2011 Acura TL Wheel Bearing Parts

Choose your Engine for your 2011 Acura TL


Showing 1 - 10 of 31 products
Image
SKU
Product
Rating
Price

NSK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.

Additional Fitment Information:
Vehicle Position
2011 - Acura TL Front

Transit Auto
  • Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • Exclusive G-Coating avoids corrosion
    • SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Rear Coated Genius
    • Kit variations : KBB-113122 KBB-113141 KBB-113154 KBB-113206 KBB-113250 KBB-115455 KBB-115533 KBB-115606 KBB-117287 KBB-117505 KBB-117861

This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391, 748880738, 748881892...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2011 - Acura TL Front and Rear FWD

Transit Auto
  • with Harness
  • KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard. Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
    • INCLUDES: 1x Front Kugel Wheel Bearing + 1x Front Mpulse ABS Wheel Speed Sensor
    • Kit variations : K7S-102179 K7S-102421

This Part Fits the Following OEM/Substitute Numbers:
2ABS2658, 412.901, 510095, 57455TK4A01, 5S12835, AB1011, FW26, H510095, N/A, WB000019

Additional Fitment Information:
Vehicle Block CC Position Engine BrakeABS CID
2011 - Acura TL V 3664 Front 6 Cyl 3.7L 4-Wheel ABS -

Transit Auto
  • with Harness
  • KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard. Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
    • INCLUDES: 1x Front Kugel Wheel Bearing + 1x Front Mpulse ABS Wheel Speed Sensor
    • Kit variations : K7S-102421 K7S-102733

This Part Fits the Following OEM/Substitute Numbers:
2ABS2657, 412.900, 510095, 57450TK4A01, 5S12834, AB1010, FW26, H510095, N/A, WB000019

Additional Fitment Information:
Vehicle Block CC Position Engine BrakeABS CID
2011 - Acura TL V 3664 Front 6 Cyl 3.7L 4-Wheel ABS -

Transit Auto
  • with Harness
  • KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard. Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
    • INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Mpulse ABS Wheel Speed Sensor (Both Side)

This Part Fits the Following OEM/Substitute Numbers:
2ABS2657, 2ABS2658, 412.900, 412.901, 510095, 57450TK4A01, 57455TK4A01, 5S12834, 5S12835, AB1010, AB1011, FW26, H510095, N/A, WB000019

Additional Fitment Information:
Vehicle Block CC Position Engine BrakeABS CID
2011 - Acura TL V 3664 Front 6 Cyl 3.7L 4-Wheel ABS -

Transit Auto
  • Transit Auto offers the most comprehensible bearing and suspension kits on the market. The unmatched robustness coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
    • INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Outer TOR Steering Tie Rod End (Both Side)
    • Kit variations : K7T-100882 KBB-100272 KBB-101040 KBB-101129 KBB-101222 KBB-101471 KBB-101773 KBB-102080 KBB-102412 KBB-102766 KBB-117652 KBB-118170 KBB-118875

This Part Fits the Following OEM/Substitute Numbers:
2693670, 2693671, 401-2333, 401-2334, 510095, 534-946, ES800589, ES800590, FW26, H510095, MS60631, MS60632, SEH081L, SEH081R, TES800589, TES800590, TRB-510095, WB000019...VIEW MORE

Additional Fitment Information:
Vehicle Position
2011 - Acura TL Front

Transit Auto
  • Transit Auto offers the most comprehensible bearing and suspension kits on the market. The unmatched robustness coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
    • INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front TOR Suspension Stabilizer Bar Link Kit (Both Side)
    • Kit variations : K7T-100138 KBB-100272 KBB-101040 KBB-101129 KBB-101222 KBB-101471 KBB-101773 KBB-102080 KBB-102412 KBB-102766 KBB-117652 KBB-118170 KBB-118875

This Part Fits the Following OEM/Substitute Numbers:
18750092, 18750093, 2653051, 2653052, 510095, 545-1765, 545-1766, 58200058, 58200059, FW26, H510095, K750092, K750093, MS60868, MS60869, SL50031, SL50032, SLH080L...VIEW MORE

Additional Fitment Information:
Vehicle Position
2011 - Acura TL Front

Transit Auto
  • Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • Exclusive Drill and Slot design for left or right installation
    • SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Re
    • Kit variations : KBB-113122 KBB-113141 KBB-113154 KBB-113206 KBB-113233 KBB-113250 KBB-115455 KBB-115606 KBB-117287 KBB-117505 KBB-117861

This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 2164689, 2164690, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2011 - Acura TL Front and Rear FWD

Transit Auto
  • Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • Exclusive Drill and Slot design for left or right installation
    • Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Coa
    • Kit variations : KBB-113122 KBB-113141 KBB-113154 KBB-113206 KBB-113233 KBB-113250 KBB-115455 KBB-115533 KBB-117287 KBB-117505 KBB-117861

This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 2164689, 2164690, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2011 - Acura TL Front and Rear FWD

Transit Auto
  • Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
  • Transit Auto
  • Features:
    • Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
    • Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
    • Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
    • Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
    • INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
    • Kit variations : KBB-113122 KBB-113141 KBB-113206 KBB-113233 KBB-113250 KBB-115455 KBB-115533 KBB-115606 KBB-117287 KBB-117505 KBB-117861

This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391, 748880738, 748881892...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2011 - Acura TL Front and Rear FWD
Showing 1 - 10 of 31 products

Loading...