2012 Transfer Case Parts

Choose a Make for your 2012 vehicle

Showing 1 - 10 of 363 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2012 Ford F-350 Super Duty Transfer Case Motor Dorman

Transfer Case Shift Motor
Product Attributes:
- Package Contents: Motor Assembly
- Wiring Harness Included: No
- Terminal Type: Pin
- Housing Material: Metal
Features:
- Direct replacement - this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction - made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new - this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured - vehicle-specific application has been validation tested to ensure quality
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

This Part Fits the Following OEM/Substitute Numbers:

48-205, A421420, DC3Z7G360B, UMM4356, YC3Z7G360AA

Additional Fitment Information:

Vehicle	Drive Type
2012 - Ford F-350 Super Duty	4WD

6 In Stock

$208.88 CAD

$250.66 CAD

Brand	Dorman
Part #	D18600-805
Condition	New
Warehouse	B

2012 Ram 1500 Transfer Case Output Shaft Bearing - Front Rearward National Bearing

Ball Bearing
with Borg-Warner 4445 Transfer Case with Part Time 4WD 2 Speed
National 207 Ball Bearing
Product Attributes:
- Inner Race Radius (Inch): 0.040
- Design: Single Row Radial
- Width (Inch): 0.669
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (MM): 72.000
- Inner Race Radius (MM): 1.020
- Inner Race Bore (Inch): 1.378
- Inner Race Width (MM): 17.000
- Inner Race Width (Inch): 0.669
- Outer Race Width (Inch): 0.669
- Outer Race Width (MM): 17.000
- Bore (Inch): 1.378
- Inner Race Bore (MM): 35.000
- Outer Race Radius (MM): 1.020
- Outside Diameter (Inch): 2.835
- Outer Race Radius (Inch): 0.040
- Part Description: Ball Bearing
Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859..., 053016207, 060162070, 070150, 070525, 0811062070, 0811326070, 09262-35038, 09262-35042, 09262-35043, 1-09800118-0, 10072, 1013829, 101608, 105E-7065A, 108706, 108766, 11014, 11063, 1130157, 114991, 117610HI, 1200198, 120118, 1207, 1207D, 12334814, 12384947, 12T19, 134030, 144217, 144991, 150532, 151258, 153198, 15580228, 15581949, 170253, 171658B, 178285, 1828X154, 18698A, 190963, 19UVA089, 1L24-7025DA, 1L2Z-7025DA, 201301, 20308D, 207, 20705250, 207K, 207S, 210024, 2100246, 211-501-287, 211-507-287, 214749, 222035, 225953, 227807, 236120, 2408T2, 2466224, 2570326, 26117200, 27387925, 286, 2900-60071, 29982-80050, 2K5678, 2K6508, 300207, 300207-2, 300207-3, 300207-5, 300207-9, 30186100, 301X2, 3021043, 30210439, 306793, 31238, 3134659R91, 313937, 3148966R91, 3185017, 3188U, 31T-4812, 3207, 3207X1270A, 3216466R91, 32203-CG000, 322186, 33139-EA30A, 3326.10, 332607, 35101, 35A342, 3691, 37203, 37510-86160, 380129R91, 390185, 3B0147, 3PS288, 40007, 40029, 4013TS, 40707, 418355, 4253864, 42538645, 425722, 43207, 43329-21400, 4338321, 4452D, 45829-34100, 45829-36040, 45829-36041, 45829-36050, 462025, 465532, 466347, 46AX14, 46AX299, 47313-H1000, 474910R91, 48170, 48178, 4897981AA, 4897981AB, 5-2013, 5-2015, 5-2056, 50059-280-08364, 5040D1023, 507220, 51-601-977-01-007, 53317, 540008, 550010-1, 550010-2, 550010-2B, 550010-3, 550010-4, 550010-5, 5579988, 5740510, 589747, 5P1409, 600091, 602358, 602359, 610978C91, 619166, 61966, 6207, 6207-J, 6207C3, 6207J, 6207JEM, 63026D, 632569M1, 63663R91, 64-00261, 64U4A, 654299, 659473R91, 6600091, 6618788, 68055334AA, 68055334AB, 6950102, 700311R91, 70035, 700498R91, 700545R91, 70085, 7011014, 701445R91, 703332, 704769R91, 704769R92, 70523, 705750R91, 707813, 71270C91, 753207R91, 75531, 758312R91, 758357R91, 76491H, 7706207, 782125, 7F1248, 8-94422172-0, 8-94422172-1, 8002696, 8130807, 8136626, 83503501, 84483, 845106R91, 845196R91, 845704R91, 850725C91, 85582, 86472, 87A-7065, 88091, 8916, 89338, 896, 8A-7065, 8H9789, 9-90016, 903207, 90363-35012, 90363-35013, 90601-0015, 907425, 907808, 91002-PL3-A02, 91005-PE6-004, 91005-PE6-008, 91005-PE6-014, 91005-PL3-A01, 91005-PL3-A03, 91005-PL3-A030, 91005-PL3-A04, 91005-PL3-A06, 91245, 914524, 91950, 940016207, 9411324, 9411898, 9411902, 9411988, 9439608, 9442121, 94422172, 949-553P26C, 94X207, 94X27, 94X3, 954504, 954575, 954657, 954879, 96057713, 96059926, 96100-60270-00, 9960-66-207, 9981242, 9D3207, A10320X, A29183, A7724, AMK777, B207, B8QH-2873A, BB1719, BB19203, BB6207, C235, C30Z-2873, C3OZ-2873A, CB1161, CR2641, CR7101, CR7102, D94AX207, DV1595, DXS73, E75GE9, F0TZ-7025B, FW261, GB6207, GHB103, GO52, GRB203, GTB7271, H5762, J8130807, J8136626, JD30079, JD30084, JD7128, JD9344, JD9387, JDX72060, K10072, K11604, KW1010, KW5294, L0148-003, L0158-003, L0158-007, L81-1793, M143B, MD706565, MD706566, MD716594, MD723159, MD723519, MS550008, MS556007, N020740, N20740, N6207, NA01-27-143, P40008, QWB494, QWB714, R22210, R6207, R6520, RTC3406, RTC6025, S16093, S3347, SAE207, SF7264, ST205, ST205A, ST208A, STC1130, T9291, TB3207, U20852N026, VF2893, VKBA1417, VKBA1418, VKBA748, VKBA910, VT2893, W72-316, W72-382, X101608, X35101, X653641, XAD173A, XC411143, Y207, YL8Z-4240AA, ZAD173A VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
2012 - Ram 1500	Front Rearward	4WD

1 In Stock

$41.81 CAD

$50.17 CAD

Brand	National Bearing
Part #	B42207
Condition	New
Warehouse	B

UPC: 724956068975

2012 Jeep Wrangler Transfer Case Output Shaft Bearing - Front Crown Automotive

Front Output-Rear Bearing
Transfer Case Output Shaft Bearing; Front;
Transfer Case Output Shaft Bearing
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Transfer Case Output Shaft Bearing
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Position
2012 - Jeep Wrangler	Front

3 In Stock

$22.03 CAD

$26.44 CAD

Brand	Crown Automotive
Part #	C1Y4269189
Condition	New
Warehouse	B

2012 Ram 1500 Transfer Case Switch Crown Automotive

Transfer Case Switch;
Transfer Case Switch
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Transfer Case Switch
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
2012 - Ram 1500

10 In Stock

$69.38 CAD

$83.26 CAD

Brand	Crown Automotive
Part #	C1Y5083138AA
Condition	New
Warehouse	B

2012 Jeep Wrangler Transfer Case Input Shaft Seal Crown Automotive

For Use w/NV241 And NV241OR Transfer Cases
Transfer Case Input Seal;
Transfer Case Input Seal
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Transfer Case Input Seal
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
2012 - Jeep Wrangler

5 In Stock

$14.73 CAD

$17.68 CAD

Brand	Crown Automotive
Part #	C1Y5019020AA
Condition	New
Warehouse	B

2012 Jeep Wrangler Transfer Case Output Shaft Seal - Rear Crown Automotive

For Use w/NV241 And NV241OR Transfer Cases
Transfer Case Output Shaft Seal; Rear;
Transfer Case Output Shaft Seal
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Transfer Case Output Shaft Seal
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Position
2012 - Jeep Wrangler	Rear

5 In Stock

$21.47 CAD

$25.76 CAD

Brand	Crown Automotive
Part #	C1Y5013019AA
Condition	New
Warehouse	B

2012 Ford F-150 Transfer Case Output Shaft Seal - Front National Bearing

Oil Seal
Boot Type with 1.500 (in) Width with Borg-Warner 4418 Transfer Case with Part Time 4WD 2 Speed
National 4333N Oil Seal
Product Attributes:
- Shaft (Inch): 1.886
- Sealing Material: Polyacrylate
- Width (Inch): 0.350
- Overall Width with Side Lip (Inch): 1.460
- Redicoat: Yes
- Overall Width with Side Lip (MM): 37.084
- Flanged Outside Diameter (Inch): 3.050
- Flanged Outside Diameter (MM): 77.470
- Inside Diameter:
  - 1.886
  - 47.904
- Helix Type: Counter-clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.699
- Outside Diameter:
  - 2.704
  - 68.680
- Outside Diameter (Inch): 2.704
- Shaft (MM): 47.904
- Part Description: Oil Seal
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:

04746258, 0501 310 504, 10140538, 15661460, 18860, 18999, 24207336, 24236132, 4333N, 4746258, 48217, 5743751, 6L34-7B215-BA, 6L34-7B215AA, 6L3Z-7B215-A, 8677463, E4TZ-7B215A, JO-124...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
2012 - Ford F-150	Front	AWD

Brand	National Bearing
Part #	N194333N
Condition	New
Warehouse	B

UPC: 724956126903

2012 Ram 1500 Transfer Case Output Shaft Seal - Rear National Bearing

Oil Seal
with Borg-Warner 4445 Transfer Case with Part Time 4WD 2 Speed
National 4503N Oil Seal
Product Attributes:
- Shaft (Inch): 1.886
- Sealing Material: Polyacrylate
- Width (Inch): 0.469
- Overall Width with Side Lip (Inch): 1.375
- Overall Width with Side Lip (MM): 34.930
- Flanged Outside Diameter (Inch): 3.270
- Inside Diameter:
  - 1.886
  - 47.900
- Flanged Outside Diameter (MM): 83.058
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.750
- Outside Diameter:
  - 2.765
  - 70.230
- Outside Diameter (Inch): 2.765
- Shaft (MM): 47.900
- Part Description: Oil Seal
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:

1300-044-006, 1300044006, 15580329, 15662465, 18507, 18687, 1900-044-030, 24261932, 2L14-7B215-CA, 2L14-7B215AA, 2L1Z-7B215-A, 3363012, 4503N, 48132, 68089735AA, 68402279AA, 88984500, 89059495...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
2012 - Ram 1500	Rear	4WD

Brand	National Bearing
Part #	N194503N
Condition	New
Warehouse	B

UPC: 724956131204

2012 Cadillac Escalade EXT Transfer Case Output Shaft Seal - Rear National Bearing

Oil Seal
Full Time 4WD with Borg-Warner 4485 Transfer Case 1 Speed
National 4503N Oil Seal
Product Attributes:
- Shaft (Inch): 1.886
- Sealing Material: Polyacrylate
- Width (Inch): 0.469
- Overall Width with Side Lip (Inch): 1.375
- Overall Width with Side Lip (MM): 34.930
- Flanged Outside Diameter (Inch): 3.270
- Inside Diameter:
  - 1.886
  - 47.900
- Flanged Outside Diameter (MM): 83.058
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.750
- Outside Diameter:
  - 2.765
  - 70.230
- Outside Diameter (Inch): 2.765
- Shaft (MM): 47.900
- Part Description: Oil Seal
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Additional Fitment Information:

Vehicle	Position	Drive Type
2012 - Cadillac Escalade EXT	Rear	AWD

Brand	National Bearing
Part #	N194503N
Condition	New
Warehouse	B

UPC: 724956131204

2012 Ford F-150 Transfer Case Output Shaft Seal - Rear National Bearing

Oil Seal
with Borg-Warner 4417 Transfer Case with Part Time 4WD 1 Speed
National 4503N Oil Seal
Product Attributes:
- Shaft (Inch): 1.886
- Sealing Material: Polyacrylate
- Width (Inch): 0.469
- Overall Width with Side Lip (Inch): 1.375
- Overall Width with Side Lip (MM): 34.930
- Flanged Outside Diameter (Inch): 3.270
- Inside Diameter:
  - 1.886
  - 47.900
- Flanged Outside Diameter (MM): 83.058
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.750
- Outside Diameter:
  - 2.765
  - 70.230
- Outside Diameter (Inch): 2.765
- Shaft (MM): 47.900
- Part Description: Oil Seal
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.