2013 Audi A4 allroad Brake Parts


Showing 1 - 10 of 122 products
Image
SKU
Product
Rating
Price

Raybestos
  • R-Line
  • Product Attributes:
    • Overall Height:
      • 2.047
      • 52.000
    • Salability Restrictions: No
    • Mounting Bolt Hole Diameter:
      • 0.595
      • 15.100
    • Conventional Or Drum-In-Hat Type Rotor: Conventional
    • Harmonize Code: 8708.30.5030
    • Inside Diameter:
      • 189.000
      • 7.440
    • Center Hole Diameter:
      • 2.677
      • 68.000
    • Stud/Lug Hole Quantity: 5
    • Solid Or Vented Type Rotor: Vented
    • Nominal Thickness:
      • 1.177
      • 29.900
    • Surface Type: Smooth
    • Outside Diameter:
      • 12.591
      • 319.800
    • Mounting Bolt Hole Quantity: 5
    • Discard Thickness:
      • 1.102
      • 28.000
    • UNSPSC Code: 25171715
    • Mounting Bolt Hole Circle Diameter:
      • 112.000
      • 4.409
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
  • Sold Each. Purchase quantity 1 for 1 wheel

This Part Fits the Following OEM/Substitute Numbers:
120.33123, 121.33123, 125.33123, 125.33123CRY, 126.33123CSL, 126.33123CSR, 126.33123SL, 126.33123SR, 127.33123CL, 127.33123CR, 127.33123L, 127.33123R, 128.33123CL, 128.33123CR, 128.33123L, 128.33123R, 14-34406, 14011490...VIEW MORE

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front

Raybestos
  • R-Line
  • Product Attributes:
    • Overall Height:
      • 1.429
      • 36.300
    • Salability Restrictions: No
    • Mounting Bolt Hole Diameter:
      • 0.605
      • 15.350
    • Conventional Or Drum-In-Hat Type Rotor: Conventional
    • Harmonize Code: 8708.30.5030
    • Inside Diameter:
      • 194.000
      • 7.638
    • Center Hole Diameter:
      • 2.677
      • 68.000
    • Stud/Lug Hole Quantity: 5
    • Solid Or Vented Type Rotor: Vented
    • Nominal Thickness:
      • 0.465
      • 11.800
    • Surface Type: Smooth
    • Outside Diameter:
      • 11.811
      • 300.000
    • Mounting Bolt Hole Quantity: 5
    • Discard Thickness:
      • 0.394
      • 10.000
    • UNSPSC Code: 25171715
    • Mounting Bolt Hole Circle Diameter:
      • 112.000
      • 4.409
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
  • Sold Each. Purchase quantity 1 for 1 wheel

This Part Fits the Following OEM/Substitute Numbers:
083-3321, 120.33127, 121.33127, 12133127, 125.33127, 125.33127CRY, 126.33127CSL, 126.33127CSR, 126.33127SL, 126.33127SR, 127.33127CL, 127.33127CR, 127.33127L, 127.33127R, 128.33127CL, 128.33127CR, 128.33127L, 128.33127R...VIEW MORE

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Rear

Raybestos
  • R-Line
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Disulfide, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.

This Part Fits the Following OEM/Substitute Numbers:
16123, 8235A, H18052, H5088, H8235, HW16123

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Rear

Raybestos
  • R-Line
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Disulfide, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.

This Part Fits the Following OEM/Substitute Numbers:
16122, H8227

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front

Textar
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Electronic

Additional Fitment Information:
Vehicle
2013 - Audi A4 allroad

Textar
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Formulated
  • with 320mm Brake Disc
  • with Pad Wear Sensor
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front

Textar
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Formulated
  • with 345mm Brake Disc
  • with Pad Wear Sensor
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front

Textar
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Formulated
  • with 300mm Brake Disc
  • with Shims
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Rear

TRW
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Premium OE Formulated
  • with 320mm Brake Disc
  • with Pad Wear Sensor
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front

TRW
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Premium OE Formulated
  • with 345mm Brake Disc
  • with Pad Wear Sensor
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Position
2013 - Audi A4 allroad Front
Showing 1 - 10 of 122 products

Loading...