Engine Camshaft Follower Original Equipment Parts

Choose a Year for your vehicle

Showing 1 - 10 of 22 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1990 Ford Probe Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

1990 Ford Probe Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1990 - Ford Probe	L	-	4 Cyl 2.2L	133

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1993 Subaru Legacy Engine Camshaft Follower Original Equipment

1993 Subaru Legacy Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle
1993 - Subaru Legacy

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1997 Subaru Legacy Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

1997 Subaru Legacy Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: -05/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID	Prod. Date Range
1997 - Subaru Legacy	H	2212	4 Cyl 2.2L	-	To:05-00-96

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1996 Subaru Legacy Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

1996 Subaru Legacy Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 06/1995-05/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID	Prod. Date Range
1996 - Subaru Legacy	H	2212	4 Cyl 2.2L	Outback	-	Fr:06-00-95 To:05-00-96

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1995 Subaru Legacy Engine Camshaft Follower Original Equipment

1995 Subaru Legacy Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 03/1994-, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Prod. Date Range
1995 - Subaru Legacy	Fr:03-00-94

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1996 Subaru Impreza Engine Camshaft Follower Original Equipment

1996 Subaru Impreza Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: -06/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Sub Model	Prod. Date Range
1996 - Subaru Impreza	LX	To:06-00-96

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1996 Subaru Impreza Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 07/1995-06/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Sub Model	Prod. Date Range
1996 - Subaru Impreza	Outback	Fr:07-00-95 To:06-00-96

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1993 Subaru Impreza Engine Camshaft Follower Original Equipment

1993 Subaru Impreza Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 11/1992-, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Sub Model	Prod. Date Range
1993 - Subaru Impreza	LS	Fr:11-00-92

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1995 Subaru Impreza Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

1995 Subaru Impreza Engine Camshaft Follower 4 Cyl 2.2L Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 08/1994-, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID	Prod. Date Range
1995 - Subaru Impreza	H	2212	4 Cyl 2.2L	L	AWD	-	Fr:08-00-94

6 In Stock

$28.34 CAD

$34.01 CAD

Brand	Original Equipment
Part #	OEA1633775
Condition	New
Warehouse	A

1995 Mitsubishi Diamante Engine Camshaft Follower Original Equipment

1995 Mitsubishi Diamante Engine Camshaft Follower Original Equipment

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.

Additional Fitment Information: