Tick Image
Position: See All | Heater Hose | Heater Inlet | Heater Outlet
Engine: See All 2.2L L4 | 4.3L V6
Found 3 items on 1 pages. Viewing page 1 of 1
Sort by :

Dayco 80400 Molded Coolant Hose
Part Number: 80400 Manufacturer:  Dayco
stars
Sale Price:
$13.37 CAD
List Price:
$14.71
Save:
$1.34 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

FREE SHIPPING on order over $100 CAD

Product Details

Product Notes:
HVAC Heater Hose
90 Degree Coolant Hose
"Dayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40?F (-40?C) to +257?F (+125?C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. DaycoÆs Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684."
90? Molded Coolant Hose;Curved
Position:
Heater Hose
Weight:
0.18 lb.
Package Size:
4.50 x 0.63 x 6.00 inches
UPC:
38244148035
Product Features:
  • 6-inch by-pass hose
  • Heavy duty construction holds up against road debris, coolants, salt and temperature variations
  • Burst resistance guarantee for the life of the hose
  • Reinforced with knitted rayon for maximum strength and burst resistance
  • Meets or exceeds OEM (Original Equipment Manufacturer) requirements
This Product Fits:
  Vehicle Engine Base                                            
  1997 GMC Sonoma 2.2L L4                                            
Dayco 88389 Small Id Hose
Part Number: 88389 Manufacturer:  Dayco
stars
Sale Price:
$34.39 CAD
List Price:
$37.83
Save:
$3.44 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

FREE SHIPPING on order over $100 CAD

Product Details

Product Notes:
HVAC Heater Hose
Molded Heater Hose
"Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1"" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40?F (-40?C) to +257?F (+125?C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ôquick connectö end, DaycoÆs Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation."
Small I.D. Heater Hose
Position:
Heater Inlet
Weight:
0.60 lb.
Package Size:
7.00 x 0.75 x 17.50 inches
UPC:
38244726783
Product Features:
  • Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
  • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
  • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
  • Limited Three Year Warranty
This Product Fits:
  Vehicle Engine Base                                            
  1997 GMC Sonoma 4.3L V6                                            
Dayco 87739 Heater Hose
Part Number: 87739 Manufacturer:  Dayco
stars
Sale Price:
$39.76 CAD
List Price:
$43.74
Save:
$3.98 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

FREE SHIPPING on order over $100 CAD

Product Details

Product Notes:
HVAC Heater Hose
Molded Heater Hose
"Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1"" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40?F (-40?C) to +257?F (+125?C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ôquick connectö end, DaycoÆs Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation."
Small I.D. Heater Hose
Position:
Heater Outlet
Weight:
0.58 lb.
Package Size:
11.00 x 0.63 x 13.50 inches
UPC:
38244721160
Product Features:
  • Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
  • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
  • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
  • Limited Three Year Warranty
This Product Fits:
  Vehicle Engine Base                                            
  1997 GMC Sonoma 4.3L V6                                            
Found 3 items on 1 pages. Viewing page 1 of 1
Sort by :

1997 GMC Sonoma Hvac Heater Hose