2010 Transfer Case Parts


Showing 1 - 10 of 400 products
Image
SKU
Product
Rating
Price

Dorman
  • Transfer Case Shift Motor
  • Fits NVG246 Transfer Case
  • Product Attributes:
    • Package Contents: Motor Assembly
    • Wiring Harness Included: Yes
    • Terminal Type: Pin
    • Housing Material: Metal
  • Features:
    • Direct replacement - this transfer case motor fits and performs like the original motor on certain General Motors and Dodge trucks and SUVs
    • Confirm fitment - made for vehicles with the NVG246 transfer case
    • on GM vehicles, it corresponds with RPO code NP8, found in the glovebox
    • 100% new - this transfer case motor assembly is entirely new, not remanufactured like competitors, delivering optimal reliability
    • Trustworthy quality - backed by team of engineers and product experts in the United States and over a century of automotive experience
  • This transfer case shift motor directly replaces the motor found on select General Motors and Dodge Ram 1500 trucks with the New Venture Gear (NVG) 246 transfer case. On Cadillac, Chevrolet and GMC vehicles, it corresponds with RPO Code NP8, which can be confirmed in your vehicle's glovebox.

This Part Fits the Following OEM/Substitute Numbers:
19125571, 19125640, 48-113, 5170543AA, 88962314, SK600910

Additional Fitment Information:
Vehicle
2010 - Dodge Ram 1500

Dorman
  • Transfer Case Shift Motor
  • Product Attributes:
    • Package Contents: Motor Assembly
    • Wiring Harness Included: No
    • Terminal Type: Pin
    • Housing Material: Metal
  • Features:
    • Direct replacement - this transfer case motor fits and performs like the original motor on certain vehicle applications
    • Durable construction - made with factory-style electrical connector and weathertight seal to prevent corrosion
    • 100% new - this transfer case motor is entirely new, not remanufactured like competitors
    • Quality assured - vehicle-specific application has been validation tested to ensure quality
  • Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

This Part Fits the Following OEM/Substitute Numbers:
48-205, A421420, DC3Z7G360B, UMM4356, YC3Z7G360AA

Additional Fitment Information:
Vehicle Drive Type
2010 - Ford F-350 Super Duty 4WD

National Bearing
  • Ball Bearing
  • with New Process 243D Transfer Case with Part Time 4WD 2 Speed
  • National 207 Ball Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.040
    • Design: Single Row Radial
    • Width (Inch): 0.669
    • Outer Race Outside Diameter (Inch): 2.835
    • Outer Race Outside Diameter (MM): 72.000
    • Inner Race Radius (MM): 1.020
    • Inner Race Bore (Inch): 1.378
    • Inner Race Width (MM): 17.000
    • Inner Race Width (Inch): 0.669
    • Outer Race Width (Inch): 0.669
    • Outer Race Width (MM): 17.000
    • Bore (Inch): 1.378
    • Inner Race Bore (MM): 35.000
    • Outer Race Radius (MM): 1.020
    • Outside Diameter (Inch): 2.835
    • Outer Race Radius (Inch): 0.040
    • Part Description: Ball Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Ram 1500 Rear 4WD

Crown Automotive
  • For Use with NVG245 Transfer Case~For Use with NVG140 Transfer Case
  • Transfer Case Output Shaft Seal; Front;
  • Transfer Case Output Shaft Seal
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Output Shaft Seal
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position
2010 - Jeep Commander Front

Crown Automotive
  • Transfer Case Switch;
  • Transfer Case Switch
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Switch
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Sub Model
2010 - Dodge Ram 1500 TRX

Crown Automotive
  • For Use w/NSG370 Manual Transmission
  • Input Bearing Retainer; For Use w/NSG370 Manual Transmission;
  • Input Bearing Retainer
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
  • Features:
    • Input Bearing Retainer

Additional Fitment Information:
Vehicle Transmission Manuf. Code
2010 - Jeep Wrangler NSG370

National Bearing
  • Oil Seal
  • with New Process 243D Transfer Case with Part Time 4WD 2 Speed
  • National 3946 Oil Seal
  • Product Attributes:
    • Shaft (Inch): 1.875
    • Sealing Material: Nitrile
    • Width (Inch): 0.485
    • Redicoat: Yes
    • Flanged Outside Diameter (Inch): 3.000
    • Inside Diameter:
      • 1.875
      • 47.630
    • Flanged Outside Diameter (MM): 76.200
    • Helix Type: Bi-directional Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.750
    • Outside Diameter:
      • 2.754
      • 69.950
    • Outside Diameter (Inch): 2.754
    • Shaft (MM): 47.630
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
04167735, 04762899, 04798125, 05938609, 12384477, 14095610, 15580381, 18662, 18758, 1L24-7B215HA, 3946, 4167735, 4167930, 4318662, 4338968, 4412990, 4505469, 47583...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Ram 1500 Front 4WD

National Bearing
  • Oil Seal
  • Boot Type with 1.500 (in) Width with Borg-Warner 4418 Transfer Case with Part Time 4WD 2 Speed
  • National 4333N Oil Seal
  • Product Attributes:
    • Shaft (Inch): 1.886
    • Sealing Material: Polyacrylate
    • Width (Inch): 0.350
    • Overall Width with Side Lip (Inch): 1.460
    • Redicoat: Yes
    • Overall Width with Side Lip (MM): 37.084
    • Flanged Outside Diameter (Inch): 3.050
    • Flanged Outside Diameter (MM): 77.470
    • Inside Diameter:
      • 1.886
      • 47.904
    • Helix Type: Counter-clockwise-spiral Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.699
    • Outside Diameter:
      • 2.704
      • 68.680
    • Outside Diameter (Inch): 2.704
    • Shaft (MM): 47.904
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
04746258, 0501 310 504, 10140538, 15661460, 18860, 18999, 24207336, 24236132, 4333N, 4746258, 48217, 5743751, 6L34-7B215-BA, 6L34-7B215AA, 6L3Z-7B215-A, 8677463, E4TZ-7B215A, JO-124...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Ford F-150 Front AWD

National Bearing
  • Oil Seal
  • Full Time 4WD with Borg-Warner 4485 Transfer Case 1 Speed
  • National 4503N Oil Seal
  • Product Attributes:
    • Shaft (Inch): 1.886
    • Sealing Material: Polyacrylate
    • Width (Inch): 0.469
    • Overall Width with Side Lip (Inch): 1.375
    • Overall Width with Side Lip (MM): 34.930
    • Flanged Outside Diameter (Inch): 3.270
    • Inside Diameter:
      • 1.886
      • 47.900
    • Flanged Outside Diameter (MM): 83.058
    • Helix Type: Bi-directional Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.750
    • Outside Diameter:
      • 2.765
      • 70.230
    • Outside Diameter (Inch): 2.765
    • Shaft (MM): 47.900
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
1300-044-006, 1300044006, 15580329, 15662465, 18507, 18687, 1900-044-030, 24261932, 2L14-7B215-CA, 2L14-7B215AA, 2L1Z-7B215-A, 3363012, 4503N, 48132, 68089735AA, 68402279AA, 88984500, 89059495...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Cadillac Escalade EXT Rear AWD

National Bearing
  • Oil Seal
  • Full Time 4WD with Borg-Warner 4493 Transfer Case 2 Speed
  • National 4503N Oil Seal
  • Product Attributes:
    • Shaft (Inch): 1.886
    • Sealing Material: Polyacrylate
    • Width (Inch): 0.469
    • Overall Width with Side Lip (Inch): 1.375
    • Overall Width with Side Lip (MM): 34.930
    • Flanged Outside Diameter (Inch): 3.270
    • Inside Diameter:
      • 1.886
      • 47.900
    • Flanged Outside Diameter (MM): 83.058
    • Helix Type: Bi-directional Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.750
    • Outside Diameter:
      • 2.765
      • 70.230
    • Outside Diameter (Inch): 2.765
    • Shaft (MM): 47.900
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Hummer H3T Rear 4WD
Showing 1 - 10 of 400 products

Loading...