Need help? 
or  Email US
Tick Image
Engine: See All 6.3L V8 | 7.0L V8 | 7.2L V8
Found 7 items on 1 pages. Viewing page 1 of 1
Sort by :

stars
Sale Price:
$579.74 CAD
List Price:
$637.71
Save:
$57.97 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
4 bbl; 750cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve. Adpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Performance~Electric Choke PN1478 Can Be Added If Needed~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible
  • CARB PERF 750 CFM MANUAL SATIN
  • CARB PERF 750 CFM MANUAL SATIN
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Designed/Calibrated For Optimum Street Performance
  • Match With A Variety of Manifolds
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Made In The U.S.A.
  • CARBURETOR
  • The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets - Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
  • CARBURETOR
Brand Description:
Edelbrock is a specialty performance automotive and motorcycle aftermarket parts manufacturer focusing on increased performance.
Weight:
8.90 lb.
Package Size:
7.38 x 6.75 x 13.25 inches
UPC:
00085347014071
Product Features:
  • Primary venturi booster is a bottom feed design for smoother acceleration and better drivability
  • Single feed fuel inlet with air valve secondary type
  • Shiny silver finish and calibrated for gasoline
  • Manual choke with 4-barrel square bore carburetor flange
  • Backed by Edelbrock's exclusive 90 day warranty
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base VIN                                          
  1967 Plymouth Satellite 6.3L V8 7.0L V8 7.2L V8 H                                          
stars
Sale Price:
$649.00 CAD
List Price:
$713.90
Save:
$64.90 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
4 bbl; 750cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve. Adpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Fuel Economy With Performance~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible
  • CARB PERF 750 CFM ELECTRIC SATIN
  • CARB PERF 750 CFM ELECTRIC SATIN
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Designed For Stock To Performer Lever Engines
  • Match With A Variety of Manifolds
  • Made In The U.S.A.
  • CARBURETOR
  • CARBURETOR
  • The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY WITH PERFORMANCE) Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds or other brands of similar design, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Provides excellent fuel economy when used on 454 c.i.d. Chevy and 460 c.i.d. Ford with Performer manifold. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .110, Secondary .107; Metering Rods - .075 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
Brand Description:
Edelbrock is a specialty performance automotive and motorcycle aftermarket parts manufacturer focusing on increased performance.
Weight:
9.20 lb.
Package Size:
7.38 x 6.75 x 13.25 inches
UPC:
00085347014118
Installation Instructions:
Product Features:
  • Primary venturi booster is a bottom feed design for smoother acceleration and better drivability
  • Single feed fuel inlet with air valve secondary type
  • Shiny silver finish and calibrated for gasoline
  • Electric choke with 4-barrel square bore carburetor flange
  • Backed by Edelbrock's exclusive 90 day warranty
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base VIN                                          
  1967 Plymouth Satellite 6.3L V8 7.0L V8 7.2L V8 H                                          
Edelbrock 14073 Carburetor with Manual Choke
Part Number: 14073 Manufacturer:  Edelbrock
stars
Sale Price:
$663.44 CAD
List Price:
$729.78
Save:
$66.34 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
4 bbl; 750cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve. Adpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Performance~Electric Choke PN1478 Can Be Added If Needed~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Universal Throttle Linkage Type; Black Powdercoat; Non-EGR Compatible
  • CARB PERF 750 CFM MANUAL BLACK
  • CARB PERF 750 CFM MANUAL BLACK
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Designed/Calibrated For Optimum Street Performance
  • Match With A Variety of Manifolds
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Made In The U.S.A.
  • CARBURETOR
  • The Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 14073 Performer Series 750 CFM manual choke black powder coated carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets - Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
  • CARBURETOR
Brand Description:
Edelbrock is a specialty performance automotive and motorcycle aftermarket parts manufacturer focusing on increased performance.
Weight:
58.00 lb.
Package Size:
13.69 x 13.44 x 22.38 inches
UPC:
30085347014959
Product Features:
  • Edelbrock carburetors bolt on and run right out of the box
  • Once tuned, the Edelbrock Performer Series of carburetors stays tuned for consistent performance and calibration
  • All-aluminum body is light weight and warp resistant
  • Compatible with gas and blended fuels
  • Two-piece design means no gaskets below the fuel level promising leak-free operation
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base VIN                                          
  1967 Plymouth Satellite 6.3L V8 7.0L V8 7.2L V8 H                                          
Edelbrock 1412 800 CFM Manual Choke Carburetor
Part Number: 1412 Manufacturer:  Edelbrock
stars
Sale Price:
$679.81 CAD
List Price:
$747.79
Save:
$67.98 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
4 bbl; 800cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve. Adpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Performance~Electric Choke PN1478 Can Be Added If Needed~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible
  • CARB PERF 800 CFM MANUAL SATIN
  • CARB PERF 800 CFM MANUAL SATIN
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • High Capacity Accelerator Pump
  • Improved Primary And Secondary Cluster Design
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Designed/Calibrated For Optimum Street Performance
  • Match With A Variety of Manifolds
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Made In The U.S.A.
  • CARBURETOR
  • The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package. Features include a high-capacity accelerator pump and an improved primary and secondary cluster design. EPS 800 has the same superior features as the rest of the Performer Series line such as out-of-the-box performance and 2-piece design. Comes with: Metering Jets - Primary .113, Secondary .101; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
  • CARBURETOR
Brand Description:
Edelbrock is a specialty performance automotive and motorcycle aftermarket parts manufacturer focusing on increased performance.
Weight:
8.90 lb.
Package Size:
7.38 x 6.75 x 13.25 inches
UPC:
00085347014125
Installation Instructions:
Product Features:
  • Designed and calibrated for serious street high-performance engines
  • Easy to adjust, out-of-the-box performance with no 'failure-prone' power valves
  • Well equipped with a high-capacity accelerator pump and high-lift boosters
  • No plastic parts to break and no power valves to blow out
  • Comes with 113 primary metering jets, 101 secondary metering jets and 0
  • 071 x 0
  • 047 metering rods
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base VIN                                          
  1967 Plymouth Satellite 6.3L V8 7.0L V8 7.2L V8 H                                          
stars
Sale Price:
$729.42 CAD
List Price:
$802.36
Save:
$72.94 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
4 bbl; 800cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve. Adpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Performance~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible
  • The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1413 Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package. Features include a high-capacity accelerator pump and an improved primary and secondary cluster design. EPS 800 has the same superior features as the rest of the Performer Series line such as out-of-the-box performance and 2-piece design. Comes with: Metering Jets - Primary .113, Secondary .101; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
  • Match With A Variety of Manifolds
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Bolts On And Runs Right Out of The Box
  • Made In The U.S.A.
  • CARBURETOR
  • CARB PERF 800 CFM ELECTRIC SATIN
  • CARB PERF 800 CFM ELECTRIC SATIN
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels/Adjustments Are Rarely Needed
  • High Capacity Accelerator Pump
  • Improved Primary And Secondary Cluster Design
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Designed/Calibrated For Optimum Street Performance
  • CARBURETOR
Brand Description:
Edelbrock is a specialty performance automotive and motorcycle aftermarket parts manufacturer focusing on increased performance.
Weight:
9.30 lb.
Package Size:
7.38 x 6.75 x 13.25 inches
UPC:
00085347014132
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base VIN                                          
  1967 Plymouth Satellite 6.3L V8 7.0L V8 7.2L V8 H                                          
stars
Sale Price:
$957.76 CAD
List Price:
$1,053.54
Save:
$95.78 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
  • Prem Street Carbs (Avengers)
  • 4150 770CFM V-SEC/EC S-AVENGER
  • Holley Prem Street Carbs (Avengers)
  • Holley-4150 770CFM V-SEC/EC S-AVENGER
  • Prem Street Carbs
  • Carburetor
Brand Description:
Holley has been the leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion.
Weight:
14.88 lb.
Package Size:
12.50 x 7.38 x 11.00 inches
UPC:
090127539118
Installation Instructions:
Product Features:
  • Adjustable Vacuum Secondary
  • 4th Generation Power Valve
  • Fuel Metering System
  • Built-In Secondary Fuel Filters
  • External Float Adjustable w/Sight Plug
  • On Vehicle Electric Choke
  • 4 Vacuum Ports
  • Street Ready; Out Of The Box
  • Needle and seat design eliminates external float level adjustment
  • Dual feed fuel inlet with vacuum secondary type
  • Silver finish with built-in secondary fuel filters
  • Includes vacuum for PCV, EGR, power brakes, distributor, air cleaner, and canister
  • Power valve blow-out protection adds trouble free operation
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base                                            
  1967 Plymouth Satellite 7.0L V8 7.2L V8                                            
stars
Sale Price:
$957.76 CAD
List Price:
$1,053.54
Save:
$95.78 (10 %)
Qty:
In Stock
Ships from our Canadian Based Warehouses

In Stock

Leaves Warehouse Today

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
  • Prem Street Carbs (Avengers)
  • 770 CFM ALUM STREET AVENGER E/C
  • Holley Prem Street Carbs (Avengers)
  • Holley-770 CFM ALUM STREET AVENGER E/C
  • Prem Street Carbs
  • Carburetor
Brand Description:
Holley has been the leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion.
Weight:
10.20 lb.
Package Size:
12.50 x 7.38 x 11.00 inches
UPC:
090127662557
Product Features:
  • Adjustable Vacuum Secondary
  • 4th Generation Power Valve
  • Fuel Metering System
  • Built-In Secondary Fuel Filters
  • External Float Adjustable w/Sight Plug
  • On Vehicle Electric Choke
  • 4 Vacuum Ports
  • Street Ready; Out Of The Box
  • Adjustable vacuum secondary with a 4th generation power valve
  • Fuel metering system
  • Built-in secondary fuel filters
  • External float adjustable with sight plug
  • On vehicle electric choke
Speak to a Live Mechanic - powered by JustAnswers
This Product Fits:
  Vehicle Engine Base                                            
  1967 Plymouth Satellite 7.2L V8                                            
Found 7 items on 1 pages. Viewing page 1 of 1
Sort by :

1967 Plymouth Satellite Carburetor