Select a vehicle to find exact fit parts

Subaru Parts

Choose a Year for your Subaru

2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968

Showing 1 - 10 of 20567 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2013 Subaru Outback Trailer Hitch - Rear 4 Cyl 2.5L CURT

Class 3 Hitch; 2in. Receiver; Select Subaru Legacy; Outback (Exposed Main Body)
4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
CURT 13390 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Subaru Legacy; Outback
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- Install Time: 45 Minutes
- WC Tongue Weight: 600
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Legacy and Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2013 - Subaru Outback	H	2498	Rear	4 Cyl 2.5L	2.5i	152

2 In Stock

Limited Time Offer

$367.12 CAD

$440.54 CAD


Brand	CURT
Part #	13390
Condition	New
Warehouse	C

2013 Subaru Outback Air Filter K&N

Replacement Air Filter
Panel; H-.938 in.; L-8.75 in.; W-8.563 in.
K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Machine Washable: Yes
- Product Box Height: 11.560 In. (294mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 10.440 In. (265mm)
- Item Height: 0.938 In. (24mm)
- Prop 65 (C, R or CR): Cr
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 8.563 In. (217mm)
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.06 Oz (31 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 8.750 In. (222mm)
- Package Type: Box
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:

04861688AA, 16546AA090, 16546AA10, 16546AA10A, 16546AA120, 16546AA12A, 16546AA90, 2820304, 46051FG000, 46914, 49012, 88914, A1527, A3109C, A35592, AD3984, AD5592, C2201...VIEW MORE

Additional Fitment Information:

Vehicle
2013 - Subaru Outback

5 In Stock

Limited Time Offer

$88.99 CAD

$106.79 CAD


Brand	K&N
Part #	33-2304
Condition	New
Warehouse	C

2012 Subaru Forester Engine Air Filter K&N

Replacement Air Filter
Panel; H-.938 in.; L-8.75 in.; W-8.563 in.
K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Machine Washable: Yes
- Product Box Height: 11.560 In. (294mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 10.440 In. (265mm)
- Item Height: 0.938 In. (24mm)
- Prop 65 (C, R or CR): Cr
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 8.563 In. (217mm)
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.06 Oz (31 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 8.750 In. (222mm)
- Package Type: Box
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Additional Fitment Information:

Vehicle
2012 - Subaru Forester

5 In Stock

Limited Time Offer

$88.99 CAD

$106.79 CAD


Brand	K&N
Part #	33-2304
Condition	New
Warehouse	C

1983 Subaru Standard Engine Oil Filter K&N

Oil Filter
H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE

Additional Fitment Information:

Vehicle
1983 - Subaru Standard

1 In Stock

Limited Time Offer

$21.68 CAD

$26.02 CAD


Brand	K&N
Part #	HP-1002
Condition	New
Warehouse	C

2002 Subaru Outback Engine Oil Filter 6 Cyl 3.0L K&N

Oil Filter
H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2002 - Subaru Outback	H	3000	6 Cyl 3.0L	VDC	-

42 In Stock

Exclusive Deal

$23.90 CAD

$28.68 CAD


Brand	K&N
Part #	K33HP-1004
Condition	New
Warehouse	B

2023 Subaru BRZ Engine Oil Filter K&N

Oil Filter
H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:

Vehicle
2023 - Subaru BRZ

42 In Stock

Exclusive Deal

$23.90 CAD

$28.68 CAD


Brand	K&N
Part #	K33HP-1004
Condition	New
Warehouse	B

2004 Subaru Legacy Engine Oil Filter 4 Cyl 2.5L K&N

Oil Filter
H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2004 - Subaru Legacy	H	2458	4 Cyl 2.5L	-

128 In Stock

Exclusive Deal

$24.46 CAD

$29.35 CAD


Brand	K&N
Part #	K33HP-1008
Condition	New
Warehouse	B

2013 Subaru Outback Engine Oil Filter 4 Cyl 2.5L K&N

Oil Filter
H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2013 - Subaru Outback	H	2498	4 Cyl 2.5L	2.5i	152

128 In Stock

Exclusive Deal

$24.46 CAD

$29.35 CAD


Brand	K&N
Part #	K33HP-1008
Condition	New
Warehouse	B

2005 Subaru Impreza Spark Plug Denso

Spark Plug Platinum TT
Gap 0.040 Platinum TT - Twin-Tip Technology Design with Platinum Center Electrode and Titanium Enhanced Ground Strap
Spark Plug Platinum TT
Spark Plug - Platinum TT
Product Attributes:
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 16.0
- Reach: 19.00
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Titanium Enhanced Twin-tip
- Manufacturer Heat Range: 16
- Ground Configuration: Twin-tip
- Pre-Gap Size: 1.0
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
Twin-Tip design enables faster flame propagation for more complete combustion.
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0000-18-BP01, 0000-18-F287, 0000-18-JE41, 0000-18-KJ13, 003 159 31 03, 003 159 54 03, 003 159 66 03, 003 159 67 03, 003 159 68 03, 003 159 71 03, 003 159 81 03, 003 159 94 03, 003 159 97 03, 004 159 07 03, 004 159 19 03, 09482-00549, 0K23A-18-110, 101 000 044 AA..., 101 905 611 A, 101 905 631 A, 101 905 631 F, 101 905 631 G, 12 12 9 068 016, 12 12 9 070 999, 12582002, 1822A030, 1822A068, 18814-11051, 18817-11051, 18823-11101, 18823-111012, 18826-11101, 18839-11051, 19302724, 19302726, 19307140, 21020184, 21021362, 21021363, 21024004, 21024005, 21024774, 21024775, 21025102, 21025103, 22401 AA570, 22401 AA650, 22401 AA65A, 22401-0B015, 22401-1P114, 22401-1P115, 22401-1W614, 22401-1W615, 22401-20J05, 22401-27N15, 22401-27N65, 22401-40P15, 22401-40P65, 22401-50Y04, 22401-50Y05, 22401-53J05, 22401-5M075, 22401-7B004, 22401-7B005, 22401-85E14, 22401-85E15, 22401-97E15, 22401-97E64, 22401-97E65, 22401-9E014, 22401-9E015, 27410-23700, 27410-25000, 27410-37100, 27410-3C000, 32 00 5952, 3300 2750, 4318 138, 4504 277, 455 0157, 4606 823AB, 4609 040, 4609 076, 4609 079, 4796 779, 5-86205-236-0, 5-86205-237-0, 5098 167AA, 5098 168AA, 5149 060AB, 5600 6240, 5602 7275, 5602 8189, 5602 8236AA, 5604 1402AB, 5613796, 5614106, 5614285, 5614286, 5962H8, 5962J1, 8-92063-303-0, 8-97111-376-0, 8-97125-969-0, 8-97170-268-0, 8350 0411, 88901014, 90080-91145, 90080-91184, 90541059, 90919-01164, 90919-01168, 90919-01168-83, 90919-01169, 90919-01176, 90919-01192, 90919-01196, 90919-01197, 90919-01217, 90919-01219, 90919-01240, 90919-01244, 90919-01265, 90919-C1002, 91175704, 91175705, 91176020, 9195166, 93176801, 94856823, 94859009, 94859446, 94859448, 98079-541-4G, 98079-541-5G, 98079-551-4G, 98079-551-4H, 98079-551-4J, 98079-551-4N, 98079-551-4P, 98079-551-5G, 98079-551-5H, 98079-551-5J, 98079-551-5N, 98079-551-5V, 98079-551-7S, 98079-551-7V, 9807B-551-5W, 9807B-551-7W, AGSP 32FS-M, AGSP 32FSMF4, AGSP32C, AGSP32F, AGSP32FM, AGSP32FP, AGSP32PP, AJ84575, AW343939, AW350015, BP01-18-110, BP02-18-110, BP11-18-110, BP13-18-110, BP13-18-110A, BP8J-18-110, BP8K-18-110, C2A1535, F287-18-110, F288-18-110, JE41-18-110, JE42-18-110, KJ13-18-110, KJ14-18-110, LR0 05253, LR0 21006, MD313442, MD339798, MD350292, MD361067, MD372553, MD376962, MN163235, MS851335, MS851357, MS851501, MS851571, MS851572, MS851622, MS851727, MS851728, NCA3850EA1, NCA3850GA1, NCA3850HA1, NCA3850HA2, NLP 000030, NLP 100290L, NLP 100320, PK16TT, SP00ZFR5AP, SP0RC10YC4, SP0RC12ECC, SP0RC12LC4, SP0RC12LYC, SP0RC12YC5, SP0ZFR5F11, SPRC10PYP4, SPRC12MCC4, T0714540, Z6B7-18-110, ZJY6-18-110, ZM01-18-110 VIEW MORE

Additional Fitment Information:

Vehicle	Sub Model
2005 - Subaru Impreza	RS

9 In Stock

Exclusive Deal

$10.45 CAD

$12.54 CAD


Brand	Denso
Part #	D454503
Condition	New
Warehouse	B

UPC: 042511045033

1992 Subaru Legacy Trailer Hitch - Rear 4 Cyl 2.2L CURT

Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Legacy; Outback
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
CURT 12270 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Legacy; Outback
Class II 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 45 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Subaru Legacy and Outback (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.