2008 Mitsubishi Parts


Showing 1 - 10 of 4797 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2008 - Mitsubishi Galant L 2378 Rear 4 Cyl 2.4L -

Truxedo
  • TruXport-00-07 Dakota Quad Cab/06-08 Raider Double Cab 5ft.
  • Black
  • Dodge Dakota Quad Cab
  • TruXport(R) Tonneau Cover
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Cancer And Reproductive
      • Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Front Opening: No
    • Style: Roll-up Soft Cover
    • Install Time: 15 Minutes
    • Rails To Install: Yes
    • Low Profile: Yes
    • Actual Color: Black
    • Paintable: No
    • Works w/Toolbox: No
    • Key Lockable: No
    • Full Bed Access: No
  • Features:
    • Cover Sits 1.5 in. Above The Truck Bed
    • Providing Distinctive Good Looks
    • Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
    • Securely Fastening The Cover To The Bed
    • No Drilling Or Special Tools Required
    • Quality Leather Grain Fabric
    • Helps Protect Your Cargo From The Harshest Of Elements
    • Integrated Pre-Set Tension Control
    • Dual-Latching System To Keep The Cover Tight
    • Made In The USA
    • 5-Year Warranty
  • TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.

Additional Fitment Information:
Vehicle Bed Bed Length
2008 - Mitsubishi Raider Fleetside 63.6

Truxedo
  • TruXport-00-07 Dakota Quad Cab/06-08 Raider Double Cab 5ft.
  • Black
  • Dodge Dakota Quad Cab
  • TruXport® Tonneau Cover
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Front Opening: No
    • Style: Roll-up Soft Cover
    • Install Time: 15 Minutes
    • Rails To Install: Yes
    • Low Profile: Yes
    • Actual Color: Black
    • Paintable: No
    • Works w/Toolbox: No
    • Key Lockable: No
    • Full Bed Access: No
  • Features:
    • Cover Sits 1.5 in. Above The Truck Bed
    • Providing Distinctive Good Looks
    • Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
    • Securely Fastening The Cover To The Bed
    • No Drilling Or Special Tools Required
    • Quality Leather Grain Fabric
    • Helps Protect Your Cargo From The Harshest Of Elements
    • Integrated Pre-Set Tension Control
    • Dual-Latching System To Keep The Cover Tight
    • Made In The USA
    • 5-Year Warranty
  • TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.

Additional Fitment Information:
Vehicle Bed Bed Length
2008 - Mitsubishi Raider Fleetside 63.6

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position Body
2008 - Mitsubishi Raider Rear Crew Cab Pickup

K&N
  • Universal Clamp-On Air Filter
  • Round Tapered; OD-4.5 in./7.5 in.; Flange L-5/8; Inside Flange 6 in; Centered; Chrome End; Filter Length 6 in. Replacement Filter For Performance Intake Kit [PN57-1558]~Replacement Filter For Performance Intake Kit [PN77-1558KP]
  • Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
  • Universal Air Cleaner Assembly
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Flange Length: 0.625 In. (16mm)
    • Flange Offset: 0.000 In. (0mm)
    • WARNING CA Proposition 65: Yes
    • Base Outside Diameter: 7.500 In. (191mm)
    • Item Weight: 1.400 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 8.600 In. (218mm)
    • Filter Material: Cotton Gauze
    • Product Box Width: 8.300 In. (211mm)
    • Product Box Length: 8.400 In. (213mm)
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Item Height: 6.000 In. (152mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: 1
    • Package Content: 1
    • Top Style: Metal
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Package Contents: 1 Air Filter
    • Top Material: Chrome
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • CARB/Air Horn Diameter: 6.000 In.
    • Package Quantity: 1
    • Shape: Round Tapered
    • Top Outside Diameter: 4.500 In. (114mm)
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.27 Oz (38 Ml)
    • Flange Inside Diameter: 6.000 In. (152mm)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Flange Type: Centered
    • Package Type: Box
  • Features:
    • Designed To Increase Horsepower And Acceleration
    • High Air Flow With Excellent Filtration
    • Clamp-On Washable and Reusable Air Filter
    • Malleable Flanges
    • One Year Limited Warranty
  • K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Mitsubishi Raider V - 6 Cyl 3.7L 226

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine CID
2008 - Mitsubishi Lancer L 1998 4B11 4 Cyl 2.0L 122

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2008 - Mitsubishi Galant L 2378 4 Cyl 2.4L DE -

K&N
  • Replacement Air Filter
  • Panel; H-1.063 in.; L-13.438 in.; W-6.625 in.
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Width: 6.625 In.
    • Item Weight: 1.000 Lbs. (0.5 Kg)
    • Machine Washable: Yes
    • Product Box Height: 17.190 In. (437mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: Oem
    • Product Box Width: 1.750 In. (44 Mm)
    • Product Box Length: 8.310 In. (211mm)
    • Outside Diameter: Oem
    • Item Height: 1.063 In. (27mm)
    • Prop 65 (C, R or CR): Cr
    • Package Content: 1
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Outside Width: 6.625 In. (168mm)
    • Package Contents: 1 Air Filter
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • Overall Length: N/a
    • Package Quantity: 1
    • Shape: Panel
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.3 Oz (39 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Outside Length: 13.438 In. (341mm)
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
13721736675, 2820175, 46077, 53004383AB, 6077, 88077, A1166C, A1331, A24372, AF4372, AF7877, BA4372, C26151, CA3901, DW88077, HPR3901, MA4372, MGA46077...VIEW MORE

Additional Fitment Information:
Vehicle
2008 - Mitsubishi Raider

Magnaflow
  • Single Straight Passenger Side Rear Exit
  • Street Series Stainless Cat-Back System
  • Street Series Stainless Cat-Back System
  • Product Attributes:
    • Muffler Type: Straight-through
    • Tip Finish: Polished
    • Exit Style: Single Straight Passenger Side Rear
    • Tip Length: 7.25
    • Tip Type: Welded;double Wall;angle Cut;rolled Edge;resonated
    • Muffler Quantity: 2
    • Subtitle: Cat-back
    • Main Piping Diameter: 2.5
    • Tip Diameter: 4
    • Muffler Finish: Satin
    • Tip Shape: Round
    • Inlet Connection Type: Clamp-on

Additional Fitment Information:
Vehicle Block CC Engine Aspiration CID
2008 - Mitsubishi Lancer L 1998 4 Cyl 2.0L Naturally Aspirated 122

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2008 - Mitsubishi Eclipse V 3828 6 Cyl 3.8L Spyder GT-P 230
Showing 1 - 10 of 4797 products

Loading...