Lakewood Parts

Choose a Year for your vehicle

Showing 1 - 10 of 15 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1977 Buick Century Suspension Shock Absorber - Front 8 Cyl 5.7L Lakewood

90/10 Series; Front; w/0 in. Lift/Drop Not For Street Use
Street/Strip Drag Shocks; 90/10 Series; Front;
Street/Strip Drag Shocks
Product Attributes:
- Collapsed Length: 8.510 In.
- Shock Stroke: 4.930 In.
- WARNING CA Proposition 65: No
- Extended Length: 13.440 In.
- Compression / Rebound: 90/10
Features:
- Features Twin Tube Construction
- Special Hydraulic Oil Formulation Reduces Foaming
- Multi-stage Valving Provides Greater Stability
- Mounts In OE Locations
- Chrome Plated Piston rod For Long Seal Life
- Limited 90 Day Warranty
The 40100 by Lakewood is a 90/10 front shock used on GM A and G body vehicles. These are designed to provide maxim front to rear weight transfer and have been proven to reduce ETs. Lakewood Industries is the leader in drag race chassis and suspension technology. Using decades of track and laboratory research, Lakewood Industries has developed the most consistent and accurate drag shock on the market today Lakewood drag shocks have been precisely tuned for superior weight transfer that remains consistent pass after pass. Additionally, the multi-stage valving provides more stability and control mid track. 90/10 front shocks and struts are intended for track use only and provide the maximum front to rear weight transfer. Disconnecting the front sway bar is recommended for maximum track performance.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1977 - Buick Century	V	-	Front	8 Cyl 5.7L	350

1 In Stock

$149.13 CAD

$178.96 CAD

Brand	Lakewood
Part #	L1340100
Condition	New
Warehouse	B

1980 Ford Mustang Drive Shaft Loop Lakewood

0.25 in. Thick Zinc Plated Steel; 4 piece Design; Includes Mounting Hardware
Drive Shaft Loop; 0.25 in. Thick Zinc Plated Steel; 4 piece Design; Includes Mounting Hardware;
Drive Shaft Loop
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Custom Bent To Fit
- Made Of Zinc Plated Steel
- 4 Piece Design
- Adjustable For Easy Installation
- Limited 90 Day Warranty
This Lakewood driveshaft safety loop is made from zinc plated steel, is bolt-on and fits 1979-2003 Mustangs. Feel safe and secure with Lakewood drive shaft safety loop in your 1979 to 2003 Mustang. The safety loop is NHRA and IHRA approved. The 4 piece design is made of zinc plated steel. It is adjustable for easy installation and custom bent to fit. Mounting hardware included.

Additional Fitment Information:

Vehicle
1980 - Ford Mustang

1 In Stock

$103.31 CAD

$123.97 CAD

Brand	Lakewood
Part #	L1318017
Condition	New
Warehouse	B

1961 Chevrolet Biscayne Engine Mount - Left 8 Cyl 4.6L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber. Safety interlock design eliminates need for torque straps or cables.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1961 - Chevrolet Biscayne	V	4638	Left	8 Cyl 4.6L	283

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324084
Condition	New
Warehouse	B

1958 Chevrolet Bel Air Engine Mount - Right 8 Cyl 5.7L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber. Safety interlock design eliminates need for torque straps or cables.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1958 - Chevrolet Bel Air	V	5704	Right	8 Cyl 5.7L	348

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324084
Condition	New
Warehouse	B

1964 Chevrolet Chevelle Engine Mount - Left 8 Cyl 5.3L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount~Frame Bracket GM PN[3872815] Is Required For LH Mount Replacement~Frame Bracket GM PN[3872816] Is Required For RH Mount Replacement
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber. Safety interlock design eliminates need for torque straps or cables.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1964 - Chevrolet Chevelle	V	5358	Left	8 Cyl 5.3L	327

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324084
Condition	New
Warehouse	B

1964 Chevrolet Chevelle Engine Mount - Right 8 Cyl 5.3L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount~Frame Bracket GM PN[3872815] Is Required For LH Mount Replacement~Frame Bracket GM PN[3872816] Is Required For RH Mount Replacement
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber. Safety interlock design eliminates need for torque straps or cables.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1964 - Chevrolet Chevelle	V	5358	Right	8 Cyl 5.3L	327

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324084
Condition	New
Warehouse	B

1970 Ford Fairlane Engine Mount - Left 8 Cyl 5.0L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1970 - Ford Fairlane	V	-	Left	8 Cyl 5.0L	302

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324094
Condition	New
Warehouse	B

1968 Ford Falcon Engine Mount - Right 8 Cyl 5.0L Lakewood

Steel/Hard Rubber Do Not Use A Solid Transmission Mount
Muscle Motor Mount; Steel/Hard Rubber;
Muscle Motor Mount
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Without Noise Or Vibration
- Heavy Gauge Steel Frame
- Safety Interlock Design
- No Need For Torque Straps/Cables
- Ideal For Replacing Old Mounts
Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1968 - Ford Falcon	V	-	Right	8 Cyl 5.0L	302

1 In Stock

$86.07 CAD

$103.28 CAD

Brand	Lakewood
Part #	L1324094
Condition	New
Warehouse	B

Transmission Bell Housing Lakewood

Universal

Bellhousing Locating Kit
Bellhousing Locating Kit; 0.625 in. Dia.; GM; Bellhousing Dowel Pin Holes Must Be Enlarged 1/16 in.;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Used To Dial In A Misaligned Register Bore
- Bolted In Position Loosely
Two centerless ground dowel pins replace the stock pins. These Lakewood bellhousing locator dowel pins dial in a misaligned register bore which can cause missed shifts or premature pilot bearing failure. These centerless ground dowel pins replace stock pins and are extra-long for use with block plates.
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more

1 In Stock

$76.49 CAD

$91.79 CAD

Brand	Lakewood
Part #	L1315981
Condition	New
Warehouse	B

Clutch Pivot Ball Lakewood

Universal

Adjustable Clutch Fork Pivot Ball
Adjustable Clutch Fork Pivot Ball; For Use w/Most Chevy/Pontiac/Oldsmobile; Recommended For Use w/Safety Bellhousings; Black Oxide Steel;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Adjustable Pivot Ball
- Black Oxide Steel
- Complete Kit
- Limited 90 Day Warranty
Lakewood clutch pivot ball allows additional adjustment of the clutch fork HeIght. Helps eliminate release problems when installing a high-performance clutch. This black oxide adjustable steel ball is recommended for use with Lakewoods safety bellhousing. This pivot ball fits Chevy, Pontiac, Olds, most applications. Other applications available
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.