Weiand Parts


Showing 1 - 10 of 19 products
Image
SKU
Product
Rating
Price

Weiand
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; IMCalifornia Legal; High Rise; Square Carb Mounting Flange; 4.37 in. Front/5.06 in. Rear Height; No EGR Provision; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; IMCalifornia Legal; High Rise; Square Carb Mounting Flange; 4.37 in. Front/5.06 in. Rear Height; No EGR Provision; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Rear Height: 5.060 In.
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Ford Small Block V8
    • RPM Range: 1500-6800
    • Manifold Type: High Rise
    • Finish: Satin
    • Position: Lower
    • Number of Carbs: One
    • Usage: Street/strip
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Barrel: Four
    • Emission: Without Egr
    • Fuel System Type: Carb
  • Features:
    • High Rise/Dual Plane Design
    • Port Size 1.82 in. Height x 1.05 in. Width
    • Height Front 4.37 in.
    • Rear 5.06 in.
    • 1500-6800 RPM Power Band
    • No EGR Provisions
    • Square Carburetor Mounting Flange
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! *** Fits GT-40 and TFS heads.

Additional Fitment Information:
Vehicle Block CC Position Engine Engine VIN CID
1985 - Ford Bronco V 5753 Lower 8 Cyl 5.8L H 351

Weiand
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Rear Height: 6.750 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size: Ford Big Block V8
    • RPM Range: Idle-6800
    • Manifold Type: Low Rise
    • Finish: Satin
    • Position: Lower
    • Front Height: 5.250 In.
    • Number of Carbs: One
    • Usage: Street/strip
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Barrel: Four
    • Emission: Without Egr
    • Fuel System Type: Carb
  • Features:
    • Port Size 2.15 in. Height x 1.89 in. Width
    • High Rise/Dual Plane Design
    • Height Front 5.25 in.
    • Rear 6.75 in.
    • Idle-6800 RPM Power Band
    • No EGR Provisions
    • Square Carburetor Mounting Flange
  • Weiand is no stranger to the performance aftermarket. Since the 1930s, Weiand has been delivering serious performance parts to street /strip enthusiasts, marine customers and hard core racers. Times have changed as bigger motors, higher RPMs, better ignition systems and ultra efficient cylinder head designs have generated a need for better manifold technology. Weiand has delivered!

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1976 - Ford Custom 500 V - Lower 8 Cyl 7.5L 460

Weiand
  • Aluminum; Six-Blade Impeller; Twisted Snout Design; Short Style; Not For Competition Use; Satin Finish
  • Action +Plus Water Pump; Aluminum; Six-Blade Impeller; Twisted Snout Design; Short Style; Not For Competition Use; Satin Finish;
  • Action +Plus Water Pump
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Style: Street/high-performance
    • Engine Make/Size: Chevy Small Block (262-400)
    • Type: Mechanical
    • Finish: Satin
  • Features:
    • Lightweight Aluminum
    • CNC Machined
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six Blade Stamped Steel Anti-Cavitation Impeller For Max Flow
    • 100% Leak Tested
    • Best Value In Water Pumps/Unbelievable Low Price
    • Twisted Snout Design For Updated Style
    • Permanent Mold Castings For Improved Appearance
    • Extra HD 1/2 in. Thick Pulley Hubs For Max. Durability
    • Zinc Plated Back Covers/Hdw For Long Life/Corrosion Resistance
  • Weiand's light weight, performance aluminum mechanical Action–Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast–iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand's exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1980 - Buick Century V - 8 Cyl 5.0L 305

Weiand
  • SuperCharger Gasket and Seal Kit
  • SuperCharger Gasket and Seal Kit; For 174 Series Blower; For Use w/Superchargers PN[77-174FSB-1/77-174FSBP-1]; Includes Front Cover/Nose Seal/Rear Cover Gaskets;
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Blower Size: 174
    • Package Quantity: Sold As Kit
  • Features:
    • Gasket And Seal Kit
  • If you're rebuilding or taking apart your supercharger, then you will need these Weiand supercharger gasket sets. They include the necessary gaskets and seals to keep your supercharger operating at the proper boost levels. Available for a variety of Weiand superchargers, these Weiand supercharger gasket sets will provide you with quality gaskets and get you back on the road quicker.
  • Fitment Warning:
    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more


Weiand
  • Carburetor Sealing Plate
  • Carburetor Sealing Plate; Allows Square Bore Carb. To Mount to Spread Bore Manifold w/Dual Bolt Pattern; 1/16 in. Thick; Pair;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Includes Two Gaskets
  • Allows a Square bore carburetor to mount directly to a spread bore manifold with dual bolt pattern and seal properly
  • Fitment Warning:
    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

This item is not specific to any vehicle. Click here to learn more


Weiand
  • 177 B Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Pro-Street SuperCharger Intake Manifold; Lower; 177 Blower; Satin Finish;
  • Pro-Street SuperCharger Intake Manifold
  • Product Attributes:
    • Position: Lower
    • Number of Carbs: None; For Fuel Injection
    • Usage: Racing
    • WARNING CA Proposition 65: No
    • Cylinder Head Type: Standard
    • Engine Make/Size: Chevy Small Block V8
    • RPM Range: N/a
    • Emission: N/a
    • Blower Size: 177
    • Finish: Satin
  • Features:
    • Intake Manifold
  • Weiand is no stranger to the performance aftermarket. Since the 1930s, Weiand has been delivering serious performance parts to street /strip enthusiasts, marine customers and hard core racers. Times have changed as bigger motors, higher RPMs, better ignition systems and ultra efficient cylinder head designs have generated a need for better manifold technology. Weiand has delivered!

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1977 - Buick Century V - Lower 8 Cyl 5.0L 305

Weiand
  • Aluminum; Six Blade Impeller; Twisted Snout; Not For Competition Use; Satin Finish
  • Action +Plus Water Pump; Aluminum; Six Blade Impeller; Twisted Snout; Not For Competition Use; Satin Finish;
  • Action +Plus Water Pump
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Style: Street/high-performance
    • Engine Make/Size: Chevy Small Block (262-400)
    • Type: Mechanical
    • Finish: Satin
  • Features:
    • Lightweight Aluminum
    • CNC Machined
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six Blade Stamped Steel Anti-Cavitation Impeller For Max Flow
    • 100% Leak Tested
    • Best Value In Water Pumps/Unbelievable Low Price
    • Twisted Snout Design For Updated Style
    • Permanent Mold Castings For Improved Appearance
    • Extra HD 1/2 in. Thick Pulley Hubs For Max. Durability
    • Zinc Plated Back Covers/Hdw For Long Life/Corrosion Resistance
  • Weiand's light weight, performance aluminum mechanical Action–Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast–iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand's exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet Monte Carlo V - 8 Cyl 5.0L 305

Weiand
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise/Dual Plane; Square Bore Carb Mounting Flange; 3.82 in. Front H/4.75 in. Rear Height; Satin Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Rear Height: 4.750 In.
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Ford Small Block V8
    • RPM Range: Idle-5500
    • Manifold Type: Low Rise
    • Finish: Satin
    • Position: Lower
    • Front Height: 3.820 In.
    • Number of Carbs: One
    • Usage: Street/strip
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Barrel: Four
    • Emission: Without Egr
    • Fuel System Type: Carb
  • Features:
    • Low Rise/Dual Plane Design Builds Maximum Torque
    • Square Bore Carburetor Mounting Flange
    • Permanent Mold Castings Process For Lighter/Smoother/Better Looks
    • Exhaust Crossover For Improved Street Drivability
    • Idle-5500 RPM Power Band
    • Height Front 3.82 in.
    • Rear 4.75 in.
    • Port Size 1.82 in Height x 1.02 in. Width
    • Satin Finish
  • Don't settle for weak performance. The all new SB Chevy Street Warrior delivers brutal low-end torque and killer horsepower throughout useable RPM range! The battleground has changed in the performance world. Most of the intakes on the market were developed 20+ years ago when typical engines were 283-350 cubic inches. Not so anymore. With the popularity of larger stroker engines and more efficient cylinder head and cam designs came the need for intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, the Street Warrior intake rises to the challenge and delivers the performance to conquer the competition! Want maximum horsepower and torque from today's engines? Choose Street Warrior! ** Designed specifically for 1955-86 and 1987 & later with aluminum heads (Corvette) Small Block Chevy Gen I engine applications

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1986 - Ford Bronco V - Lower 8 Cyl 5.0L 302

Weiand
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Square Bore Carburetors May Require PN[9006] To Seal Properly
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Rear Height: 5.940 In.
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Chrysler Small Block V8
    • RPM Range: Idle-6000
    • Manifold Type: High Rise
    • Finish: Satin
    • Position: Lower
    • Front Height: 4.880 In.
    • Number of Carbs: One
    • Usage: Street/strip
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Barrel: Four
    • Emission: Without Egr
    • Fuel System Type: Carb
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! ** Square bore carburetors may require plate P/N 9006 to seal properly. Rotary A/C compressor will not clear on 1978 and later applications. The water cross over has 3/4 in. NPT x 1; 3/8 in. NPT x 2; 1/8 in. NPT x 1. The Manifold also has a 3/8 in. NPT Vacuum Port.

Additional Fitment Information:
Vehicle Block CC Position Engine Engine VIN CID
1979 - Chrysler Cordoba V - Lower 8 Cyl 5.9L L 360

Weiand
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Rear Height: 5.940 In.
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Chrysler Small Block V8
    • RPM Range: Idle-6000
    • Manifold Type: High Rise
    • Finish: Satin
    • Position: Lower
    • Front Height: 4.880 In.
    • Number of Carbs: One
    • Usage: Street/strip
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Barrel: Four
    • Emission: Without Egr
    • Fuel System Type: Carb
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! ** Square bore carburetors may require plate P/N 9006 to seal properly. Rotary A/C compressor will not clear on 1978 and later applications. The water cross over has 3/4 in. NPT x 1; 3/8 in. NPT x 2; 1/8 in. NPT x 1. The Manifold also has a 3/8 in. NPT Vacuum Port.

Additional Fitment Information:
Vehicle Position
1979 - Dodge RD200 Lower
Showing 1 - 10 of 19 products

Loading...