951, 18335, 265-1522, 45G0312, 46G0312A, 536-685, 545-1312, 545-1312B, 606.42069, JTS708, K90389, MK90389, SK90389, SL400

Additional Fitment Information:

Vehicle	Position
2003 - Mitsubishi Lancer	Rear

1 In Stock

$14.86 CAD

$17.83 CAD

Brand	Moog
Part #	M12K90389
Condition	New
Warehouse	B

UPC: 080066322445

2003 Mitsubishi Diamante Alignment Camber Kit - Front Moog

Camber Adjusting Kit
From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
MOOG K90473 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

13321A, 264-3641, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, AA3641, K90473, MS90002, VV13321A

Additional Fitment Information:

Vehicle	Position
2003 - Mitsubishi Diamante	Front

2 In Stock

$31.08 CAD

$37.30 CAD

Brand	Moog
Part #	M12K90473
Condition	New
Warehouse	B

UPC: 080066029153

2003 Mitsubishi Eclipse Alignment Camber Kit - Rear Moog

Camber Adjusting Kit
From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
MOOG K90473 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2003 - Mitsubishi Eclipse	Rear

2 In Stock

$31.08 CAD

$37.30 CAD

Brand	Moog
Part #	M12K90473
Condition	New
Warehouse	B

UPC: 080066029153

2003 Mitsubishi Diamante Alignment Camber Kit - Front Moog

Camber Adjusting Kit
From Minus 1.75 to Plus 1.75 Degrees of Change with 12 (mm) Bolts Double Offset
MOOG K9757 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

13251A, 2225, 264-3621, 264-3641, 264-3668, 41-147, 411470, 45K18021, 45K18035, 45K18048, 616-1021, 616-1035, 616-1048, 616-1048B, 770500, AA3621, AA3641, AA3668...VIEW MORE

Additional Fitment Information:

Vehicle	Position
2003 - Mitsubishi Diamante	Front

2 In Stock

$35.66 CAD

$42.79 CAD

Brand	Moog
Part #	M12K9757
Condition	New
Warehouse	B

UPC: 080066010861

2003 Mitsubishi Lancer Suspension Control Arm and Ball Joint Assembly - Front Right Lower Dorman

Suspension Control Arm
Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Light
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material: Rubber
- Ball Joint Installed: Yes
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

This Part Fits the Following OEM/Substitute Numbers:

1515002, 2605742, 4013A256, 4013A274, 507-1454, 5CB80023, 623.46007, CA581B, CAK620345, CB67074, CB67074PR, CB80023, CK620345, CMS80122, FA4637, GS80122, JTC7580, K620345...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Aspiration
2003 - Mitsubishi Lancer	Front Right Lower	Naturally Aspirated

1 In Stock

$112.18 CAD

$134.62 CAD

Brand	Dorman
Part #	D18520-886
Condition	New
Warehouse	B

2003 Mitsubishi Outlander Alignment Camber Kit - Front Moog

Camber Adjusting Kit
From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 14 (mm) Bolts
MOOG K90474 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

13322A, 264-3642, 41214, 45K18036, 616-1030, 616-1036, 787504, AA3642, AK90399, K90474, MS50202, MS60005, VV13322A

Additional Fitment Information:

Vehicle	Position
2003 - Mitsubishi Outlander	Front

Brand	Moog
Part #	M12K90474
Condition	New
Warehouse	B

UPC: 080066032153

2003 Mitsubishi Eclipse Alignment Camber Kit - Front Moog

Camber Adjusting Kit
Single Offset Adjuster with 16 (mm) Bolts From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Adapter Plate Not Included
MOOG K90476 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.