Shop By Product Matching "Thermo-Tec 14005"

Choose a Year for your vehicle

Showing 1 - 10 of 1274 products

Sort:

Show:

Image

SKU

Product

Rating

Price

Exhaust Heat Shield Thermo-Tec

Universal

Thermo Sleeve
Thermo Sleeve; 1/4 in. - 1/2 in. Inside Dia.; 3 ft. Length; Outside Diameter 7/16 in.;
Product Attributes:
- Inside Diameter: 0.250 In.
- Size: 0.250 In.
- Product Length: 3 Ft.
Features:
- Protects Hoses And Wires From Radiant Heat
- Reflects More Than 90 Percent Of Radiant Heat
- Fireproof
- Oil Resistant
- Light Weight Construction
The new lamination of a high-temperature fabric to a highly-reflective foil is the makeup of Thermo-Sleeve, which provides protection from radiant heat for hoses and wires.Thermo-Sleeves ultra light-weight construction provides more insulating than traditional bulky rubber-coated fiberglass. The aluminized sleeving reflects over 90-percent of radiant heat, and is fireproof and oil resistant. The Thermo-Sleeve can handle conductive heat temperatures of 750-deg F and radiant heat temperatures up to 2000deg F.Thermo-Sleeve is packaged in 3 or 12-foot lengths, and is sold in five different inside diameter sizes. Thermo-Sleeve is available in custom lengths for special applications. Typical applications include brake, fuel,oil and a/c lines.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

19 In Stock

$29.09 CAD

$34.91 CAD

Brand	Thermo-Tec
Part #	T1914005
Condition	New
Warehouse	B

2020 Chevrolet Silverado 3500 HD Trailer Hitch - Rear 8 Cyl 6.6L CURT

Class 4 Trailer Hitch; 2in. Receiver; Select Silverado; Sierra 2500; 3500 HD
Gloss Black Powder Coat Excluding Factory Receiver
CURT 14005 Class 4 Trailer Hitch; 2-Inch Receiver; Fits Select Chevrolet Silverado; GMC Sierra 2500; 3500 HD
Class IV 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 10000 Lbs.
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1200
- WC Tongue Weight: 1000
- Weight Distribution: 12000
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever the next item is on your to-do list -- whether it's arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado and GMC Sierra 2500 HD and 3500 HD (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2 in. receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid Bonderite and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2020 - Chevrolet Silverado 3500 HD	V	6571	Rear	8 Cyl 6.6L	LT	401

3 In Stock

$649.68 CAD

$779.62 CAD

Brand	CURT
Part #	14005
Condition	New
Warehouse	C

2020 GMC Sierra 2500 HD Trailer Hitch - Rear 8 Cyl 6.6L CURT

Class 4 Trailer Hitch; 2in. Receiver; Select Silverado; Sierra 2500; 3500 HD
Gloss Black Powder Coat For Models w/o Factory Receiver~Excluding Factory Receiver
CURT 14005 Class 4 Trailer Hitch; 2-Inch Receiver; Fits Select Chevrolet Silverado; GMC Sierra 2500; 3500 HD
Class IV 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 10000 Lbs.
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1200
- WC Tongue Weight: 1000
- Weight Distribution: 12000
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever the next item is on your to-do list -- whether it's arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado and GMC Sierra 2500 HD and 3500 HD (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2 in. receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid Bonderite and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2020 - GMC Sierra 2500 HD	V	6571	Rear	8 Cyl 6.6L	401

3 In Stock

$649.68 CAD

$779.62 CAD

Brand	CURT
Part #	14005
Condition	New
Warehouse	C

2024 Chevrolet Silverado 2500 HD Trailer Hitch - Rear 8 Cyl 6.6L CURT

Class 4 Trailer Hitch; 2in. Receiver; Select Silverado; Sierra 2500; 3500 HD
Gloss Black Powder Coat For Models w/o Factory Receiver
CURT 14005 Class 4 Trailer Hitch; 2-Inch Receiver; Fits Select Chevrolet Silverado; GMC Sierra 2500; 3500 HD
Class IV 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 10000 Lbs.
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1200
- WC Tongue Weight: 1000
- Weight Distribution: 12000
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever the next item is on your to-do list -- whether it's arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado and GMC Sierra 2500 HD and 3500 HD (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2 in. receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid Bonderite and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2024 - Chevrolet Silverado 2500 HD	V	6599	Rear	8 Cyl 6.6L	403

3 In Stock

$649.68 CAD

$779.62 CAD

Brand	CURT
Part #	14005
Condition	New
Warehouse	C

Winch Controller Mile Marker

Universal

Winch Remote Control
Winch Remote Control; with Toggle Switch; For Use w/B/SI Winch;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Designed For Electric Winches w/Standard Solenoids
- Remote Control Wire End Female/Connects To 3 Pin Male Connector
- Feature 12 Foot Cord
- Integrated Joystick Allow Precise Control Of Winch Speed
- 2 Year Manufacturer Warranty
For SEC8, SI and Legacy models with 3 prong.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

153 In Stock

$61.80 CAD

$74.16 CAD

Brand	Mile Marker
Part #	M2076-50140-05B
Condition	New
Warehouse	B

2017 GMC Canyon Step Nerf Bar Westin

Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab Textured Black~Rocker Panel Mount
HDX Drop Nerf Step Bars; Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab;
HDX Drop Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Modular
Features:
- Die Stamped Stainless Steel Step Areas For Maximum Traction
- Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
- Removable Step Plates For Easy Cleaning
- Fits Tight To Rocker Panel For Solid Fit And Rugged Look
- Solid 1-Piece Construction
- Bolt-On Installation No Drilling Required For Most Applications
- Mount Kit Included
- 3 Year Warranty
Westins HDX Drop Nerf Step Bars provide the rugged look and function that truck owners need and want. They feature a solid 1-piece steel construction and heavy duty punch plates creating high traction step areas. The HDX Drop Nerf Step Bars also feature Westins notched bar design which provides more than 2 in. of additional toe/heel placement versus competitive brands. Available in a textured black finish that complements Westin HDX Bumpers. The HDX Drop Steps have vehicle specific applications and include a vehicle specific mount kit, installation hardware and instructions.

Additional Fitment Information:

Vehicle	Sub Model	Body
2017 - GMC Canyon	Base	Extended Cab Pickup

4 In Stock

$783.55 CAD

$940.26 CAD

Brand	Westin
Part #	W1656-14005
Condition	New
Warehouse	B

2015 Chevrolet Colorado Step Nerf Bar Westin

Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab Textured Black~Rocker Panel Mount
HDX Stainless Drop Nerf Step Bars; Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab;
HDX Stainless Drop Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Square
Features:
- Corrosion Resistant Black Powder-Coated Stainless Steel
- Die Stamped Stainless Steel Step Areas For Maximum Traction
- Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
- Features A Notched Bar Design With Heavy-Duty Step Plate
- Includes Rust Resistant Stainless Steel Step Plates
- Removable Step Plates For Easy Cleaning
- Fits Tight To Rocker Panel
- Solid 1-Piece Construction
- Bolt-On Installation No Drilling Required For Most Applications
- Mount Kit Included
- Lifetime Warranty
Westin's HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle's rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Additional Fitment Information:

Vehicle	Sub Model	Body
2015 - Chevrolet Colorado	LT	Extended Cab Pickup

11 In Stock

$1,065.36 CAD

$1,278.43 CAD

Brand	Westin
Part #	W1656-140052
Condition	New
Warehouse	B

2015 GMC Canyon Step Nerf Bar 6 Cyl 3.6L Westin

Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab
HDX Drop Nerf Step Bars; Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab;
HDX Drop Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Modular
Features:
- Die Stamped Stainless Steel Step Areas For Maximum Traction
- Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
- Removable Step Plates For Easy Cleaning
- Fits Tight To Rocker Panel For Solid Fit And Rugged Look
- Solid 1-Piece Construction
- Bolt-On Installation No Drilling Required For Most Applications
- Mount Kit Included
- 3 Year Warranty
Westins HDX Drop Nerf Step Bars provide the rugged look and function that truck owners need and want. They feature a solid 1-piece steel construction and heavy duty punch plates creating high traction step areas. The HDX Drop Nerf Step Bars also feature Westins notched bar design which provides more than 2 in. of additional toe/heel placement versus competitive brands. Available in a textured black finish that complements Westin HDX Bumpers. The HDX Drop Steps have vehicle specific applications and include a vehicle specific mount kit, installation hardware and instructions.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2015 - GMC Canyon	V	3564	6 Cyl 3.6L	SLE	Extended Cab Pickup	217

4 In Stock

$731.31 CAD

$877.57 CAD

Brand	Westin
Part #	W1656-14005
Condition	New
Warehouse	B

2015 Chevrolet Colorado Step Nerf Bar 4 Cyl 2.5L Westin

Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab
HDX Stainless Drop Nerf Step Bars; Textured Black Powder Coated Steel; Mount Kit Included; For Double Cab;
HDX Stainless Drop Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Square
Features:
- Corrosion Resistant Black Powder-Coated Stainless Steel
- Die Stamped Stainless Steel Step Areas For Maximum Traction
- Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
- Features A Notched Bar Design With Heavy-Duty Step Plate
- Includes Rust Resistant Stainless Steel Step Plates
- Removable Step Plates For Easy Cleaning
- Fits Tight To Rocker Panel
- Solid 1-Piece Construction
- Bolt-On Installation No Drilling Required For Most Applications
- Mount Kit Included
- Lifetime Warranty
Westin's HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle's rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2015 - Chevrolet Colorado	L	2457	4 Cyl 2.5L	WT	Extended Cab Pickup	153

11 In Stock

$996.62 CAD

$1,195.94 CAD

Brand	Westin
Part #	W1656-140052
Condition	New
Warehouse	B

2000 Ford F-250 Super Duty Engine Control Module (ECM) PROM 8 Cyl 7.3L Edge

Master Box Code NVK4; 6 Performance Programs; Supports PCM Codes AGD/BKA/CNH/FIF/HAM/JLJ/KRK/LVS/MNM/MRT/NVK/PMT/RXM/YEV;CARB E.O. D-541-18 Level 1: Stock~Level 2: High Idle~Level 3: HP Increase +50 HP And Torque Increase +100 lbs./ft.~Level 4: HP Increase +75 HP And Torque Increase +150 lbs./ft.~Level 5: HP Increase +100 HP And Torque Increase +200 lbs./ft.~Level 6: HP Increase +140 HP And Torque Increase +350 lbs./ft.
Revolver Performance Chip/Switch; Master Box Code NVK4; 6 Performance Programs; Supports PCM Codes AGD/BKA/CNH/FIF/HAM/JLJ/KRK/LVS/MNM/MRT/NVK/PMT/RXM/YEV;
Revolver Performance Chip/Switch
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Can Make Up To 150 HP
- Up To Six Switchable Performance Programs
- Switch On The Fly
REVOLVER PERFORMANCE CHIP/SWITCH FORD 7.3L 99.5-01 Auto 6-Chip Master Box Code NVK4.The new Edge Revolver Performance Chip is designed for 95-03 Ford 7.3L Power Stroke diesels and can make up to 150 HP (Depending on Model Year) with up to 6 performance programs switchable on the fly using the included switch! Edge Part number 14005 is designed for build date 1998 Ford 7.3L Power Stroke with an Auto transmission. The Master PCM Code for the 14005 is NVK4. This Master PCM code supports the following PCM codes AGD, BKA, CNH, FIF, HAM, JLJ, KRK, LVS, MNM, MRT, NVK, PMT, RXM, and YEV.