Vehicle
Vehicle
The Largest Auto Parts Store in Canada
About us
Feedback
Retrieve Quote
usa ca
Menu
Feedback Retrieve Quote
Account 0 Cart Garage
CA
Select a vehicle to find exact fit parts
Back to vehicles list
Hello, Log In My Account
0 Shopping Cart $0.00

2003 GMC Yukon XL 2500 Serpentine Belt - Main Drive 8 Cyl 8.1L Dayco

4 on 258 ratings
This Part Fits the Following OEM/Substitute Numbers:
06004122, 06E.903.137A, 06E.903.137J, 10229101, 12550111, 12557719, 12564761, 12569350, 12569434, 12576453, 12576747, 12636138, 12636139, 12637200, 146-062415, 25-060950, 25-060952, 25-76095, 395464985, 4060950, 53010314, 5590344, 6K950, 6K952, 6PK2415, 90TA-8620-AA, 950K6, 952K6, F2UA-8620-CA, F2UA-8620-XA, F2UZ-8260-L, F2UZ-8620-B, F2UZ-8620-L, F4UA-8620-ALA, F5TA-8620-UA, JK6-955B, K060950, K060952, PK060950, R246656, R515218

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2003 GMC Yukon XL 2500 V - Main Drive 8 Cyl 8.1L 496
1 In Stock
Best Price:

$48.17 CAD
$57.80 CAD
Brand Dayco
Part # D355060950
Condition New
Warehouse B
Dayco

Yukon XL 2500 Dayco Serpentine Belt 5060950 2003 GMC
  • w/105 Amp Alt., w/A.C.
    • Dayco is an industry and global leader in auto parts manufacturing industry and has been in the business since 1905, 100 years! Dayco makes replacement auto parts for the automotive aftermarket that keep vehicles moving, including belts, automatic belt tensioners, hoses, pulleys, timing products and more. Dayco goes to be the first to market on these parts by providing innovative, quality products.
    Some of Dayco's most popular products are their custom fit, molded radiator hoses and heater hoses, their great array of premium belts, including the poly ribbed belts, v-ribbed belts, standard setting v-belts, and timing belts, as well as the ever popular timing belt kits that include all the parts needed to do a complete timing job on your vehicle's engine.

    Dayco is an industry and global leader in auto parts manufacturing industry and has been in the business since 1905, 100 years! Dayco makes replacement auto parts for the automotive aftermarket that keep vehicles moving, including belts, automatic belt tensioners, hoses, pulleys, timing products and more. Dayco goes to be the first to market on these parts by providing innovative, quality products.
    Some of Dayco's most popular products are their custom fit, molded radiator hoses and heater hoses, their great array of premium belts, including the poly ribbed belts, v-ribbed belts, standard setting v-belts, and timing belts, as well as the ever popular timing belt kits that include all the parts needed to do a complete timing job on your vehicle's engine.

    General

    Cross Section
    K-section
    Top Width
    .82
    Rib Profile
    Straight Rib
    Outside Circumference
    • 2429.26
    • 95.64
    Rib Depth
    Standard
    Standards
    Sae J1459, Sae J2432
    Effective Length
    • 2415.04
    • 95.08
    Minimum Operating Temperature
    • -42.7
    • -45
    381
    6
    Maximum Operating Temperature
    • 100
    • 212

    Packaging

    package quantity
    1
    length
    14.57 in
    width
    4.00 in
    height
    0.84 in
    weight
    0.65 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Robert Huard
      30 Jan, 2024
    2. 31 Dec, 2018
      Good quality and made for a easy replacement
    3. 25 Feb, 2018
      Good quality product. Very quiet belt. Easy to install.
    4. james kincaid
      05 May, 2015
      good quality. would buy again
    5. ShawnXB12
      28 Apr, 2015
      Perfect fit for my 2004 Nissan Sentra 1.8L SE.
    6. J. Groce
      22 Apr, 2015
      Bougfht this for a C2500 chevy truck 1995. Fit great and was cheaper than the local shops.
    7. Alfonso S.
      05 Apr, 2015
      Very good
    8. R. Villegas
      28 Mar, 2015
      This is a great automotive serpentine belt that fits perfectly in a 1998 Ford Explorer V6 (X) engine. This Dayco belt is made in the good olde USA whereas the Gates belt it replaced was made in Mexico. This is a ribbed belt and the past two belts have shown severe signs of wear and tear after two years of normal use. I will see how long this belt wears on but for now it looks and feels great. AutoPartsWAY provides great value and service coupled with FREE shipping arriving at my door safe and secure. Beats going to the auto parts store any day, have a great day!
    9. al brown
      27 Mar, 2015
      Fit perfect and was in excellent condition as advertised thanks and RTR
    10. whipper "whipper"
      22 Mar, 2015
      2012 Subaru Impreza replacement. 60,000 mile service, easy diy job. Good fit, good brand, good price.
    11. Robert
      21 Mar, 2015
      Good deal. Fast delivery thanks
    12. LancerL0t
      20 Mar, 2015
      Having to re-tightening the belts is not a reason to give it such a low rating son... you might wanna goto a mechanic next time.... I seen so many wanna-bee's .. with same issue here... I for one had no issue using these belts.. works perfect with my 2003 lancer
    13. Jesse E
      18 Mar, 2015
      Fit's 2003 Nissan Frontier w/supercharger
    14. Jay Munoz
      15 Mar, 2015
      works great
    15. Lars Slate
      12 Mar, 2015
      Looks Good
    16. Ronald J. Dyer "SuperTeach"
      05 Mar, 2015
      Both alternator and belt arrived in a timely manner. They were perfect fits for my car. I recommend this vendor.
    17. hector coronel
      04 Mar, 2015
      Fit perfectly
    18. A Guy
      01 Mar, 2015
      Perfect fit on my 2006 F250 6.0L Diesel with dual alternators. This belt is for the primary sheave that powers most of the engine accessories.
    19. Belizaire
      27 Feb, 2015
      Brilliant fit
    20. Fahad Choudhary "fahad242"
      26 Feb, 2015
      dayco makes good belt at a decent price.
    21. GM.A.Tech
      26 Feb, 2015
      good price good shipping time good product
    22. stusta
      22 Feb, 2015
      Perfect fit. Great price.
    23. Cowboy 88
      21 Feb, 2015
      High quality belt. It's exactly the same brand, size and part number as sold by Autozone, but cheaper. If you are lucky, you don't even have to pay sale taxes. Just be sure to double check part number with Autozone or other retailer to make sure it fit your car since AutoPartsWAY's cross references sometimes can be flaky.
    24. Nicholas Burns
      19 Feb, 2015
      Great quality belt made in the USA and fit perfectly for 2003 Ford Explorer Limited 4.6L.
    25. Stoner
      18 Feb, 2015
      Nice product.
    26. mike884
      18 Feb, 2015
      Needed to replace a belt on a 2008 Hyundai Sante Fe 2.7L and this fit the bill. The price is right and quality is good. Always had good experiences with dayco belts.
    27. D. Cupka
      14 Feb, 2015
      it fits.
    28. Teacher
      11 Feb, 2015
      Good price and fit perfectly.
    29. Vinny
      01 Feb, 2015
      Perfect belt for my 2008 LR2 Inline 6 engine.
    30. packit
      27 Jan, 2015
      fair price
    31. 907Swagger
      26 Jan, 2015
      I went on the actual "Dayco" website for a good fit. It is different from the AutoPartsWAY recommendation.Easy to install on my 95 explorer
    32. mike decker
      25 Jan, 2015
      great price,great product
    33. Stephen Craig
      13 Jan, 2015
      Fit my 1998 Dodge Ram Sport 4x4 5.9l perfectly. Nice and quiet now. AutoPartsWAY price was about $15 cheaper than local auto stores.
    34. greg
      11 Jan, 2015
      Works as it should
    35. Bob Sandefur
      10 Jan, 2015
      Great product...Great price...Fast shipping.
    36. Alexei
      07 Jan, 2015
      Fits right in to toyota camry 99 4 cyl engine. Seats well on the pulleys. It took me a few minutes to install it.
    37. David Berry "dberry1052"
      03 Jan, 2015
      well made perfect fitment
    38. Upper Michigan user "Joygear"
      16 Dec, 2014
      Perfect. Shipped quickly.
    39. K. Smith "CakeLady"
      14 Dec, 2014
      Good belt for Matrix XR, does not fit my XRS.
    40. Chris
      14 Dec, 2014
      Was a little hard to find the non-ps non-ac belt on AutoPartsWAY. I was really hoping to find it from gates or Goodyear but this looks like it will hold up well. Time will tell going forward but the price is right and the fit is correct.
    41. Alex
      12 Dec, 2014
      Worked well on my 2000 Ford ranger 2.5l, no tools needed other than an open ended wrench.
    42. edgexsnoglobe
      08 Dec, 2014
      Fits great
    43. raz744u
      07 Dec, 2014
      This is not the high quality Dayco. It has only 1 year warranty. It will work, just a lower quality belt.
    44. AutoPartsWAY Customer
      05 Dec, 2014
      Just what i needed and fast on delivery
    45. Steven DeRocher
      05 Dec, 2014
      exactly what I wanted when I ordered
    46. Luis
      03 Dec, 2014
      no picture, no problem... excellent fit !!!
    47. Ron Meinhardt
      30 Nov, 2014
      Arrived as expected. Good quality belt, would buy again.
    48. JP
      16 Nov, 2014
      no more squeaks!
    49. Jerry D. Jones
      16 Nov, 2014
      The right belt shipped and received on time! Great price as well.
    50. Bubba
      11 Nov, 2014
      good fit
    51. TheGoodBuyer
      10 Nov, 2014
      I received a Dayco Gold Label-Diesel Grade Design belt. The generic sizing is 8PK2415. The belt looks well made and installed without issue, after remembering to slide the skid plate to the side to remove it on a Tundra. The belt threaded on without issue. There is a diagram of the belt routing with the belt packaging though it's easier to pay attention to the original belt routing as you take it off.Some people elsewhere mentioned some belt squeal. I haven't heard a single chirp, even on startup, with no belt dressing used. The belt has been quiet. Would buy again.
    52. R. Lashley
      27 Oct, 2014
      This belt fits the 2001 TOYOTA RAV4 2.0 ( 1AZ ) Engine real good.I have been using different brands of belts, all types for the past 28 Years and I have to say DAYCO is the best Brand Belt there is, NO I DON'T WORK WITH DAYCO, LOL :)RALT&T
    53. Cville MTBer
      26 Oct, 2014
      Installed this today on a 2007 Ford Expedition EL 5.4L. Install is straight forward. 1/2 in breaker bar on the tensioner to release the old belt and install the new one. I recommend removing the air intake between the air filter and the manifold. It only take a flat head screw driver and it comes right off. This allows you to work above the engine to thread the new belt in. I also recommend disconnecting the fan electrical connector and moving it to the side. This allows you to get a breaker bar down to the tensioner pulley.
    54. Tom O.
      24 Oct, 2014
      Just installed yesterday but it is working good so far.
    55. Mudd
      21 Oct, 2014
      Fast shipping, belt met needs
    56. GYPSY THE STEGOSAURUS "GS"
      19 Oct, 2014
      The dayco belts are top notch. They fit great and they last along time. Belts take a tremendous amount of abuse, and with todays cars, one belt does everything, water pump, alternator, power steering, air conditioning. If you lose the belt (breaks) your car is not driveable. Not even a few miles to get home or to a shop--unless its very cold outside. If its night and hot, (meaning you need to use lights and you need the water pump to cool the engine, you need to have it towed.these belts fit properly and are nice and quiet. I always change my belts every 2 years, 24000 miles, its cheap insurance. Then I keep the last one (i removed) in the trunk with the spare tire. You should practice changing your belt and keep the proper tool in the car. Usually its a 1/2 socket driver or breaker bar. You take the tension off the belt by prying the tensioner back and then you remove the belt. You put it on the opposite of how it comes off, (usually a diagram stuck to the...
    57. Peter Prasad
      13 Oct, 2014
      looks like a good fit and quality, have not applied it yet
    58. AutoPartsWAY Customer "Chelle'"
      13 Oct, 2014
      Perfect fit for my BMW Z3 Roadster
    59. tom4416 "bookie monster"
      05 Oct, 2014
      Hey, it's a belt and it fits the car it was intended for. Pricing was the sole determinant of purchasing it through AutoPartsWAY and my two day Prime delivery was just a bonus.
    60. Abdulkareem Hassan
      28 Sep, 2014
      Fantastic. Well made and fits my E90 330i perfectly. Even better that the stock in my opinion.
    61. Ariel
      27 Sep, 2014
      Perfect fit on my 07 Lexus is350!
    62. Matt T
      24 Sep, 2014
      Dayco makes good belts. I have always had a problem getting alternator/ac belts on my 94 and 95 preludes... So I always get one that is 1/2" longer than what it says in the autoparts computer and it goes on and works just as it should. Powers my alternator and AC compressor.
    63. Ramon Figueroa
      24 Sep, 2014
      well worth the purchase.
    64. Samuel
      14 Sep, 2014
      I used this belt after the manufacturer recommended belt for my grandfathers '98 Dodge Dakota ended up being a couple inches too short. His A/C unit was going out and he just wanted to bypass the whole thing instead of replacing the unit. This belt was referenced in a youtube video of someone doing the same thing. The belt fit perfectly and arrived on time. The only thing is that the belt we got did not have the cross-way grooves that were visible in the picture.
    65. Exodus
      10 Sep, 2014
      Installation was spot on, length was spot on, belt feels good quality and is very quiet. would recommend
    66. Robert M
      10 Sep, 2014
      Seems to have eliminated a squeal on cold starts I was experiencing on my Avalon. I would use for older cars that could have slop in the drive line.
    67. SR
      06 Sep, 2014
      Works great. Replacement for a 25 year old Corvette.
    68. Gman
      06 Sep, 2014
      seemed to work just fine and made of good quality material
    69. C. Mcgovern "CM"
      03 Sep, 2014
      I have a 2005 Pontiac Grand Prix GT, 3.8L engine. This fit great.
    70. Mac MacPherson
      28 Aug, 2014
      spot on just the job no problem fitting it all went well very pleased as I could not buy one from the UK although the car is Britishthanks regards Mac
    71. Boxcar
      28 Aug, 2014
      This belt is for the A/C compressor, it is NOT the accessory drive belt for the alternator, power steering and water pump. It fits perfectly if installed correctly. To install you must slide it behind the crankshaft pulley and then install it on the compressor and tensioner and after compressing the tensioner you can then get in onto the crankshaft pulley. You must remove the accessory drive belt to replace this. You will need an 15 mm wrench for the accessory drive belt tensioner and a 3/8 ratchet for the A/C belt tensioner and you will also have to remove the plastic front splash shield, 15 mm bolts, and work from the bottom to replace the A/C belt.
    72. Bloose
      25 Aug, 2014
      Perfect fit on my sons '83 Mustang with the V6 and AC. It's been on all summer and has been working well. It runs quietly and we've had no issues at all with it to this point.
    73. Raymond Norton
      18 Aug, 2014
      Very sturdy belt, handles heavy loads. Including high amp alternators.
    74. Dan Price "desert dan"
      17 Aug, 2014
      I have been sold on Dayco Belts and Hoses for 30 or more years. "Top Cog" Dayco belts were on my truck nearly 20 years! The quiet design serpentine belts are great. If I ever move back to snow country Dayco snowmobile belts will be my choice also.
    75. Marilyn Schultz
      14 Aug, 2014
      Good prices
    76. Ed Duce
      12 Aug, 2014
      Good choice and fits perfectly on a 2000 SAAB V6.
    77. Tom
      07 Aug, 2014
      It fit my Crown Vic no problem.
    78. Pro-ecotime
      01 Aug, 2014
      replaced old belt - works and fits fine !
    79. Rafael M.
      29 Jul, 2014
      Installed along with new compressor, working without glitches. Thanks for the great savings AutoPartsWAY!
    80. AT9568
      27 Jul, 2014
      I personally haven't noticed the squealing. It's been on my car for over a week now and seems to be doing its job on my 97 Chevy Tahoe. Seems to be a great product at a great price.
    81. samuel
      26 Jul, 2014
      It great
    82. mrjj
      22 Jul, 2014
      fit good
    83. Gene Lair
      22 Jul, 2014
      just what I wanted
    84. Jodi Cleveland
      20 Jul, 2014
      work great easy to put on! perfect fit on my 99 dodge dakota! without A/C!
    85. RICHARD W MULLINS
      19 Jul, 2014
      What can I say. It's a Belt. It fits great.
    86. Big John
      16 Jul, 2014
      It's a belt. Went on easy and seems to be doing it's job.
    87. DeEntre
      13 Jul, 2014
      Good belt
    88. donald floyd willingham, sr.
      11 Jul, 2014
      great
    89. Gregory
      11 Jul, 2014
      Good quality belt for a fair price!
    90. j
      09 Jul, 2014
      Very good belt .I came across this make of belt wile looking for other parts . Reading all positive reviews i decided to give this belts a try. impressed
    91. cfeagans
      06 Jul, 2014
      Great price on a replacement belt and it arrived very quickly because of my AutoPartsWAY Prime account, which made for planning a maintenance day on my Ford Escape very easy.
    92. shadow31071
      04 Jul, 2014
      Fit perfectly and was priced right. Will buy again if needed
    93. luis del rio
      04 Jul, 2014
      good
    94. diverdude
      03 Jul, 2014
      Once I replaced the old belt with this new one it squealed quite a bit. I tightened the new belt a few times and it continued to squeal. Finally, after about 1100 miles it has finally stopped making noise. Also, after a Google search I found that it is very common for new belts to squeal on the 4.0 Jeep engine. Gosh, that noise is horrid!!
    95. AutoPartsWAY Scott
      02 Jul, 2014
      Bought a cheaper belt first and it squealed. This belt is good quality andwas a perfect fit. Dayco is a great manufacturer.
    96. Grant
      28 Jun, 2014
      I always have good luck with Dayco belts. They seem to be heavier material than some of the other brands and seem to hold up well.
    97. P. O'Riley
      25 Jun, 2014
      The Dayco Belt came quickly and was exactly what I ordered. The Dayco belts hold up well. I should know I am a mail carrier and having spare belts and parts on hand in case of breakdown is a necessity for me.
    98. AutoPartsWAY Customer
      25 Jun, 2014
      Dayco is a name that you can trust. Never a problem with Dayco belting or hoses always good quality and right fit. Daycos web site for proper fit of the belt or hose you need.
    99. Kindle Customer
      20 Jun, 2014
      Same belt and same Dayco part number as the aftermarket part I got for my boat, just 65 dollars less.
    100. MakeItSo#1
      12 Jun, 2014
      It took under 10 minutes to replace this in my 2003 Expedition EB 5.4. Fits and works perfect. No complaints!
    101. wdt
      09 Jun, 2014
      I purchased AC Delco belts that started to squeal in a few months. After reading reviews and the construction of the Dayco belts, I decided to give it a try. Dayco Belts are working Great. I will buy Dayco in the future when needed.
    102. Jon P. Laird
      06 Jun, 2014
      Wasn't familiar with the brand, but the price was super. Delivery was very quick and the spouse quit worrying about losing the a/c during our hot Arizona summer.
    103. Big Jim Swade
      02 Jun, 2014
      I got this for my 2001 Disco without ACE. Fit perfect and was noticeably quieter that my OE LR belt that I removed.
    104. Will
      02 Jun, 2014
      I was skeptical about getting this on line but trusted the Dayco name that usually carry and produce very well made products. Fit my Charger like a charm and a little elbow grease and strength.
    105. Lee Wilson
      31 May, 2014
      high quality, as long as it is not an emergency i will always buy parts online, local parts stores screw you because they know you need it NOW. bad thing is they can't help you figure out exactly what you may need, nor do they usually care.
    106. dejan
      30 May, 2014
      great belt will last and this almost 10 cheaper than auto zone perfect fit for 2010 nissan altima 2010 would buy again and this isnt cheap rubber this is better than oem part
    107. Tom L. "Tom L."
      27 May, 2014
      It's a drive belt. A lot like any other drive belt. It is the same quality as just about every other belt and doesn't do anything out of the ordinary.
    108. T. Brown
      28 Apr, 2014
      It's hard to say that you can "love" a belt, so I'll say I like this one just fine. I prefer to spend a few extra dollars to get better quality parts, and a serpentine belt is no exception. It took me and a buddy less than a minute to take the old one off and about a minute to put the new one on after we changed out the alternator (even though I managed to pinch one of his fingers in the tensioner).
    109. ali65
      25 Apr, 2014
      Since this is the same as the original, which lasted about 110000 miles, I am hoping this one will not disappoint.
    110. Corey S.
      23 Apr, 2014
      Seems like a good quality belt. Does not squeal after installation, fits the car as expected, and survived my car's brief attempt to destroy it.
    111. MacLean Consulting
      21 Apr, 2014
      outstanding belt with a great price....I bought to replace a tired belt with a small cut in it so it worked great
    112. Binh Duc Ho
      20 Apr, 2014
      This Dayco belt # 5060436 along with # 5040333 fit perfect for my dad 2004 Nissan Sentra 1.8L engine with AC. I've been doing maintenance on my own vehicles for more than 30 years and found Dayco belts are excellent quality, made in USA is a plus indeed, along with can't be beat AutoPartsWAY price is a win win purchase.
    113. Jesse
      20 Apr, 2014
      This worked great for my 2008 Mazda5. The A/C stretch belt must be cut to get this belt on so buy that as well. For the stretch belt use the special tool from Gates but don't use the guide bolt as it won't fit the harmonic balancer pulley on the Mazda 2.3 engine.
    114. Larry
      18 Apr, 2014
      Fit right on my '97 GMC 3500 w/ the 6.5 turbo diesel. (Was a little hard to get on, since it was tighter than the old belt I removed.) Seems to be of good quality.
    115. H. F. Sawatzky
      12 Apr, 2014
      Installed on a 2005 Jeep Grand Cherokee 5.7 Hemi. Great fit and quality. Just make sure you remember how the darn thing gets routed through all the pulleys.
    116. C. Gelsinger
      25 Mar, 2014
      With everything running on one belt these days, it only makes sense to have a spare belt in the car with you. In case of a break down, you can probably find someone to install a belt, if you cannot do it yourself. Finding the replacement belt can be costly, time consuming or just impossible.
    117. Lee Baron
      15 Mar, 2014
      Exact fit great quality...Good information regarding size and fit. I would recommend this brand and site to friends and family.
    118. R. Wilson
      11 Mar, 2014
      I did have to go back a few days later, after installing the belts, 2 of them, to re-tension. This was not particularly easy to do on my front wheel drive Infiniti, so I give them 3 stars. I would consider another manufacturer next time.
    119. 1953 Woody
      09 Mar, 2014
      Bought this because it was Dayco and they seem to have a good reputation. Will review again after it's been on my van for 12 months.
    120. Todd
      08 Mar, 2014
      Quiet fot a serpentine belt. Great fit and a great price. I recommend Dayco to everyone. They make a superior product. The price js great and shipping was fast.
    121. david finley
      04 Mar, 2014
      Good fit. Looks like a good belt. I didn't have any problems installing it. Let's see how long it lasts.
    122. J. Lawrence
      04 Mar, 2014
      This belt fit well and seems to be of good quality. It's not the best belt I've seen, but for the price it should be more than fine.
    123. T. Singer "JBS"
      22 Feb, 2014
      Great product, perfect fit, quieted the car down immediately, highly recommended. Take a picture of the existing belt before you put this one on.
    124. CK in VA "Carl"
      19 Feb, 2014
      Emailed supplier about the differences in belt numbers. One indicates AC and the other does not. Great to know before you order which is supposed to go in your vehicle.Brand new belt. Shipped on time. Arrived in great shape. Great deal. Great brand. Five stars!
    125. Mitchell
      07 Feb, 2014
      Needed to replace a worn belt on my 2008 Honda Ridgeline. Did the job, would buy again. Took about 5 minutes.
    126. HBSurferMan85
      05 Feb, 2014
      Purchased this to replace my belt. My only concern was the letters on the end of the part number was not on my existing one, but after going to there website it is the same part.1994 Jeep Grand Cherokee V8 5.2
    127. Thomas Barnack
      02 Feb, 2014
      It was a good price and a good brand name, I am happy and satisfied with this purchase, Good Value....
    128. qship96
      31 Jan, 2014
      What else can you say,it does the job and after 60,000 miles of use,it still is.Better value than the dealer supplied part.
    129. AutoPartsWAY Customer
      25 Jan, 2014
      Purchased at the same time as a new water pump drive tensioner to replace the failed water pump tensioner. Installed and fits perfectly on my 2000 Mercury Cougar.
    130. Shatrupal Chavan
      24 Jan, 2014
      It's perfectly fit to my car. Got it by DHL very easy to collect and relaxing shopping. Keep up the good work
    131. Henry Bowman
      15 Jan, 2014
      I bought this to replace an old belt on a GM 5.3L GenIII V8. Installation was simple. The belt itself looked very similar to the belt that was one there and quality appears to be excellent. No odd noises have been encountered since installing this - no humming, buzzing, squeaking, whining, or chirping.
    132. Jemille R. Hardy
      13 Jan, 2014
      hey it is a good buy for this old vehicle and did not take long to install, fit perfectly and now runs smooth.
    133. Frank T Slade (in PA)
      11 Jan, 2014
      1995 Chevy K1500 5.7 164kDayco 5060955 Poly Rib fit perfectly on the truck and have run several hundred miles w/o any issue. AutoPartsWAY price over $10 less then local auto part stores. Good deal.
    134. Michael D. Smith
      10 Jan, 2014
      I have a BMW M3 and you can tell by visual inspection how much better Dayco is than Contitech. For BMW's you are limited as to the different brands that manufacture the belts. This is only for the A/C. If you want the Drive belt for Dayco it's hard to find online. I did a bit of research and found out that Dayco Drive Rite 5060613DR Serpentine Belt is the correct belt for my car. Hope this saves ppl some headache trying to locate Dayco. From the research I did, Dayco belts last 60k miles whereas Contitech belts only last for 30k miles.
    135. johnnyboy77
      31 Dec, 2013
      Works perfect! New materials it's also cheeper than local auto parts store. Recommended to everyone who needs this product. Thanks.
    136. Christopher
      30 Dec, 2013
      Time will tell. The original belt was 15 years old and still serviceable but was starting to get transverse cracks and show some cord on the flat side. I hope this one lasts as long.
    137. Damian Harouff
      26 Dec, 2013
      Worked fine on my 99 Mercedes E320. Seemed to be good quality, tracks well on the pulleys. Recommended, especially since your local auto parts store is going to have a worse-quality belt for more money.
    138. RichardC "vcrs"
      21 Dec, 2013
      Dayco belts are excellent quality at a good price. Perfect fit. I will continue to buy Dayco belts for my cars.
    139. melingland
      20 Dec, 2013
      Fit perfect on my 2002 ford focus wagon ztw. Great price for a belt the quick lube can charge you $45.00 or more.
    140. miss monkey
      11 Dec, 2013
      Fits perfectly (2006 HHR 2.2L) and no issues. High quality product at a very reasonable price. No disappointments and no regrets.
    141. Gerardo Hernandez Galarza
      07 Dec, 2013
      Great does not make noise, finally. I had changed the belts 4 times and always noise, not any more. Very recommended for a Suzuki xl7 2004.
    142. Gerardo Hernandez Galarza
      07 Dec, 2013
      Great does not make noise, finally. I had changed the belts 4 times and always noise, not any more. Very recommended for a Suzuki xl7 2004.
    143. Travelin' Dan
      01 Dec, 2013
      Quality belt. I have not installed it yet, but have it as a backup for my next project of replacing the tensioner and belt. As usual, AutoPartsWAY came thru with a great price and in stock product.
    144. Steve N "Straussjoe"
      22 Nov, 2013
      Superb! It matches the OEM belt exactly...down to the 5061030 number embossed on the belt. I had the old belt removed and the new one installed in under 15 minutes. A word of advice: Get a long and slim prybar to extend into the pully tensioner area as there is not much room to work in that tight area in a Windstar. You can easily use the pry bar to prop up the tensior while removing the old belt and again when installing the new belt. Superb product. Save yourself about $120 and do it yourself!
    145. steve
      14 Nov, 2013
      price was great and my mechanic said it was top quality so have nothing to complain about this AutoPartsWAY product
    146. P.S.
      14 Nov, 2013
      its a belt, and it fit and it didnt fly apart, what more could you want? dayco is always a good brand
    147. Vincent
      12 Nov, 2013
      I chose a five star rating from past great experience using Dayco products.I replaced both belts on my 2007 Dodge Caravan 2.4 litre engine.I havn't had any issue's since installing these belts. Its been over a year since the install.I highly recommend this product.
    148. Sierratango
      08 Nov, 2013
      Good quality replacement serpentine belt for my 95 Nissan Altima. It is significantly less expensive than the auto parts stores.
    149. Diane
      08 Nov, 2013
      tensionerIt's too early to tell for certain but I think this belt along with the new Dayco heavy duty belt tensioner are going to solve my problem with my 97 Dodge Ram 3500.I was going through a belt and tensioner once a year. My mechanic says this belt seems to sit on the tensioner pulley more squarely (my understanding of what he said, not his actual words).
    150. J. F. Williams
      08 Nov, 2013
      I have run this belt for one thousand miles, this belt is very quiet. I would but this belt again.
    151. Stephen G Cox
      01 Nov, 2013
      These belts resist the noise these engines start to make at high mileage when the pulleys tension gets a little weak. These type belts cost a little more but seem to hold off that noise. Its worth it.
    152. h2o
      30 Oct, 2013
      I always keep an extra in the trunk, just in case you happen to "throw a belt" or "break a belt" while out driving or on a vacation trip..Good car maintenance will keep you from breaking down, but having an extra belt...this is a must...especially if your miles from anyhelp or driving at night...well worth the money to have an extra...made of good quality material right here in the USA....
    153. B. Valentine
      30 Oct, 2013
      This is a seemingly well built piece and the installation was OEM in nature. it was simply a bolt on part. (generic review for car parts)
    154. twiggy02919
      25 Oct, 2013
      This belt fits perfectly in my 2000 Toyota Sienna van. The old belt I removed was Toyota OEM which was this same model Dayco Belt with the Toyota brand stamped next to it. So I got this belt from AutoPartsWAY/Dayco for less than half of what it would cost from Toyota for the same exact part.
    155. streetsense
      20 Oct, 2013
      I did a lot of shopping around for the exact correctly fitting belt. I am ready when the old belt breaks.
    156. Just Another Trumpet Player
      16 Oct, 2013
      The belt fit my 1998 Jeep Cherokee 4.0 perfectly and has worked fine for nearly two years now.What more is there to say?
    157. chuktuk44
      04 Oct, 2013
      This belt is made by Dayco, one of the leading makers of automotive parts in the world, of course I love the product, who wouldn't. Great parts like this give you peace of mind when doing your own auto repair.
    158. Troy Walker
      02 Oct, 2013
      Wasn't the brand that I ordered. Was supposed to be a Draco. Did not see that brand on the belt itself.
    159. WNYer
      20 Sep, 2013
      Great service and fast delivery. First I went to the Dayco site to confirm the proper product code before I ordered on AutoPartsWAY. Here's a hint, fit the belt on the farthest pulleys first then over the water pump pulley last - no groves.
    160. TRU
      20 Sep, 2013
      Purchase this item and installed it a little over 2 years ago today. Product still looks new and in tact just like it came of the floor shelf. Definitely recommend this Dayco product!
    161. Roy
      16 Sep, 2013
      This serpentine belt fit my vehicle perfectly and was easy to install after watching a "How To" video on line. I am pleased with this purchase and saved money doing the job myself.
    162. Menno Aartsen "MEA"
      14 Sep, 2013
      All I can say is that on an older Durango or Dakota, doing this relatively cheap bit of maintenance - belt, plugs, coolant - is very worthwhile. I have no way of technically comparing the factory Champions that were in my 2003 Dodge Durango SLT 4.7 with compatible plugs. I replaced the serpentine belt at the same time I did the plugs, and as the new belt had half an inch less diameter than the old one, it is possible that the old belt was slipping a bit. All I can tell you is that, after resetting the PCM (propulsion control module) on the car, its V8 is much smoother and quieter than it's even been (I bought it used at 65,000 miles, it now has 97,00).
    163. Dr. Doom
      12 Sep, 2013
      This belt is listed in many places as being the correct belt for my car (2008 Elantra GLS) but it is way too short. At least I discovered that my water pump is totally shot so I will order a different belt and a water pump and replace them together.
    164. N.
      06 Sep, 2013
      Bought this belt to replace a belt that was getting old and a little weather checked.The dealership wanted a hundred bucks to swap out the old one. This cost be $20 and took about 10 minutes with some tools (only needed a long breaker bar and a clamp).
    165. T. Johnson "ti johnson"
      24 Aug, 2013
      excellent fit - very durable construction/longest lasting - will not slip / even when soaked - best value available anywhere...Dayco engineering is the best & it shows.
    166. nike
      22 Aug, 2013
      Better than OEM belt on my Honda. Accord at a fair price! Easy to install! Cheaper than at local auto part store'
    167. Chance Malloy
      05 Aug, 2013
      No matter what tension it will squeak under high load on a 1.5L toyota echo. Replaced with a goodyear and no more squeak.
    168. Morkgto
      26 Jul, 2013
      Fit 2005 F250 single alternator no problem...appears to be a sturdy belt very similar to factory one. Will purchase again if needed
    169. savvas korakas
      25 Jul, 2013
      Made in USA. That's a 5 star by itself. Best warranty on the market (3 yrs). Quality is by far the best in the business. Like i said, American from top to bottom, and price was a steal. Good Job Dayco. Keep some jobs in our country.
    170. Ruben Velez
      21 Jul, 2013
      Dayco its one of the best belt around and the prize was right i purchase it with the harmonic balancer
    171. Darren DeLaup
      20 Jul, 2013
      I was told at the auto parts store that this was the better quality brand of belt. When I saw it on AutoPartsWAY, I grabbed it. Could not beat the price for a high quality part.
    172. Bob Tucker
      08 Jul, 2013
      Yeah, these need to be changed every so many years/miles. Mine was squeaking and squealing and for the longest time I thought it was the A/C compressor or alternator or something, but turns out it was only the fan belt. It's been on my vehicle for several months now and is doing the job well. Very pleased.I must mention though that the first belt that arrived was the wrong one, even though the packaging had the correct part number on the side. It did not match what was actually in the package. When I called AutoPartsWAY, they sent me a replacement OVERNIGHT. VERY VERY please with how AutoPartsWAY handled this!
    173. Heisenberg
      06 Jul, 2013
      I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
    174. Heisenberg
      06 Jul, 2013
      I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
    175. Heisenberg
      06 Jul, 2013
      I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
    176. Rob Z
      03 Jul, 2013
      I originally purchased all OEM AC Delco products for my 6.5L Suburban. I found this belt to be quieter and have been very happy with it. I was replacing pulleys and still having the chirping. Finally tried this belt and it is quiet again!
    177. Scot N Kenkel
      03 Jul, 2013
      I know VERY little about cars, so when my 99 Ford Taurus lost power steering, battery power, and began overheating like crazy I was scared of the prospective repair bill, and wondered: "is this the end of my beloved "tortoise". Thousands in repair bills loomed... But, NO!! Turns out the old belt (which controls pretty much everything) had slipped off. Luckily, this belt is Poly-Ribbed for your car's pleasure. Installation was easy with an extra set of hands. And, with more grip, no more slip! She is now one happy car and sure to go for at least 100k+ more miles. HIGHLY RECOMMENDED!
    178. rayman59
      24 Jun, 2013
      Put this on my wife's 2001 Pontiac Grand Prix 3.8L v6 supercharger after the old pulley bearing froze up and shredded the old one. Fit perfect just like it was made for it!!!!!!
    179. duc le
      13 Jun, 2013
      I have been using it for six months..this time it's still OK and works very good. I will share some information with my friends.
    180. JAMES GASSER
      12 Jun, 2013
      This belt seems like it is a better quality belt then the OEM belt. It is very quiet so far, but of course time will tell. The stock belt was $120.00 from the dealership and 1 hour labor at $100.00.to install a new one.
    181. USCGsnipe
      12 Jun, 2013
      Pretty Standard serpentine belt. Install it and drive until it needs to be replaced again. The price on this one is great and shipping was a breeze. No defects or questionable quality. Great belt, great product, great company.
    182. RYAN HOFFMAN
      10 May, 2013
      Great quality belt you can tell as soon as u look at it. Came fast and easy to put on so I give it 5stars
    183. James T
      26 Apr, 2013
      Great belt, good quality. I have used these belts on other cars and none have ever failed. Would recommend this product.
    184. J. Lafrenz "kahuna1342"
      17 Apr, 2013
      Fit just fine in my 1999 Tahoe. Seems to be very quiet and smooth. No problems at all and the price was good.
    185. Zeya
      09 Apr, 2013
      I don't mean to affect the product's review rating one way or another. I'm sure the belt itself is just fine. My problem was that I found online that this part number would fit my car (Mazdaspeed 3), but it doesn't. It was about a half inch too short. Just a heads-up.
    186. Owen Shiverdecker "Owen"
      26 Mar, 2013
      This was a easy 10 min. install on my 2.0 Jetta, The belt appears thick with a abrasive surface for mating up.
    187. Sam Valcaniant "svalcaniant"
      15 Mar, 2013
      Product arrived early. Great price when compared to other local part stores. I would recommend this vendor for auto parts.
    188. J. F. Vogel "Road Runner"
      06 Mar, 2013
      Dayco is an excellent brand of serpentine belts. I have used them on most all cars and trucks that I have owned and they have performed well. Teamed up with AutoPartsWAY is is winning combination.
    189. TSS66
      02 Mar, 2013
      What can you really say about these after market parts. It fits and it works okay... so far. I'll update this review in the future if something goes wrong, but I doubt it. Price was 1/2 that of the OEM brand.
    190. Ace Cool "Joe"
      27 Feb, 2013
      One continuous loop with no beginning or end, cool how that works. Reminds me of how our politicians operate. They keep doing the same thing over and over. Its time for change, not this iffy changey kind of stuff.
    191. Kam14
      27 Feb, 2013
      Purchased for my 08 Subaru Outback and it went on without a problem. Appears to be a high quality belt.
    192. Boudin
      23 Jan, 2013
      Goodyear 4080945 Gatorback Poly-V Belts
    193. M. Crane "CRANK13"
      09 Jan, 2013
      I cannot believe that this belt was only $7.74! What a great product at such a reasonable price! Thanks AutoPartsWAY!The belt itself is of a high quality, with the reinforcement fabric visible. Compared to the exact same belt that you can buy at your local auto-parts store, this is the better choice, by far!
    194. RST
      07 Jan, 2013
      What can you say about a serpentine belt? It works great, fits perfectly. Easy to install with a socket wrench and a pvc pipe extension.
    195. Christop82
      24 Dec, 2012
      the belt is well made and fit very snug. if your going to replace yourself, i would recommend using a serpentine belt tool. it was difficult to do with a standard ratchet.
    196. pastrol
      08 Dec, 2012
      It was a perfect fit for my 2005 Altima, 2.5S. I now have a smooth a quiet ride. Dayco makes good quality stuff so I will see how well this one holds up.
    197. bigme07
      18 Nov, 2012
      Not sure what to say besides it was ontime and as advertised. I will be buying another one for the truck when I hit 200,000 miles.
    198. Just Fix It
      13 Nov, 2012
      This was purchased after researching what other Ranger owners had to say. Maybe there is a trick that I don't know, doubt it, I've put belts on before on occasion, but this one is a tight fit. It was difficult to maneuver over the last pulley, which is why I didn't give it a higher rating. I haven't had it long enough to rate it's longevity. I'll check back on that.
    199. John E. Heyer
      31 Oct, 2012
      I used this belt on a 2004 Subaru Forester XS, paired with a . The old belts were made by Mitsubishi and were slightly stiff with small cracks, so after 35,000 miles, they definitely needed to be changed out.The Dayco belt appears to be good quality and went on without a problem. I've noticed less whistling / chirping when the car is idling, so it was money well spent. We'll see how they hold up.
    200. EddieE
      19 Oct, 2012
      Great item and fifteen bucks cheaper than the local auto parts store, with free shipping. Replaced the older belt perfectly on a 4.6L engine, no problems installing at all, 15 minutes and it is done. I would recommend this belt, great price and excellent quality.
    201. dan el man
      10 Sep, 2012
      was in the process of placing in an alternator and decided to swap belts, this one fit perfectly and had the right amount of ridges....3months later and no squeaks or rattles....works perfect....
    202. NonstopInk
      14 Aug, 2012
      I purchased this belt for my Hyundai sonata 2004.After about half an hour of putting it on, the car didn't squeak anymore.It's been several months now and haven't had any issues, but of course if I do - I'll be sure to come back and update the review.So far so good.
    203. R. taran
      14 Aug, 2012
      Less cost than any parts store & fast shipment. Much easier to buy parts here than standing in line at the local auto parts store dealing with lazy, incompetent employees.
    204. NonstopInk
      14 Aug, 2012
      I purchased this belt for my Hyundai sonata 2004.After about half an hour of putting it on, the car didn't squeak anymore.It's been several months now and haven't had any issues, but of course if I do - I'll be sure to come back and update the review.So far so good.
    205. G. Forster
      23 Jul, 2012
      This belt is for my 2003 Mazda MPV with the Ford 3.0L V6. The original belt lasted 180K miles, and still looked pretty good, but the water pump belt was looking rough, and we had the summer vacation coming up, so I felt it was time to replace both belts. The pulley was replaced at the same time.Be sure to take a photo or carefully diagram the path of the belt, so that it goes back on as easily as it comes off. The whole project (both belts and a pulley) took less than an hour. It's a perfect fit.
    206. J. Podvin
      09 Jul, 2012
      It does what it is supposed to. What more can be said? I bought this for a 2004 F250 with a PowerStroke diesel motor. Fits perfect and takes up the slack that my tired old OEM belt had after 90,000 miles
    207. BA
      11 Jun, 2012
      The belts worked fine on my BMW 330i as soon as installed. No issues that. I'd recommend them to DIY community. Made in the USA
    208. Green Bastarde'
      25 May, 2012
      This product fits my 1997 jetta tdi perfect! I hope this review helps you decide if this item fits your motor. 1z diesel 1.9 TDI
    209. Greer Evans "Greer Lee Evans"
      23 May, 2012
      I purchased this belt to replace one that was soon to snap leaving me stranded and having to wait on a tow truck. It is still in good shape after 10,000 miles. It had a nice warranty and so far so good.
    210. Gearz
      22 May, 2012
      I use Dayco belts on all of my vehicles because they are the best belts on the market. When i received my order the belt container said Drive Rite on the package but in small print it says it is manufactured by Dayco so make sure your getting the best belt and check that it is made by Dayco.These belts are quite and last a long time and resist piling and cracking.
    211. CUONG
      16 May, 2012
      This serpentine belt fix with my car,and made from USA,good quality as I expected,I will order some to spair for my cars.
    212. phil900
      15 May, 2012
      I've used Dayco belts for years and have found them to be the most durable of all the major brands. They stand up well to oil and water exposure (though none of those things should be exposing themselves to the belt).
    213. dcfolsom
      10 May, 2012
      This belt at under $10 is the exact same belt I paid 28 for at one of the discount auto parts stores 2 years ago. Shipped quickly and branded with manufacturer's name, and you will recognize it.
    214. A.J.
      22 Apr, 2012
      The title says it all - This product fits and works perfectly on my car, a 2002 Pontiac Grand Am SE1 with the 2.2L Ecotec 4 cylinder. Installation was also very easy. Take off the right front wheel, remove the plastic access panel in the back of the wheel well, lift up on the tensioner to release the belt, slip off the old one, and reverse that process to install the new one. Another great thing - this belt is made in the USA.
    215. Ray Saez, Jr
      12 Apr, 2012
      Quality belt, fit my custom application just fine. Did my homework and figured out what length I would need after deleting my smog pump and purchased. Better price than my local auto parts store too, even after shipping.
    216. Dom
      30 Mar, 2012
      Purchased this belt as a precautionary measure when replacing my alternator. It was a perfect fit, but if you don't tension it properly it will turn some heads of attorneys that you work with so you can hang your head in shame while they are all driving new Mercedes SLS's and you're pulling away in your 5 year old Yaris.
    217. blues217
      20 Mar, 2012
      Serpentine Belt Great fit and Price. Shipping was fast. All around great transaction. We will see how long it last because this goes on a old trash truck that sits out in the elements.
    218. Y. C. LIU
      12 Mar, 2012
      The belt is a great fit for my 1998 Toyota Camry LE and was installed for AC compressor and alternator. I was pleased to replace it with Dayco product. It is a good belt so far.
    219. Y. C. LIU
      12 Mar, 2012
      The belt is a great fit for my 1998 Toyota Camry LE and was installed for power steering pump. It is a good belt so far.
    220. Air450
      04 Mar, 2012
      I have an offroad car and the dirt and sand wear out the belts fast. These work great and I buy extras. Fast delivery and great service.
    221. Elderly Person
      12 Feb, 2012
      I paid $7 total for this belt which sells for $15 to $20 at various local auto supply stores. It was on my front porch 2 days after I ordered. Dayco is an old US brand. Also, all these type belts are made to an SAE specification. The quality of this belt appears every bit as good as two other OEM Nissan belts I got from the dealer.
    222. Jim
      05 Feb, 2012
      Bought this belt at local autozone for my 07 dodge dakota, no problems at all so far, fixed the squelching noise which is consistent with a loose/worn belt, power steering improved which again is consistent with a worn belt. Nothing fancy, does what it was designed to do, no actual improvements, just new.
    223. D. L. Dawson
      29 Jan, 2012
      This has to be the longest belt I have ever installed. There seemed like a dozen pullies it went over and under. In the end though it fit exact and was quiet.
    224. S.Mace
      24 Jan, 2012
      Bought this for my Prelude as this is listed by Dayco as correct size. However, unless you want to spend 3 hours skinning all your knuckles and swearing a lot I suggest you get the slightly larger size (6PK1045, 6PK1050) belt. The adjustment is right at the "negative" end (i.e I can't make the belt any looser without the adjustment mechanism just about falling apart). The original OEM belt I replaced was a Mitsuboshi 6PK1045 but Dayco do not make this exact size, the next one up is Dayco 5060415 which they have as a 6PK1050/6PK1055. I suggest you try that but I think it might be too big or get another brand.[...]
    225. Jemmie Wang
      21 Jan, 2012
      Fan belts are not rocket science items. They're the kind of thing that you only hear about if it breaks or does not fit.Dayco's ribs are not entirely level, by design - they have slight grooves on the ribs. I think it's so that when it goes around curves there's less compression and stretch on the ribs. Hopefully that increases its longevity.This was for my 2000 BMW M5 and it fits and works perfectly. That's all you need to know.
    226. me
      18 Jan, 2012
      The belt seems to be good quality and is doing the job that I needed it to at a discounted price compared to my local parts house.
    227. Gary J. Weldele
      16 Jan, 2012
      I don't know how they got that belt to me for that little money!!! But Great Service and Better price!
    228. AutoPartsWAY Customer
      18 Dec, 2011
      This product does what it is supposed to do. I use it on my 1950 Studebaker pickup truck. Fits my serpentine system fine.
    229. Andrew B. Moore
      09 Dec, 2011
      I bought this for my wife's 2004 Corolla which had an old, squeaky belt (in rainy weather). I heard good things about Dayco, so went with this item. I can't say much about durability because we sold my wife's car a year later, but it worked perfectly and silently during that year.
    230. TexasHammerhead
      06 Dec, 2011
      This belt was ordered for a 1991 Ford extended cab with a 460 with A/C, Power Steering and worked great. When I bought the truck the A/C was bypassed, so I had to replace the compressor and belt. I was worried it wouldn't fit but it actually did! I double checked the fitment on another auto parts site before I ordered just to make certain.
    231. Bill Tanner
      28 Oct, 2011
      This was a good OE replacement for my 2005 Acura TSX. I don't know if it's better or worse than any of the others available, and if you were to buy on price alone, I'm not sure where this would slide in. This review is after the fact as I replaced the belt sometime back during the early summer I think. That said, I usually do quite a bit of research before I buy, so I must have had a good reason. I'd recommend the belt.
    232. David Cabrejos
      04 Oct, 2011
      Bought this for my 1999 Ford Taurus.According to AutoPartsWAY, it is compatible with my car.On most stores, I found the Dayco 5060855 Serpentine Belt to be compatible and didn't know what the "DR" meant in the end of this model.I loved the price of this one $14.76 shipped, but when it arrived, it says it's a V Serpentine Belt. I thought it was either a V Belt or a Serpentine Belt.I bought the Dayco 5060855 Serpentine Belt for $26.80 shipped through AutoPartsWAY as well. Almost double the price, but clearly stated that it was a Serpentine belt, with the pictures of my engine as well! I felt much safer installing the Dayco 5060855 Serpentine Belt and not the Dayco 5060855DR Serpentine Belt.Quality of the Dayco 5060855 Serpentine Belt seemed better as well.Seller, please be more specific and add pictures of your items if you want to sell them nicely!
    233. huck finn
      04 Oct, 2011
      I`m very please with this belt. I ended up tring the Gator back belt from Good Year. but this one looks very good. It fit my 1998 Altima GXE WP,ALT, PS.
    234. Steven E. Medved "Steve M"
      28 Sep, 2011
      The belt fits perfectly and is better than the original factory one at a price of half of what the cheap one was at the local auto parts store.
    235. Air450
      11 Sep, 2011
      Works great and looks to have nice quality. I have to replace my belts and have backups because I use these on my offroad car.
    236. Vinnie
      26 Aug, 2011
      Belt is fine, meets OE criteria fits as advertised. Only have used for a week about 400 miles, no issues.
    237. shads-dad
      15 Aug, 2011
      I put this belt in my 1998 Chrysler Sebring convertible. Installing it wasn't much fun because of the work needed just to get to it, but the belt is of high quality. It fit perfectly and hasn't stretched. I've had it on the car for about a month now.
    238. adamspeed
      07 Aug, 2011
      the belt came on time and was the right belt took old one off slip the new one on no problems work great, needed a new belt after 90k the price was great would recommend these product.
    239. Runner1326
      29 Jun, 2011
      Arrived quickly, and with the help of my brother the mechanic, installed pretty easily too. Works fine. Quieter than the one it replaced.
    240. Jake, from State Farm
      26 Mar, 2011
      DAYCO invented the serpentine belt for the Hi-Po FORD Mustang V8 -- and the power-saving properties of the serpentine design were soon copied by auto manufacturers from all over the world !! Along with the power savings, the DAYCO's ribbed contact area and "cog" design provides cooler running, less noise, and longer belt life. I have used the DAYCO 5060980 on 2 different 4.6-liter FORD cars, with over 140,000 miles accumulated without any sign of wear or damage to either of the belts. They run cool here in the scorching Arizona desert, and they're very q-u-i-e-t, too -- with NEVER a squeal or chirp, despite the hottest weather !! See the DAYCO website for tips on how to check for wear, pulley alignment, what to look for, etc. Be sure to check the application chart to get the CORRECT FIT !! AutoPartsWAY.com's low price and speedy delivery keep me coming back !! Thanks, AutoPartsWAY !! Good Luck !!
    241. Max
      13 Mar, 2011
      Used this on my 1998 supercharged camry V6. Held up just fine while I was using it with a 6lb pulley. No complaints - nothing big to report!
    242. Kzziggy1
      14 Feb, 2011
      Used it on two nissan titans and 2005 and a 2007 was easy to change with help from a friend and way cheaper than the dealer, used my tork wrence as a cheater with I think a 14mm on the tensioner pully removed the skid plate under the truck was done in 7 minutes with the second truck! Took 30 minutes doing the first one.
    243. monica marchetti
      17 Dec, 2010
      The belt was 4 years old, according to the date code on the belt. Spend more for a new belt.
    244. sawandsew
      09 Dec, 2010
      I purchased this dayco poly-rib belt for our 1999 Saab 9-3 vehicle. I picked this belt for the quality as it is a bit more pricey than others but rated better. So far, it has held up well. I recommend 2 people installing this belt on a 9-3 as it is one of the more difficult drive belts I have done. One trick is to make sure the belt is centered well in all of the lower pulleys and also on the idler pulley but just off the upper left-hand pulley before pulling on the tensioner. While one person is pulling the other person can slip on the belt and make sure the belt is centered on all pulleys. This seemed to work the best for me.
    245. d.medic
      28 Sep, 2010
      I recieved a P drive belt. The reason I ordered this belt was because it states it is a cog drive. I wanted a cog drive! The P drive belt worked ok and I needed it for a weekend car show. Hope I can still get a cog drive. Even the picture shows a cog drive.
    246. A. Trujillo
      10 Aug, 2010
      I bought this for my 1995 Chevy Camaro V6 3.8L with air conditioner. For those who were wondering whether it has it or not, yes this belt comes with AC. Seems very durable and my mechanic said it was a good brand. Buy it off AutoPartsWAY and save a lot of money rather than buying somewhere else. Highly recommend this product if you are in need of a belt.
    247. Big Ed
      07 Jun, 2010
      Daycos Poly W serpentine belt is amazing. I tried everything to eliminate this annoying squeel from my cars engine. Then i read a review on the Dayco PolyW belt and figured id give it a shot. AutoPartsWAY.com had the best price and combined with the purchase of another product i wanted, i was entitled to free super saver shipping! cant beat that deal.
    248. Gregory Chernis
      07 Feb, 2010
      I reached for a replacement belt since I heard a distinct noise from under the hood of my 2002 GTI VR6. Inspected existing belt and noticed cracks.Replaced the belt and the noise was still there, but a little more sustained.Replaced belt tensioner. Since then, all is nice and quiet.
    249. Steven E. Medved "Steve M"
      18 Jan, 2010
      This belt is made in the US and is of better quality than the Toyota one. It is a perfect fit for my 2003 Corolla and after I replaced the defective Toyota belt tensioner assembly and installed the Dayco for the first time ever I have no belt noise.The serpentine belt tool that harbor freight also sells makes the job of replacing the belt easy.Using just the long bar and a 19 MM 3/8 inch drive deep socket on the lug on the tensioner casting you can pull it toward you to cause the tensioner to give enough slack to remove the belt from the alternator. Once you remove and replace the belt you use the tool to give you the slack to put the new belt on the alternator pulley.If you need to replace the tensioner assembly the job will take about two hours vs 30 minutes for the belt only.
    250. Alex
      23 Dec, 2009
      This was the first time I ordered any automotive part online from AutoPartsWAY and I was not disappointed. The belt was the exact size for my girlfriend's Toyota Corolla. The serpentine belt was manufactored in the USA by Dayco. The quality of the belt was excellent. I would recommend Dayco drive belts through AutoPartsWAY without hesitation.
    251. CowBrains
      28 Oct, 2009
      This has 7 ribs w/ 6 grooves which fits my 2004 Acura TSX perfectly. Infact it's actually better than the belt originally came w/ the car. Belt is made in Canada and not somewhere cheap/brittle like China. Japanese belt manufacturers are good too.
    252. Ryan Stein "Scheißeglück"
      25 Sep, 2009
      If replacing your stock OEM belt, this fits perfectly in place. The only issue I had whit this is it squeaks like crazy when first installed, and squeaked for the longest time until I put some belt dressing on it. If you don't want to deal with the noise of this belt, a gator-back style of belt would be better. But, for the cost, this belt gets the job done.
    253. Rusty SA Taylor "RT"
      22 Aug, 2009
      It is nice to know you can get a replacement part for your vehicle without being robbed in the process.It is nice to be able to count on the part comming in the mail is of good quality workmanship.
    254. Phillip Fry
      04 Jun, 2009
      I always use dayco. In my opinion there is no better belt on the market.
    255. m.r.h. "ColemanFlGuy"
      15 May, 2009
      Great quality. AutoPartsWAY.com price was 1/2 that of the auto parts stores near me. Highly recommened.
    256. R. Wilson
      08 Sep, 2008
      Order the correct belt for you vehicle and it will work. I mean, how much of review can you do on a belt. LOL It worked for me.
    257. D. Thurow
      29 Mar, 2008
      Everything arrived on time. The belts and other components fit and worked out of the box. In about three years I will know how well they last.
    258. Rick
      26 Feb, 2008
      This belt is well made and fit perfect with my underdrive cranshaft pulley for my 07 Corvette.

    Loading...