Carburetor Holley Parts

Choose a Year for your vehicle

Showing 1 - 10 of 46 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1976 Chevrolet C10 Carburetor 8 Cyl 7.4L Holley

4 bbl; 870 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.688 in. Throttle Bore; Shiny Finish 1 Timed Spark Vacuum Port; 2 Full/1 PCV Vacuum Port~Down Leg Booster
Street Avenger Carburetor; 4 bbl; 870 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.688 in. Throttle Bore; Shiny Finish;
Street Avenger Carburetor
Product Attributes:
- Primary Main Jet: 78
- Primary Power Valve: 4.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Down Leg
- Vacuum Port Quantity: 1 Timed (spark); 2 Full; 1 Pcv
- CFM: 870
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Usage: Street/hi-performance
- Choke: Electric
- Secondary Main Jet: 82
- Barrel: Four
- Emission: Without Egr
Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Street Avenger carburetors are known to bolt on right out of the box and have great features such as a quick change vacuum secondary for easy fine tuning; optimized street calibrations; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy start ups; built-in fuel filters; and an included fuel line kit so there are no unnecessary trips back to the parts store. The Avenger series are the first carburetors to have a limited lifetime warranty. With a great warranty like that and the included comprehensive instruction manual, you can count on years of worry free service.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1976 - Chevrolet C10	V	-	8 Cyl 7.4L	454

1 In Stock

$1,076.08 CAD

$1,291.30 CAD

Brand	Holley
Part #	H190-80870
Condition	New
Warehouse	B

1969 Buick GS 400 Carburetor 8 Cyl 6.6L Holley

4 bbl; 650 cfm; Model 4175; 2 Circuit Metering; Vacuum Secondary; Electric Choke; Gas; Single Fuel Inlet; 1.375in Throttle Bore; Gold Dichromate Finish Straight Booster
Classic Street Carburetor; 4 bbl; 650 cfm; Model 4175; 2 Circuit Metering; Vacuum Secondary; Electric Choke; Gas; Single Fuel Inlet; 1.375in Throttle Bore; Gold Dichromate Finish;
Classic Street Carburetor
Product Attributes:
- Primary Main Jet: 62
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.375 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 650
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4175
- Fuel Inlet: Single
- Flange: Spread Bore
- Usage: Street/hi-performance
- Choke: Electric
- Billet Color: None
- Barrel: Four
- Emission: Without Egr
- Circuit: 2
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Performance Replacement For Q-Jet Carbs
- Factory Preset Electric Choke For Easy Startups
- For All Weights/Gearing/Transmission For Smooth Open Of Secondaries
- Single Feed Fuel Inlet For Easy Installation
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Do you like the tunability Holleys modular carbs, but need to simply replace a Q-jet? The spread bore bolt pattern of the 0-80555C lets you do just that. It has vacuum secondaries and electric choke, so it is useable on a wide variety of vehicles and its single fuel inlet that is in the standard Q-jet location makes it easy to bolt on. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.***The 0-80555C is a Model 4175 designed to fit GM spread bore passenger car and light truck applications. It is not compatible with Ford or Chrysler Spread bore applications. The 0-80555C is not recommended for any RV applications. The 0-80555C is not designed to pass any emission laws. The 0-80555C is to be used only for competition/off road vehicles or vehicles not required to comply with any exhaust emissions standards. A carburetor spacer could be required to clear certain components on stock applications such as the Mr. Gasket 3406.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1969 - Buick GS 400	V	6555	8 Cyl 6.6L	400

4 In Stock

$1,264.88 CAD

$1,517.86 CAD

Brand	Holley
Part #	H190-80555C
Condition	New
Warehouse	B

Carburetor Holley

Universal

Classic Street Carburetor
Classic Street Carburetor; 4bbl; 390cfm; 2 Circuit Metering; Model 4160; Electric Choke; Vacuum Secondary; Gas; Single Fuel Inlet; 1.438 in. Throttle Bore; Gold Dichromate Finish;
Product Attributes:
- Primary Main Jet: 51
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.438 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 390
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4160
- Fuel Inlet: Single
- Flange: Square Bore
- Usage: Street/hi-performance
- Choke: Electric
- Billet Color: None
- Barrel: Four
- Emission: Without Egr
- Circuit: 2
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Factory Preset Elec Choke For Easy Startups
- For All Weights/Gearing/Transmission For Smooth Open Of Secondaries
- Single Feed Fuel Inlet For Easy Installation
- Power Valve Blow-Out Protection
Classic Holley carbs have been a staple for rodders around the world for decades. They're calibrated for use on stock to mildly modified vehicles and have that classic Holley look. Holleys 0-8007 is calibrated and intended for small V8s or 6 cylinder engines as well as 2x4 street tunnel ram style set ups. Plus, it is Gold Dichromate coated for durability and classic Holley looks. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

5 In Stock

$1,314.66 CAD

$1,577.59 CAD

Brand	Holley
Part #	H190-8007
Condition	New
Warehouse	B

Carburetor Holley

Universal

Performance Race Carburetor
Performance Race Carburetor; 2 bbl; 500 cfm; Model 2300; Manual Choke; Gas; Single Fuel Inlet; 50cc Accelerator Pump; Gold Dichromate Finish;
Product Attributes:
- Primary Main Jet: 73
- Primary Power Valve: 5.0
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Venturii Size: 1.376 In.
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Down Leg
- CFM: 500
- Secondary Type: None
- Supercharged Application: No
- Carburetor Type: 2300
- Fuel Inlet: Single
- Flange: 2bbl/2300
- Usage: Racing
- Choke: None
- Barrel: Two
- Emission: Without Egr
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
The 0-4412C is easily the winningest two barrel carburetor on the market, used for decades in circle track racing around the world. This new 500cfm 0-4412CT carburetor shares the hugely successful features of the original, but with changes aimed directly at circle track cars. The choke assembly has been removed for unobstructed airflow, plus it has been specially calibrated for circle track racing use. It comes out of the box ready to run with less modifying and less tuning at the track!
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

3 In Stock

$1,012.57 CAD

$1,215.08 CAD

Brand	Holley
Part #	H190-4412CT
Condition	New
Warehouse	B

Carburetor Holley

Universal

Street/Strip Carburetor
Street/Strip Carburetor; 4 bbl; 750 cfm; 2 Circuit Metering; Model 4160; Vacuum Secondary; Manual Choke; Gasoline; Dual Fuel Inlet; Zinc; Shiny Finish;
Product Attributes:
- Primary Main Jet: 72
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 750
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4160
- Fuel Inlet: Dual
- Flange: Square Bore
- Usage: Street/strip
- Choke: Manual
- Billet Color: None
- Barrel: Four
- Emission: Without Egr
- Circuit: 2
Features:
- Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Man. Choke Cable Hand Controlled For Cold Start Control
- Vacuum Secondaries For Use On Wide Variety Of Vehicles
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Power Valve Blow Out Protection
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
- Compensates For All Vehicle Weights Gearing/Transmissions
The 0-3310S is a shiny aluminum version of the classic 0-3310 - a hot rod staple for over four decades! Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and manual choke make it amazingly universal. The famed 0-3310 is one of ten inaugural inductees into the Hot Rod Magazine Speed Parts Hall of Fame! Its well known performance calibration and 750 CFM airflow keep it on top still today. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This Part Fits the Following OEM/Substitute Numbers:

1407, 1412, 1912

This item is not specific to any vehicle. Click here to learn more

13 In Stock

$825.55 CAD

$990.66 CAD

Brand	Holley
Part #	H190-3310S
Condition	New
Warehouse	B

Carburetor Holley

Universal

Street HP Carburetor
Street HP Carburetor; 4 bbl; 650 cfm; Model 4150HP; Double Pumper®; Mechanical Secondary; All Aluminum Construction; No Choke; Gasoline; Shiny Finish;
Product Attributes:
- Primary Main Jet: 69
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Venturii Size: 1.250 In.
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 650
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4150
- Flange: Square Bore
- Secondary Pump Nozzle Size: 29
- Usage: Street/hi-performance
- Choke: None
- Secondary Main Jet: 75
- Barrel: Four
- Emission: Without Egr
Features:
- Aluminum Construction For Weight Savings/Long Lasting Looks
- Optimized Calibration For Outstanding Drivability
- Contoured Venturi Inlet Balances Airflow For Increased hp
- Screw In Air Bleeds For Precision Tuning Capabilities
- Four Corner Idle For Precise Idle Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Transmission w/High Stall/Low Gearing
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Tire smoking performance has never been so affordable! The all new Aluminum Street HPs weigh up to 40% less and are even easier on your wallet. Holley is proud to introduce the all new Aluminum Street HP(TM);. They utilize the best features from Holleys Race Bred 4150 HP(TM); carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP(TM); and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used on the 650 and 750 cfm models so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

3 In Stock

$1,155.03 CAD

$1,386.04 CAD

Brand	Holley
Part #	H190-82651SA
Condition	New
Warehouse	B

Carburetor Holley

Universal

Gen 3 Ultra Dominator® HP Race Carburetor
Gen 3 Ultra Dominator® HP Race Carburetor; 4bbl; 1250cfm; 3 CircuitMetering; 1x4 Gas; Model 4500UHP; DualFuelInlet; No Choke; Shiny w/Blk Anodized Metering Blocks/Booster Inserts;
Product Attributes:
- Needle and Seat Size: 120;120
- Primary Main Jet: 92
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Venturii Size: 1.880 In.
- Throttle Bore: 2.125 In.
- CFM: 1250
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4500
- Fuel Inlet: Dual
- Flange: 4500
- Usage: Racing
- Billet Color: Shiny With Black Billet
- Idle Air Bleed Size: 51
- Primary Power Valve: 5.5
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Annular Billet Insert
- Secondary Pump Nozzle Size: 40
- Choke: None
- High Speed Air Bleed: 34
- Intermediate Air Bleed: 70
- Secondary Main Jet: 102
- Barrel: Four
- Emission: Without Egr
- Circuit: 3
Features:
- All Aluminum Construction Saves 3.8 lbs. Over Original Models
- 28% Weight Savings
- Calibrations For Todays Larger Race Engines and New Fuels
- Fully Machined From Venturi Throat To Throttle Bore
- Integrated Idle Bypass Valve Allows For Adjustment Of Idle
- 12 Hole Billet Booster Superior Atomization/Throttle Response
- Metering Blocks Feature Improved True Gasket Sealing
- Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
- Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
- Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
- Drain Plug On Bowl Provides Easy Access To Empty Bowl
- Contoured Hex Head Squirter Screws For Streamlined Airflow
The original Dominator(R) took carburetion to another level in 1969 when it was developed for NASCAR(R) racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new main body, brand new state of the art calibrations, high volume fuel bowls and sizes up to 1475 CFM!The patent pending GEN 3 main body is 5/16 in. taller than the previous generation! This new height allowed for larger radius air entries which were optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into new fully machined, big bore venturii. The main-body also features an integrated idle bypass valve that allows for idle adjustments while maintaining the correct throttle plate to transfer slot relationship as well as an extended air cleaner flange for easy air scoop attachment when using the available air scoop adapter. The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

2 In Stock

$2,823.35 CAD

$3,388.02 CAD

Brand	Holley
Part #	H190-80908BK
Condition	New
Warehouse	B

Carburetor Holley

Universal

Aluminum Double Pumper Carburetor
Aluminum Double Pumper Carburetor; 4 bbl; 750 cfm; Model 4150; Mech. Secondary; Dual Fuel Inlet; Electric Choke; Gasoline; Shiny Finish;
Product Attributes:
- Primary Main Jet: 70
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- Vacuum Port Quantity: 1 Timed (spark); 1 Full; 1 Pcv
- CFM: 750
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Secondary Pump Nozzle Size: 31
- Usage: Street/hi-performance
- Choke: Electric
- Secondary Main Jet: 81
- Barrel: Four
- Emission: Without Egr
Features:
- Shiny Finish For Corrosion Resistance
- Optimized Street/Strip Calibration That Works Out Of The Box
- Electric Choke For Precise Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Transmission w/High Stall/Low Gearing
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley upgraded their two most popular sizes of double pumper with electric chokes. The 650 and 750 CFM models are available in the classic zinc and shiny polished finishes. Holley Double Pumper carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission or an automatic transmission with a high stall and low rear end gears. The Double Pumper is available in a gold dichromate or tumble polished shiny finish and features dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high volume fuel delivery and an electric choke for easy control of engine warm up. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

3 In Stock

$1,191.08 CAD

$1,429.30 CAD

Brand	Holley
Part #	H190-4779SAE
Condition	New
Warehouse	B

Carburetor Holley

Universal

Universal Carburetor
Universal Carburetor; 4 bbl; 450 cfm; Mech. Secondary; Model 4160; No Choke; Square Bore Flange; Gas; Single Fuel Inlet; 1.5 in. Throttle Bore; Gold Dichromate Finish;
Product Attributes:
- Primary Main Jet: 58
- Primary Power Valve: 8.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.500 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 450
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4160
- Fuel Inlet: Single
- Flange: Square Bore
- Usage: Street/hi-performance
- Choke: None
- Barrel: Four
- Emission: Without Egr
Features:
- Universal Holley 4-Barrel Carburetor
The 0-9776 450 CFM mechanical secondary carburetor is designed as a universal performance carburetor for use on tunnel ram applications.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

2 In Stock

$925.04 CAD

$1,110.05 CAD

Brand	Holley
Part #	H190-9776
Condition	New
Warehouse	B

Carburetor Holley

Universal

Street Avenger Carburetor
Street Avenger Carburetor; 2bbl; 350cfm; Model 2300; Electric Choke; Gas; Shiny Finish;
Product Attributes:
- Primary Main Jet: 61
- Primary Power Valve: 8.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- Vacuum Port Quantity: 1 Timed (spark); 1 Pcv Port
- CFM: 350
- Supercharged Application: No
- Carburetor Type: 2300
- Flange: 2bbl/2300
- Usage: Oem
- Choke: Electric
- Emission: Without Egr
- Barrel: Two
Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Built In No Trouble Fuel Inlet Filter
- Provides Precise Fuel Control For End Torque
- Gen Iv No Trouble Power Valve
- Two Vacuum Ports 1 Timed Spark and 1 Pcv
- Limited Lifetime Warranty Defects In Material/Workmanship
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Street Avenger carburetors are known to bolt on right out of the box. The 350 CFM Street Avenger carburetor has great features such as optimized street calibrations; two vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8 in. fuel line connection so there are no unnecessary trips back to the parts store. The Avenger series are the first carburetors to have a limited lifetime warranty. With a great warranty like that and the included comprehensive instruction manual, you can count on years of worry-free service.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.