Shop By Product Matching "Crown"

Choose a Make for your 1984 vehicle

Chevrolet Dodge Ford GMC Isuzu Jeep Mazda Mitsubishi Nissan Toyota

Showing 1 - 10 of 964 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1984 Ford LTD Trailer Hitch - Rear 8 Cyl 5.8L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Ford; Lincoln; Mercury Sedans
4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
CURT 13707 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford; Lincoln; Mercury Sedans
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Country Squire, Ford Crown Victoria, Lincoln Mark VI, Lincoln Town Car, Mercury Grand Marquis and Mercury Marauder (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	Engine Version	CID
1984 - Ford LTD	V	5753	Rear	8 Cyl 5.8L	Crown Victoria	Windsor	351

1 In Stock

$382.14 CAD

$458.57 CAD

Brand	CURT
Part #	13707
Condition	New
Warehouse	C

1984 Ford LTD Engine Oil Filter 8 Cyl 5.8L K&N

Oil Filter
H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 With Engine Oil Cooler Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine Version	CID
1984 - Ford LTD	V	5753	8 Cyl 5.8L	Crown Victoria	Windsor	351

53 In Stock

$24.08 CAD

$28.90 CAD

Brand	K&N
Part #	K33HP-2004
Condition	New
Warehouse	B

1984 Ford LTD Windshield Wiper Blade - Front Anco

ANCO Beam Contour Wiper Blade 18
ANCO Contour Wiper Blade (Pack of 1)
Contour
Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
- Blade Material: Duraklear Plus - Natural Rubber
- Frame Material: Steel; Plastic; Rubber
- Blade Type: Beam
- Refillable: No
This profile blade gives you reliable premium all-season performance.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

16-180, 25-180, 418A, 418B, 601843, DLF18, U-18

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Front	Crown Victoria

43 In Stock

$19.41 CAD

$23.29 CAD

Brand	Anco
Part #	A19C-18-UB
Condition	New
Warehouse	B

UPC: 37577094132

1984 Ford LTD Power Steering Pump Pulley Dorman

Power Steering Pump Pulley
w/Air Conditioning
Product Attributes:
- Groove Quantity: 6
- Pulley Bore: 0.689
- Mounting Hardware Included: No
- Package Contents: Pulley
- Outside Diameter: 5.813
- Item Grade: Regular
- Installation Instructions Included: No
- Belt Type: Serpentine
Features:
- Direct replacement - this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality - reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

This Part Fits the Following OEM/Substitute Numbers:

┬á3P25140┬á, D9AZ3A733A, E57Y3A733A, YF1Z3A733AA

Additional Fitment Information:

Vehicle	Sub Model
1984 - Ford LTD	Crown Victoria

2 In Stock

$60.56 CAD

$72.67 CAD

Brand	Dorman
Part #	D18300-003
Condition	New
Warehouse	B

1984 Ford LTD Shock Absorber - Front Monroe

Monro-Matic Plus Shock Absorber
without Police Package
Monroe Shocks & Struts Monro-Matic Plus 32066 Shock Absorber
Monroe Monro-Matic Plus Shock Absorber
Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

12322219, 1440005, 22003121, 22003254, 22046423, 22046424, 22046426, 22046427, 22046428, 22046445, 22046455, 22046456, 22046498, 22063940, 22063941, 22064006, 22064007, 22064040...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Front	Crown Victoria

13 In Stock

$44.82 CAD

$53.78 CAD

Brand	Monroe
Part #	M4532066
Condition	New
Warehouse	B

UPC: 048598024084

1984 Ford LTD Suspension Control Arm and Ball Joint Assembly - Front Right Lower Dorman

Suspension Control Arm
Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Light
- Ball Joint Mounting Type: Press In
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material: Rubber
- Ball Joint Installed: Yes
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

This Part Fits the Following OEM/Substitute Numbers:

2605334, 507-1153, 622.6107, 622.61070, 623.6107, 623.61070, CA494B, CB40048, CB85064, CB85064PR, CK80393, CMK80393, E0AZ3078B, F1VY3078A, F7AZ3078CA, F8VZ3078CA, F8VZ3078R, FA4206...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Front Right Lower	Crown Victoria

3 In Stock

$183.08 CAD

$219.70 CAD

Brand	Dorman
Part #	D18520-208
Condition	New
Warehouse	B

1984 Ford LTD Shock Absorber - Front KYB

High Pressure Monotube Gas Shock
Monotube Performance Upgrade (Excludes Police Car and Taxi)
Gas-a-just
Product Attributes:
- Feature and Benefit 5: Fluid Leaking Can Be A Cause Of Shock Failure, The Kyb Gas-a-just Has An Ultra-smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- Feature and Benefit 4: High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Feature and Benefit 7: Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The Kyb Gas-a-just Helps Keep Electronic Safety Systems Performing As Designed.
- Upper Mount Type: S1
- Feature and Benefit 6: The Higher Gas Pressure Of The Kyb Gas-a-just Responds Quickly To Improve Steering Response
- Compressed Length: 9.65
- Dust Cover Included: N
- Feature and Benefit 1: Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- B-stop: N
- Feature and Benefit 3: Gas-a-just Monotubes Include Additional Damping Over Oe Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- Feature and Benefit 2: Components And Valving Designed Specifically For Classic Cars
- Lower Mount Type: E3(51.6x82x20)
- R-stop: Y
- Extended Length: 14.57
- Stroke Length: 4.92
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

5906, 69675

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Front	Crown Victoria

Brand	KYB
Part #	K11KG4515
Condition	New
Warehouse	B

UPC: 781552000693

1984 Ford LTD Shock Absorber - Front Monroe

OESpectrum Shock Absorber
Recommended OE Application -Specific Replacement without Police Package
Monroe Shocks & Struts OESpectrum 5801 Shock Absorber
Monroe OESpectrum Passenger Car Shock Absorber
Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Lifetime Warranty and Feel the Difference™ Guarantee.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

12322219, 22003121, 22003254, 22046423, 22046424, 22046426, 22046427, 22046428, 22046445, 22046498, 22064040, 22064041, 22064042, 22064043, 22064044, 22064045, 22064046, 22064047...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Front	Crown Victoria

Brand	Monroe
Part #	M455801
Condition	New
Warehouse	B

UPC: 048598040008

1984 Ford LTD Steering Tie Rod End - Outer Moog

Tie Rod End
MOOG ES3495 Tie Rod End
Product Attributes:
- Dust Boot Included: Yes
- End 1 Thread Direction: Counterclockwise
- End 2 Thread Direction: Counterclockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 4.200
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Sub Model
1984 - Ford LTD	Outer	Crown Victoria

Brand	Moog
Part #	M12ES3495
Condition	New
Warehouse	B

UPC: 080066298382

1984 Ford LTD Steering Tie Rod End - Outer Moog

Tie Rod End
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG ES3495 Tie Rod End
Product Attributes:
- Dust Boot Included: Yes
- End 1 Thread Direction: Counterclockwise
- End 2 Thread Direction: Counterclockwise
- End 1 Gender: Male
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- Length - Stud Center to End: 4.200
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

269-2464, 269-2465, 269-2969, 2W7Z3A130A, 2W7Z3A130AA, 401-1210, 401-1210B, 401-1632, 4011632B, 4011633, 45A0210, 45A0632, 46A0210A, 46A0632A, 531-239, 612.61123, D9AZ-3A130A, ES2057L...VIEW MORE

Additional Fitment Information: