Trailer Wire Converter Electrical, Lighting and Body Parts

Choose a Year for your vehicle

Showing 1 - 10 of 28 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1998 Audi A6 Quattro Trailer Wire Converter CURT

4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Includes Powered Converter Wiring Kit PN[55152]
CURT 59236 Weather-Resistant Multi-Function Splice-in Trailer Tail Light Converter Kit; 4-Pin Wiring Harness
Multi-Function Taillight Converter Kit
Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microprocessor that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package includes a powered converter wiring kit #55152 and four snap locks for faster, more secure splicing.

Additional Fitment Information:

Vehicle
1998 - Audi A6 Quattro

22 In Stock

$110.50 CAD

$132.60 CAD

Brand	CURT
Part #	59236
Condition	New
Warehouse	C

2007 Volkswagen Passat Trailer Wire Converter CURT

4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Req. Powered Converter Wiring Kit PN[55152] or Similar
CURT 56236 Multi-Function Splice-in Tail Light Converter; 4-Pin Wiring Harness
Multi-Function Taillight Converter
Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microcontroller that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55152 is also required for installation.

Additional Fitment Information:

Vehicle	Sub Model	Body
2007 - Volkswagen Passat	Value Edition	Sedan

25 In Stock

$88.66 CAD

$106.39 CAD

Brand	CURT
Part #	56236
Condition	New
Warehouse	C

1997 Suzuki Esteem Trailer Wire Converter Hopkins Towing Solution

2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover
Electronic Taillight Converter; 2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover;
Electronic Taillight Converter
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design
- Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
- 90 Day Warranty From The Date Of Original Purchase
Many of today's tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Additional Fitment Information:

Vehicle
1997 - Suzuki Esteem

Brand	Hopkins Towing Solution
Part #	H2248915
Condition	New
Warehouse	B

1996 Suzuki Esteem Trailer Wire Converter Hopkins Towing Solution

2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover; w/4 Wire Flat Extension
Electronic Taillight Converter; 2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover; w/4 Wire Flat Extension;
Electronic Taillight Converter
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- 72 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design
- Includes Dust Cover
- Converter Mounts In Trunk Out Of Harms Way
- Includes Splices And Terminal Grease
- Converter Mounts In Trunk
- 90 Day Warranty From The Date Of Original Purchase
Many of today's tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48925 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Additional Fitment Information:

Vehicle
1996 - Suzuki Esteem

Brand	Hopkins Towing Solution
Part #	H2248925
Condition	New
Warehouse	B

1978 Porsche 911 Trailer Wire Converter Hopkins Towing Solution

Powers 5.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof
Vehicle To Trailer Powered Taillight Converter Kit; Powers 5.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof;
Vehicle To Trailer Powered Taillight Converter Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics From Wiring Shorts
- Includes 14 Ga. Power Lead Wire/Fuse/Fuse Assembly
- Includes Splices And Cable Ties
- Powers Up To 5.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
- 90 Day Warranty From The Date Of Original Purchase
Many of today's vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Additional Fitment Information:

Vehicle
1978 - Porsche 911

Brand	Hopkins Towing Solution
Part #	H2246255
Condition	New
Warehouse	B

1989 Porsche 911 Trailer Wire Converter Hopkins Towing Solution

Powers 8.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof
Vehicle To Trailer Powered Taillight Converter Kit; Powers 8.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof;
Vehicle To Trailer Powered Taillight Converter Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics And Itself From Wiring Shorts
- Self-Resetting
- Includes 12 Ga. Power Lead Wire
- Includes Fuse/Fuse Assembly/Splices/Cable Ties
- Powers Up To 8.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
- 90 Day Warranty From The Date Of Original Purchase
Many of today's vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.

Additional Fitment Information:

Vehicle
1989 - Porsche 911

Brand	Hopkins Towing Solution
Part #	H2246365
Condition	New
Warehouse	B

1995 Ford Explorer Trailer Wire Converter Hopkins Towing Solution

Powers 5.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof Without Towing Package
Vehicle To Trailer Powered Taillight Converter Kit; Powers 5.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof;
Vehicle To Trailer Powered Taillight Converter Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics From Wiring Shorts
- Includes 14 Ga. Power Lead Wire/Fuse/Fuse Assembly
- Includes Splices And Cable Ties
- Powers Up To 5.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
- 90 Day Warranty From The Date Of Original Purchase
Many of today's vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Additional Fitment Information:

Vehicle
1995 - Ford Explorer

Brand	Hopkins Towing Solution
Part #	H2246255
Condition	New
Warehouse	B

1998 Ford Explorer Trailer Wire Converter Hopkins Towing Solution

Powers 8.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof Without Towing Package
Vehicle To Trailer Powered Taillight Converter Kit; Powers 8.0 Amps Per Stop/Turn Signal/Receives Power Direct From Tow Vehicle Battery To Isolate/Protect Electronics/Shortproof;
Vehicle To Trailer Powered Taillight Converter Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics And Itself From Wiring Shorts
- Self-Resetting
- Includes 12 Ga. Power Lead Wire
- Includes Fuse/Fuse Assembly/Splices/Cable Ties
- Powers Up To 8.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
- 90 Day Warranty From The Date Of Original Purchase
Many of today's vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.

Additional Fitment Information:

Vehicle
1998 - Ford Explorer

Brand	Hopkins Towing Solution
Part #	H2246365
Condition	New
Warehouse	B

1998 Mazda B2500 Trailer Wire Converter Hopkins Towing Solution

2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover Without Towing Package
Electronic Taillight Converter; 2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover;
Electronic Taillight Converter
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design
- Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
- 90 Day Warranty From The Date Of Original Purchase
Many of today's tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Additional Fitment Information:

Vehicle
1998 - Mazda B2500

Brand	Hopkins Towing Solution
Part #	H2248915
Condition	New
Warehouse	B

1999 Ford Ranger Trailer Wire Converter Hopkins Towing Solution

2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover; w/4 Wire Flat Extension Without Towing Package
Electronic Taillight Converter; 2.1 Amp Capacity; Compatible with Incandescent Or LED Tow Vehicle Taillight Systems; Includes 4 Wire Flat And Dust Cover; w/4 Wire Flat Extension;
Electronic Taillight Converter
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- 72 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design
- Includes Dust Cover
- Converter Mounts In Trunk Out Of Harms Way
- Includes Splices And Terminal Grease
- Converter Mounts In Trunk
- 90 Day Warranty From The Date Of Original Purchase
Many of today's tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48925 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.