Engine Cold Air Intake Air and Fuel Delivery Parts

Choose a Year for your vehicle

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009

Showing 1 - 10 of 10 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2023 Ford F-150 Engine Cold Air Intake 6 Cyl 2.7L Roush Performance

ROUSH 2018-2023 F-150 2.7L, 3.5L & 3.5L PB EcoBoost V6 Cold Air Intake Kit
SHIPS FREE. ROUSH 2018-2023 F-150 Cold Air Intake fits 2.7L and 3.5L EcoBoost V6 engines, including Raptor. Increase engine performance with maximum airflow and add aggressive sound.
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2018-2023 F-150 2.7l, 3.5l & 3.5l Pb Ecoboost V6 Cold Air Intake Kit
The ROUSH Performance Cold Air Intake for 2018-2023 F-150 2.7/3.5L Ecoboost V6 engines (including Raptor) brings staggering performance increases, achieved with an installation that takes under an hour, and does not require any calibration! F-150s will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock airbox. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit is the most highly-engineered kit of its kind on the market. Latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2023 - Ford F-150	V	-	6 Cyl 2.7L	164

26 In Stock

$681.19 CAD

$817.43 CAD

Brand	Roush Performance
Part #	R72422089
Condition	New
Warehouse	B

2013 Ford F-150 Engine Cold Air Intake Roush Performance

ROUSH 2011-2014 F-150 5.0L V8 Cold Air Intake Induction Kit
ROUSH F-150 Cold Air Induction Kit produces more airflow over stock filters.
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2011-2014 F-150 5.0l V8 Cold Air Intake Induction Kit
Looking to get more power out of your 2011-2014 5.0L V8 F-150 without spending a fortune? ROUSH Performance has just the solution! Cold air induction is a much more efficient air intake method than the standard air filtering process that the stock engine utilizes. Due to the increase in air flow supplied by this kit, you will also experience better throttle response and overall engine performance. The ROUSH Cold Air Intake Kit will also give your F-150 better appearance under the hood, and will let people know you only use the best products on your truck. No calibration is required when installing this kit either, meaning you don't need to worry about spending additional money to get down the road. Included with this kit will be a new clean air tube, airbox, synthetic reusable/washable high-flow air filter (oiled), and all necessary hardware and instructions.

Additional Fitment Information:

Vehicle
2013 - Ford F-150

6 In Stock

$627.62 CAD

$753.14 CAD

Brand	Roush Performance
Part #	R72421238
Condition	New
Warehouse	B

2019 Ford F-150 Engine Cold Air Intake 6 Cyl 3.5L Roush Performance

ROUSH 2018-2023 F-150 2.7L, 3.5L & 3.5L PB EcoBoost V6 Cold Air Intake Kit
50-State emissions-legal (CARB E.O. #D-418-38).
SHIPS FREE. ROUSH 2018-2023 F-150 Cold Air Intake fits 2.7L and 3.5L EcoBoost V6 engines, including Raptor. Increase engine performance with maximum airflow and add aggressive sound.
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2018-2023 F-150 2.7l, 3.5l & 3.5l Pb Ecoboost V6 Cold Air Intake Kit
The ROUSH Performance Cold Air Intake for 2018-2023 F-150 2.7/3.5L Ecoboost V6 engines (including Raptor) brings staggering performance increases, achieved with an installation that takes under an hour, and does not require any calibration! F-150s will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock airbox. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit is the most highly-engineered kit of its kind on the market. Latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Aspiration	CID
2019 - Ford F-150	V	3496	6 Cyl 3.5L	Turbocharged	213

26 In Stock

$681.19 CAD

$817.43 CAD

Brand	Roush Performance
Part #	R72422089
Condition	New
Warehouse	B

2023 Subaru WRX Engine Cold Air Intake Mishimoto

Performance Air Intake, fits 2022+ Subaru WRX
Performance Air Intake, fits 2022+ Subaru WRX
Product Attributes:
- SellingPoint04: Highly-aggressive Intake Tone Under Acceleration
- SellingPoint05: Powder-coated Airbox Keeps Unwanted Hot Air From Entering The Air Intake
- SellingPoint06: Precision Cnc-machined Aluminum Maf Housing For Improved Flow And Accurate Maf Readings
- SellingPoint07: Mandrel-bent Aluminum Pipe Eliminates Restrictions And Increases Airflow
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Power Gains Of Up To 13.3 Hp And 16.6 Lb-ft On Stock Tune
- SellingPoint03: Dyno-tested For Safe Air/fuel Ratios Without Tuning
- TechSpec Air Filter Part Number: Mmaf-3007
- TechSpec Chassis Codes: N/a
- SellingPoint08: Mishimoto High-flow Oiled Air Filter Receives Maximum Airflow From The Front Of The Vehicle
- SellingPoint09: Us Patent Pending
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Filter Re-oil Is Not Included In Lifetime Warranty.
- SellingPoint15: N/a
- TechSpec Filter Diameter: 5.875
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2022+ Subaru Wrx
- TechSpec Includes: (1) Aluminum Intake Pipe--(1) Cnc-machined Aluminum Maf Sensor Housing--(1) High-flow, Oiled Filter--(1) Powder Coated Airbox--(1) Silicone Coupler--(3) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
Features:
- Direct fit for 2022+ Subaru WRX
- Power gains of up to 13.3 HP and 16.6 lb-ft on stock tune
- Dyno-tested for safe air/fuel ratios without tuning
- Highly-aggressive intake tone under acceleration
- Powder-coated airbox keeps unwanted hot air from entering the air intake
- Precision CNC-machined aluminum MAF housing for improved flow and accurate MAF readings
- Mandrel-bent aluminum pipe eliminates restrictions and increases airflow
- Mishimoto high-flow oiled air filter receives maximum airflow from the front of the vehicle
- Mishimoto Lifetime Warranty
Air intakes are some of the most fundamental bolt-on upgrades to a vehicle, often making them a first for many enthusiasts. The 2022+ Subaru WRX is no different. While the stock set up is adequate for daily commuting, your 2022+ WRX needs to be able to breathe easy to keep up with the demands of an enthusiast's spirited driving. The engineers at Mishimoto set out to unlock your WRX’s full potential with the 2022+ Subaru WRX Performance Air Intake.----Our engineers started by replacing the restrictive stock air filter with our performance oiled cone filter to substantially increase air volume, then paired it with a durable powder-coated steel airbox for superior heat protection. Our CNC-machined, precision-designed MAF housing allows for increased intake air flow while maintaining safe air-fuel ratios, eliminating the need for a tune after installation. This mates with our mandrel-bent aluminum inlet pipe to provide superior airflow over stock and gives your WRX a more aggressive tone under acceleration. This intake boasts a 75.4-percent reduction in air restriction with dyno-proven gains of up to 13.3 HP and 16.6 lb-ft of torque on stock tune.----The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on performance. As with all Mishimoto products, this 2022+ Subaru WRX Performance Air Intake is backed by the Mishimoto Lifetime Warranty.

This Part Fits the Following OEM/Substitute Numbers:

200-60-INT-003

Additional Fitment Information:

Vehicle
2023 - Subaru WRX

7 In Stock

$620.88 CAD

$745.06 CAD

Brand	Mishimoto
Part #	M1NMMAI-WRX-22MWBK
Condition	New
Warehouse	B

UPC: 840197716472

2019 Jeep Wrangler Engine Cold Air Intake 4 Cyl 2.0L Injen

EVOLUTION Cold Air Intake System
EVOLUTION Cold Air Intake System, Part No. EVO5006, 2018-2021 Jeep Wrangler JL L4-2.0L.
Injen EVOLUTION Cold Air Intake System
Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Supernano-web Dry
- Intake Color: Black
- Prop 65 - Short Label: Prop65_warning.jpg
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1108-bb
- Compatible Throttle Controller: Pt0010b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 9

Additional Fitment Information:

Vehicle	Block	CC	Engine	Aspiration	CID
2019 - Jeep Wrangler	L	1997	4 Cyl 2.0L	Turbocharged	122

5 In Stock

$521.69 CAD

$626.03 CAD

Brand	Injen
Part #	I24EVO5006
Condition	New
Warehouse	B

UPC: 843115028534

2020 Chevrolet Silverado 1500 Engine Cold Air Intake 8 Cyl 5.3L Injen

EVOLUTION Cold Air Intake System
EVOLUTION Cold Air Intake System, Part No. EVO7104, 2019-2020 Chevrolet Silverado 1500 V8-5.3L/6.2L, 2019-2020 GMC Sierra 1500 V8-5.3L/6.2L.
Injen EVOLUTION Cold Air Intake System
Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 14
- Prop 65 - Short Label: Prop65_warning.jpg
- Heat Shield Included: No
- Black Hydroshield (Optional): 1119blk
- Filter Color: Blue
- Replacement Filter Part Number: X-1107-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 13

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2020 - Chevrolet Silverado 1500	V	5328	8 Cyl 5.3L	325

1 In Stock

$474.38 CAD

$569.26 CAD

Brand	Injen
Part #	I24EVO7104
Condition	New
Warehouse	B

UPC: 843115028541

2010 Ford Mustang Engine Cold Air Intake Roush Performance

ROUSH 2010-2014 Mustang Cold Air Intake Kit 5.0L & 4.6L V8
Note: This product does not fit ROUSHcharged vehicles.
This Mustang GT Cold Air Intake System fits 2010-2014 Mustang GT's Only.
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2010-2014 Mustang Cold Air Intake Kit 5.0l & 4.6l V8
Designed for the 2011-2014 Mustang GT 5.0L V8, 2012-2013 Boss 302 5.0L V8, and 2010 Mustang GT 4.6L V8, this ROUSH Cold Air Intake Kit includes a high-flow air filter (oiled) with clamp, new MAF tube, airbox tray with installed EPDM foam hood seal, heat extractor foam insert (for 2013-2014 users), and all required mounting hardware. The benefits of this kit include reduced pressure drop and increased performance and efficiency. Both the tray and MAF tube are manufactured using OE-quality materials (30% glass-filled polypropylene) and tooling (fully CNC machined hardened steel plastic injection molds). These provide excellent dimensional capability, stability, and long term durability and performance. This kit uses factory mounting locations and hardware, for quick and easy installation, and maintains OE clearances to all nearby components and hardware. The kit will also include detailed instructions, and also carries the ROUSH 90 Day Limited Parts Warranty.

Additional Fitment Information:

Vehicle
2010 - Ford Mustang

2 In Stock

$530.89 CAD

$637.07 CAD

Brand	Roush Performance
Part #	R72420131
Condition	New
Warehouse	B

2018 Ford Mustang Engine Cold Air Intake Roush Performance

ROUSH 2018-2021 Mustang 5.0L V8 GT Cold Air Kit
50-State emissions-legal (EO D-418-31).
Easy to install. ROUSH 5.0L V8 Cold Air Kit for 2018-2021 Mustangs increases performance and presence with no calibration required. Unlock latent power!
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2018-2021 Mustang 5.0l V8 Gt Cold Air Kit
The all-new 2018-2021 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air intake than the standard stock airbox. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application, ensuring MAF signal performance matches factory settings. Included is an innovative airbox lid with see-through lens. Our dry filter is proven to retain its shape under high airflow, and is composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media. The filter requires no oiling and is easily washable for re-use.

Additional Fitment Information:

Vehicle	Sub Model
2018 - Ford Mustang	GT

8 In Stock

$710.20 CAD

$852.24 CAD

Brand	Roush Performance
Part #	R72422086
Condition	New
Warehouse	B

2020 Ford Mustang Engine Cold Air Intake Roush Performance

ROUSH 2018-2021 Mustang 5.0L V8 GT Cold Air Kit
Easy to install. ROUSH 5.0L V8 Cold Air Kit for 2018-2021 Mustangs increases performance and presence with no calibration required. Unlock latent power!
ROUSH Performance
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Category Type: Cold Air Kits
- Install Time: 1 Hour
- Title: Roush 2018-2021 Mustang 5.0l V8 Gt Cold Air Kit
The all-new 2018-2021 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air intake than the standard stock airbox. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application, ensuring MAF signal performance matches factory settings. Included is an innovative airbox lid with see-through lens. Our dry filter is proven to retain its shape under high airflow, and is composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media. The filter requires no oiling and is easily washable for re-use.

Additional Fitment Information:

Vehicle	Sub Model
2020 - Ford Mustang	GT

8 In Stock

$710.20 CAD

$852.24 CAD

Brand	Roush Performance
Part #	R72422086
Condition	New
Warehouse	B

2014 Ram 1500 Engine Cold Air Intake 8 Cyl 5.7L Injen

EVOLUTION Cold Air Intake System
EVOLUTION Cold Air Intake System, Part No. EVO8100, 2009-2018 Dodge Ram 1500 V8-5.7L, 2019-2020 Dodge Ram 1500 Classic V8-5.7L, 2012-2018 RAM 1500 V8-5.7L, 2012-2018 RAM 1500 Classic V8-5.7L
Injen EVOLUTION Cold Air Intake System
Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 13
- Prop 65 - Short Label: Prop65_warning.jpg
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1116-bb
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr