Vehicle
Vehicle
The Largest Auto Parts Store in Canada
About us
Feedback
Retrieve Quote
usa ca
Menu
Feedback Retrieve Quote
Account 0 Cart Garage
CA
Select a vehicle to find exact fit parts
Back to vehicles list
Hello, Log In My Account
0 Shopping Cart $0.00

2004 GMC Jimmy Engine Oil Cooler Hose Assembly - Inlet and Outlet Assembly To Remote Oil Filter Dorman

4 on 33 ratings
  • Features:
    • Ideal replacement - this engine oil cooler hose assembly is a direct replacement for the original hose assembly
    • Quality materials - this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
    • Easy to install - no special tools required
    • Quality tested - rigorous quality control ensure this hose assembly conforms to product standards
  • This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.
This Part Fits the Following OEM/Substitute Numbers:
15194579, 15730171, 15760334, 5801012, B64220, SK625001

Additional Fitment Information:
Vehicle Position Drive Type
2004 GMC Jimmy Inlet and Outlet Assembly To Remote Oil Filter 4WD
4 In Stock
Best Price:

$108.53 CAD
$130.24 CAD
Brand Dorman
Part # D18625-001
Condition New
Warehouse B
Dorman

Jimmy Dorman Engine Oil Cooler Hose Assembly 625-001 2004 GMC
  • Engine Oil Cooler Line
    • Dorman Products is one of the most versatile, innovative and interesting manufacturers in the automotive aftermarket as their strength comes in providing the auto parts and equipment that you need, are hard to find, or otherwise previously known as "dealer only". Dorman specializes in the a lot of the basic parts and tools any mechanic or do-it-yourselfer needs, like screws and bolts of all styles and shapes, including specialty automotive parts. Dorman also focuses on providing original equipment replicated parts that strictly adhere to OEM specifications, but usually go to improve durability and/or performance by using better materials or enhancing design. For nearly 100 years Dorman has been filling the needs of the auto parts world.
    Featuring Dorman hydraulic brake hoses, parking brake cables, door mirrors and door handles, brake master cylinders, window motors and window regulators, control arm and ball joint assemblies, drum brake wheel cylinders, wheel lugs, disc brake hardware kits, cooling fans, intake and exhaust manifolds, fuel tanks, and so much more!

    General

    End 2 Type
    Block Connector
    Package Contents
    Oil Cooler Line
    Length
    41
    End 1 Type
    Block Connector

    Packaging

    package quantity
    1
    weight
    1.19 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. James Zaremba
      19 Apr, 2015
      This is the 2nd oil cooler line for my Blazer in 3 years. It started dripping at the crimp. I don't know if the GM/AC Delco part would be any better. Only takes about an hour to install. Make sure the sealing washers are in the bag when it arrives.
    2. brian todd
      30 Mar, 2015
      Great price fast shipping thanks
    3. joseph r. wolf
      15 Mar, 2015
      RIGHT PART, RIGHT PRICE, HIGHLY RECOMMEND.
    4. Andre
      08 Mar, 2015
      It works well. Drove 2000mi now with it. Very easy to install. I kept the old One in cause it. was clamped.
    5. Diego Castellon
      02 Mar, 2015
      excellent product, perfect fit
    6. sgt. rock
      23 Feb, 2015
      fits perfect
    7. Shawn MacAnanny
      11 Jan, 2015
      This line fit great and had all orings and clip. The only issue i had was where the brack bolted to the block behind the alternator. I had to grind the corner of the bracket off with a dremel so it would fit closer. Definitely a great deal though and very well made. I purchased both of the necessary lines. Both fit, no leaks at all, just be sure to clean the oil thermostat very good
    8. josh
      09 Jan, 2015
      It will be nice not to have oil spots on my driveway as well as not to worry about my oil level. Several friends have lost their engines after running out of oil because of leaking oil cooler lines.
    9. R. Holen
      04 Jan, 2015
      Arrived on time and was just what I needed. Easy to install and fit perfectly. Be careful when installing these hoses, make sure you don't break the mounting screws and make sure you lubricate the o-rings when installing. Would recommend.
    10. D. Jones
      16 Dec, 2014
      It's a good quality replacement part BUT after a few months the "o" rings start to let a little oil seep past them. The orginally motorcraft part didn't lead a drop until it failed.
    11. Bob
      16 Dec, 2014
      Fits like the original
    12. C. Sulto
      08 Dec, 2014
      Good quality line. The rubber/synthetic part of these does not last forever (my 2nd replacement over 373k miles) but its good quality for a modest price oil line replacement.
    13. toniatmc1
      28 Nov, 2014
      fast shipping works great
    14. Aaron
      12 Nov, 2014
      Part fit as expected.
    15. James
      15 Apr, 2014
      For my 1994 GMC Jimmy SLE (Also fit's Chevy Blazer, OLDS Bravada same year & Most 1988 - 1994 ) this is just what I need to replace a worn out leaking OEM leaking line; This fit's between the radiator and the fender mounted assembly for Oil filter these model's (there is another line set that fits from oil filter fender housing to engine) ; I am thoroughly satisfied with my purchase and my non-leaking part, It even came with the "O" ring's for radiator end, & metal/neoprene gasket "filter fender housing" end. Installation Note: When installing this part FIRST fasten the oil filter end to housing completely 1st -Then fasten radiator end 2nd ; doing so will allow you to maneuver each of the hoses into place radiator end fitting proper with less likelihood of damage to "O" rings. If you do radiator end (like I did) first - you will have great difficulty trying to attach oil filter end and end up re disconnecting radiator end (resulting in need of...
    16. Gerard Carbone
      03 Feb, 2014
      Quality part exact fit. The way the oil flows through the pipe is smooth and viscous! The micro particle smelting process helps the oil flow without turbulence. It keeps your turbo loobed!
    17. Adam Caldwell Jenkins
      11 Nov, 2013
      I bought this hose and the mating hose (Dorman 625-149). This hose came with a replacement quick disconnect retaining clip which must be replaced when a new hose is installed - the mating hose did not. This review is to serve as notice to potential buyers that this part may show up on your door step without a clip required for installation. You could take a chance and reuse the old clip, but if it fails you could destroy your engine due to loss of engine oil.The parts stores sell replacement clips to the tune of $13 for a package. You can go to the GM dealer and get a new fitting (GM part number 15043741) and plastic locking cap (which did come on the hose - GM part number 15052228) for about $17 which is what I did in the interest of time to get my vehicle back in service.Learn from me - carefully inspect the package and see if it has a clip before you open it. This hose was the exact same price at the local auto parts chain; however, I chose to order...
    18. Alexis Graham
      30 Aug, 2013
      The original oil cooler lines on s-10 blazer are notoriously bad. This was great replacement for them. The material is a much better construction, and the fittings are sound and strong. Used on a 95 s-10 blazer 4x4 v6
    19. Scott Peper
      04 Aug, 2013
      Installed on 95 Volvo 850 turbo. Line was all inclusive including seals and quick install clamp. Length and bends fine. However, tube insert length at oil thermostat housing was about 3/16 linger than stock. Used belt sander to shorten to same length as original. Also o-ring for thermostat end was too big. Bought proper size o-ring and everything went fine.For the price compared to Volvo part is great. Will see how it hold up over time.
    20. Jerree "Jerree"
      02 Jul, 2013
      great product! works with my 1996 suburban c1500, LT, 4L60, 2WD (4x2), 5.7 FI engine. Have after market radiator, heavy duty type. Engine stays cool, cool, cool in blistering hot summer weather.
    21. the1copperhead
      30 May, 2013
      I have a unique 1997 F-150 4.6L with the remote mounted oil filter configuration. Even thought I can't find any documentation that says this year and engine size combination was available back then, I know It came stock from the factory this way. The oil lines going to the filter started to leak. This replacement oil line from Dorman fit perfect. This part also has the sensing port for the pressure sender, which I needed for this vehicle.
    22. Vincent
      05 Aug, 2012
      This cooler hose is a not like installing the 625-104.this installation takes alot of time working in your garage.it took me 4 hrs to install.vehicle has to be lifted up and jack stands used.my vehicle is 4 wheel drive so its a task.have patience.if you have a 2 wheel drive its much easier.good luck
    23. Vincent
      05 Aug, 2012
      It takes about an hour to replace.its much easier if you remove the air intake hose mounted next to the radiator.the fittings are much more accessable.make sure you remove old o rings from radiator.be careful installing new o rings they can go in crooked.be sure to remove gaskets at oil filter housing.
    24. Ammo Guy
      23 Apr, 2012
      Fits like the OEM line.The thing I like... NO MORE OIL LEAKS! :oWoo Hoo!Ammo Guy 8-)Aim small, miss small.
    25. buddy
      27 Mar, 2012
      these lines are great they fit exach as the old ones not a easy install but if you take your time it will take you about a hour im handicap so it took me two well made
    26. mnorris
      22 Feb, 2012
      The Dorman 625-201 oil cooler line is exactly what i needed. I have a 4.6L v8 ford with a remote oil cooler mounted to the frame (why i have no clue) after the stock hose line crimp started leaking i bought this replacement, So far no leaks and everything is dry as a bone. Installation is a bit tuff but with enought patience it can easily be accomplished.
    27. S. Allen
      01 Jan, 2012
      great price, fast shipping and above all they fit, which is probably most important due to bends in the line would buy them again but hope I don't have to.
    28. Smithsonite
      24 Oct, 2011
      Not much to say - they're new. Installed on a '00 GMC Jimmy engine that went into a '89 S10 Blazer. Yes - they fit right on the '00 engine! The real test will be a few seasons of heat, vibration, & 100°+ temperature variations. Came with only one side covered in protective loom, so I grabbed a section off a junk I have here & did the other side as well. With such a critical part to the life of the engine, I don't want to take any chances with abrasion. The price was right, but they are made in China .... just so you know. Time will tell if I made the right choice here.**UPDATE 2/18/2013**5 years was wishful thinking. Leaks near the filter after just one year of use. Not bad enough to warrant a replacement ... but if I had to do this again, I'd have found a better quality (read: NOT made in China) replacement. Be aware ...
    29. AJ
      25 Aug, 2010
      Bought this for my 97 Suburban, as these lines seem to be a consumable on these vehicles. This is the 3rd line going on a vehicle with 150K miles. Fit is exactly as intended and will find out how long this one lasts. Guess it must be a poor design as I have had to change these lines on several trucks. They usually leak where the aluminum is crimped on the rubber line.Have found that replacing the gasket under the oil filter adaptor may also be in your future if you are looking for these oil lines.
    30. Dennisjl
      03 Jul, 2010
      I purchased this online because the local auto stores wanted $50-79 for this hose assembly. It works as it should, shipment was fairly quick, but the packaging...all I could do when it arrived was chuckle, I could fit SIX mid tower computer cases plus a small child in the box that it arrived in.
    31. tekuniversity "BA"
      20 May, 2010
      At first when I was ordering these oil cooler parts I was skeptical that the parts would not fit my truck, or maybe they would be the wrong parts. The price seemed to be too good, but I took the gamble anyhow. They came in a box that was slightly too small, so part of the oil cooler was sticking out of corner the box. Fortunately there was no visible damage to the part. The good news is that everything was exactly like the old parts, nothing was odd or misfit...they fit perfect. The oil cooler lines have been installed about a month and look like a factory installed job.
    32. R. Yager "Lifonedg"
      21 Sep, 2008
      These oil cooler lines were a great buy. Dorman supplies new seals and the snap rings to hold ends into radiator fittings, BUT, I had to give the metal lines on the curved end that bolt onto the filter assembly a little twist to get things to fit just right otherwise the holes wouldn't line up. A vise and a little care taken to prevent putting kinks in the metal lines, and they fit just fine. They're also worth waiting the day or two it took to get here. I'll buy these again.
    33. "Jensen Jensen"
      26 Jun, 2008
      Have replaced this hose twice already. This is the third replacement. Seem to last about 6 months before starting to leak again. Also need to check my installation method.

    Loading...