1991 Ignition Coil Parts

Choose a Make for your 1991 vehicle

Showing 1 - 10 of 171 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1991 Dodge D150 Ignition Coil 6 Cyl 3.9L Accel

Primary Resist 1.0 Ohms; Secondary 12.7 k Ohms; Turn Ratio 76:1; Max Voltage 42000V; Yellow;Legal For Non-Emissions Controlled Vehicles Or For Race Use
SuperCoil Ignition Coil; Primary Resist 1.0 Ohms; Secondary 12.7 k Ohms; Turn Ratio 76:1; Max Voltage 42000V; Yellow;
SuperCoil Ignition Coil
Product Attributes:
- Peak Increase in Dwell: 36%
- Peak Increase in Current: 17%
- WARNING CA Proposition 65: Yes
- Turns Ratio: 76:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Peak Increase in Arc Duration: 23%
- Maximum Voltage: 42000
- Primary Resistance: 1.000 Ohms
- Package Quantity: 1
- Secondary Resistance: 12.7k Ohms
Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Uf-198
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Dodge D150	V	3906	6 Cyl 3.9L	239

6 In Stock

$110.10 CAD

$132.12 CAD

Brand	Accel
Part #	A35140021
Condition	New
Warehouse	B

1991 Toyota Pickup Ignition Coil 4 Cyl 2.4L Accel

Primary Resist 1.4 Ohms; Secondary 9.2 k Ohms; Turn Ratio 94:1; Max Voltage 42000V; Yellow
Super Stock Universal Performance Coil; Primary Resist 1.4 Ohms; Secondary 9.2 k Ohms; Up To 6500RPM; Turn Ratio 94:1; Max Voltage 42000V; Yellow;
Super Stock Universal Performance Coil
Product Attributes:
- WARNING CA Proposition 65: No
- Turns Ratio: 94:1
- Maximum Voltage: 42000
- Primary Resistance: 1.400 Ohms
- Package Quantity: 1
- Secondary Resistance: 9.2k Ohms
Features:
- 42000 Volts
- Effective To 6500 RPM
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1991 - Toyota Pickup	L	2366	4 Cyl 2.4L	DLX	-

25 In Stock

$66.70 CAD

$80.04 CAD

Brand	Accel
Part #	A358140
Condition	New
Warehouse	B

1991 Dodge D250 Ignition Coil 6 Cyl 3.9L MSD

Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;CARB E.O. D-40-37
Blaster Ignition Coil; Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;
Blaster Ignition Coil
Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 3.9 Mh
- Peak Current: N/a
- Secondary Resistance: 13.7k Ohms
Features:
- Direct performance replacement for late model Dodge vehicles
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Bolt-on more output voltage to your late model Chrysler/Dodge ignition. The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring with an MSD Ignition, use the Universal Harness, PN 8873.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Dodge D250	V	3906	6 Cyl 3.9L	239

12 In Stock

$112.47 CAD

$134.96 CAD

Brand	MSD
Part #	M468228
Condition	New
Warehouse	B

1991 Cadillac Commercial Chassis Ignition Coil 8 Cyl 4.9L MSD

3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;CARB E.O. D-40-37 Recommend To Use w/HEAT HEI Module PN[83647]
GM HEI Distributor Coil; 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;
GM HEI Distributor Coil
Product Attributes:
- Spark Duration: 200 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 3.5 Mh
- Maximum Voltage: 42000
- Peak Current: 200 Ma
- Primary Resistance: .310 Ohms
- Secondary Resistance: 9.2k Ohms
Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
- Recommended For Use w/MSD HEI Module PN[83647]
- CARB E.O. Approved
HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module, PN 83647.The MSD HEI Coil is designed for use with the MSD High Output HEI Module, PN 8364. It will work with stock ignition modules, but for maximum output use the MSD HEI Module.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Cadillac Commercial Chassis	V	-	8 Cyl 4.9L	300

7 In Stock

$183.97 CAD

$220.76 CAD

Brand	MSD
Part #	M468225
Condition	New
Warehouse	B

1991 Chevrolet Beretta Ignition Coil 6 Cyl 3.1L MSD

Street Fire™ GM Dual Connector Ignition Coil
Direct Replacement; Red/Black;OEM Replacement
Street Fire™ GM Dual Connector Ignition Coil; Direct Replacement; Red/Black;
Street Fire(TM) GM Dual Connector Ignition Coil
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec'd by MSD engineering.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Chevrolet Beretta	V	-	6 Cyl 3.1L	189

25 In Stock

$97.28 CAD

$116.74 CAD

Brand	MSD
Part #	M465526
Condition	New
Warehouse	B

1991 Jeep Wrangler Ignition Coil Crown Automotive

Ignition Coil;
Ignition Coil
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Ignition Coil
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
1991 - Jeep Wrangler

2 In Stock

$39.02 CAD

$46.82 CAD

Brand	Crown Automotive
Part #	C1Y4797293
Condition	New
Warehouse	B

1991 Plymouth Acclaim Ignition Coil 4 Cyl 2.5L MSD

Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;CARB E.O. D-40-37
Blaster Ignition Coil; Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;
Blaster Ignition Coil
Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 3.9 Mh
- Peak Current: N/a
- Secondary Resistance: 13.7k Ohms
Features:
- Direct performance replacement for late model Dodge vehicles
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Bolt-on more output voltage to your late model Chrysler/Dodge ignition. The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring with an MSD Ignition, use the Universal Harness, PN 8873.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1991 - Plymouth Acclaim	L	2507	4 Cyl 2.5L	Base	153

12 In Stock

$112.47 CAD

$134.96 CAD

Brand	MSD
Part #	M468228
Condition	New
Warehouse	B

1991 Cadillac Brougham Ignition Coil 8 Cyl 5.7L MSD

Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;CARB E.O. D-40-37 0.68 ohms Primary Resistance/4.8k ohms Secondary Resistance~GM Dual Connector Coil Use PN[8876] Harness For Direct Plug-in
GM Dual Connection Ignition Coil; Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;
GM Dual Connection Ignition Coil
Product Attributes:
- Spark Duration: 300 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 5.6 Mh
- Maximum Voltage: 44000
- Peak Current: 220 Ma
- Primary Resistance: .680 Ohms
- Secondary Resistance: 4.8k Ohms
Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, install an MSD Ignition Control with a PN 8876 Harness for a direct plug-in installation.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Cadillac Brougham	V	-	8 Cyl 5.7L	350

6 In Stock

$115.28 CAD

$138.34 CAD

Brand	MSD
Part #	M468226
Condition	New
Warehouse	B

1991 Toyota 4Runner Ignition Coil 4 Cyl 2.4L Mallory

Canister Style; 12 Volt; For Unilite And MBI Distributors And Conversion Kits; Chrome; Red Top;Legal for Racing Use Only Not Recommended For Use w/Mallory HyFire systems
Street Performance Ignition Coil; Canister Style; 12 Volt; For Unilite And MBI Distributors And Conversion Kits; Chrome; Red Top;
Street Performance Ignition Coil
Product Attributes:
- Spark Duration: 3.4 Ms
- WARNING CA Proposition 65: Yes
- Turns Ratio: 104:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 6.8 Mh
- Maximum Voltage: 40000
- Peak Current: 54 Ma
- Primary Resistance: 1.360 Ohms
- Secondary Resistance: 10.87k Ohms
Features:
- Maximum Voltage 58000 Volts
- Fits In Most Stock Brackets
- Alkyd tower w/high dielectric prop. less prone to carbon tracking
- 100:1 Turns Ratio/Lower Primary Resistance Produce High Voltage
- Metal Canister Is Filled With A Premium Grade Oil For Cooling
Universal Street Performance Chrome Ignition Coil For UNILITE, Magnetic Breakerless (MBI) Distributors, And Conversion Kits

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1991 - Toyota 4Runner	L	2366	4 Cyl 2.4L	-

Brand	Mallory
Part #	M1129219
Condition	New
Warehouse	B

1991 Plymouth Colt Ignition Coil 4 Cyl 1.5L Mallory

Canister Style; 12 Volt; For Unilite And MBI Distributors And Conversion Kits; Chrome; Red Top;Legal for Racing Use Only Not Recommended For Use w/Mallory HyFire systems
Street Performance Ignition Coil; Canister Style; 12 Volt; For Unilite And MBI Distributors And Conversion Kits; Chrome; Red Top;
Street Performance Ignition Coil
Product Attributes:
- Spark Duration: 3.4 Ms
- WARNING CA Proposition 65: Yes
- Turns Ratio: 104:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inductance: 6.8 Mh
- Maximum Voltage: 40000
- Peak Current: 54 Ma
- Primary Resistance: 1.360 Ohms
- Secondary Resistance: 10.87k Ohms
Features:
- Maximum Voltage 58000 Volts
- Fits In Most Stock Brackets
- Alkyd tower w/high dielectric prop. less prone to carbon tracking
- 100:1 Turns Ratio/Lower Primary Resistance Produce High Voltage
- Metal Canister Is Filled With A Premium Grade Oil For Cooling
Universal Street Performance Chrome Ignition Coil For UNILITE, Magnetic Breakerless (MBI) Distributors, And Conversion Kits