Shop By Product Matching "K&N ps-1004"


Showing 1 - 10 of 65 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle
2022 - Hyundai Kona N

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Hyundai Elantra L 1596 4 Cyl 1.6L -

Wix
  • WIX Cartridge Lube Metal Free Filter
  • Original Equipment Part Number 26320-3C30A; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Outer Diameter Top: 2.559
    • Duty Type: Ld
    • Micron: 18.00
    • BetaRatio: 2/20/75=18/28/31
    • Style: Cartridge Lube Metal Free Filt
    • Media Material: Cellulose
    • Outer Diameter Bottom: 2.559
    • Class: C
    • Inner Diameter Bottom: 0.984
  • WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.

This Part Fits the Following OEM/Substitute Numbers:
0410846, 26320 2A500, 26320-2A500, 26320-3C30A, 26320-3C700, 26320-3F100, 263203-C300, 26330 3C300, 263303C300, 27029, 2OHY005, 3848, 57029, 618-57029, 67029, 7029, 72257WS, 729...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2016 - Kia K900 V 3778 Canada 6 Cyl 3.8L 231

Wix
  • WIX Cartridge Lube Metal Free Filter
  • Original Equipment Part Number PF463G; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Outer Diameter Top: 2.559
    • Duty Type: Ld
    • Micron: 18.00
    • BetaRatio: 2/20/75=18/28/31
    • Style: Cartridge Lube Metal Free Filt
    • Media Material: Cellulose
    • Outer Diameter Bottom: 2.559
    • Class: C
    • Inner Diameter Bottom: 0.984
  • WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2015 - Kia K900 V 3778 Canada 6 Cyl 3.8L 231

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 2630035504 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.15
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 280
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331, 0370-23802...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2021 - Hyundai Veloster N L 1998 United States 4 Cyl 2.0L 122

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 26300-35504 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.15
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 280
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

Additional Fitment Information:
Vehicle Block CC Position Region Engine CID
2019 - Hyundai Veloster N L 1998 Main Canada 4 Cyl 2.0L 122

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2018 - Honda Clarity L 1497 4 Cyl 1.5L Plug-In Hybrid Touring -

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Kia Sportage L 1998 4 Cyl 2.0L 122

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Mad On Or After 4/3/1992~Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1992 - Plymouth Laser L 1997 4 Cyl 2.0L RS 122

Gates
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width:
      • .47
      • 12
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1235
      • 48.61
    • Construction: Notched
    • Cross Section Designation: Hc50
    • Effective Length:
      • 1219
      • 48
    • Angle: 36
    • Cord Material: Polyester
  • Suggested Purchase Quantity: 3
    • Most jobs typically require 3 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0000323722, 0023255195, 0029979892, 0034939800, 0070119, 007014, 0080329030, 0110046, 0200103, 0227470, 027000345, 027015399, 027016057, 027018399, 027018526, 027070989, 027074377, 027131286...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1970 - Jeep DJ5 L 2197 Governor GAS 4 Cyl 2.2L 134
Showing 1 - 10 of 65 products

Loading...