Centerforce Parts


Showing 1 - 10 of 52 products
Image
SKU
Product
Rating
Price

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: N1716 - Centerforce Accessories, Throw Out Bearing / Clutch Release Bearing
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - Chevrolet C10 V - 8 Cyl 7.4L 454

Centerforce
  • Centerforce(R) I and II; Clutch Friction Disc
  • 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
  • The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
  • Clutch Disc
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 10.400 In.
    • Title: Pn: 384193 - Centerforce I And Ii, Clutch Friction Disc
    • Material: Organic
    • Spline Size: 1.03125 In. - 10
  • Features:
    • High Quality Friction Material
    • Smooth Engagement
  • Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Jeep CJ5 L - 6 Cyl 4.2L 258

Centerforce
  • Dual Friction(R); Clutch Pressure Plate and Disc Set
  • 10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 521 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
  • The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
  • Dual Friction® Clutch Pressure Plate And Disc Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: Df193890 - Dual Friction, Clutch Pressure Plate And Disc Set
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Dual Friction[r] Design
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1999 - Dodge Dakota V 3906 6 Cyl 3.9L Base 239

Centerforce
  • Dual Friction(R); Clutch Pressure Plate and Disc Set
  • 10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 529 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
  • The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
  • Dual Friction® Clutch Pressure Plate And Disc Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: Df193675 - Dual Friction, Clutch Pressure Plate And Disc Set
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Dual Friction[r] Design
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Jeep CJ5 L - 6 Cyl 3.8L 232

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 0.982 in. Height; 2.740 in. Major Outside Diameter; 1.442 in. Inside Diameter; Clip Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: N1439 - Centerforce Accessories, Throw Out Bearing / Clutch Release Bearing
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle
1979 - Jeep CJ5

Centerforce
  • Dual Friction(R); Clutch Pressure Plate and Disc Set
  • 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; 563 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Alignment Tool
  • The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
  • Dual Friction® Clutch Pressure Plate And Disc Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: Df098391 - Dual Friction, Clutch Pressure Plate And Disc Set
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Dual Friction[r] Design
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Jeep Liberty V - 6 Cyl 3.7L Renegade 226

Centerforce
  • Centerforce(R) II; Clutch Pressure Plate
  • 11 in. Dia.; 3 Bolt Pattern; 572 ft/lbs Torque; Flat; Nodular Iron Pressure Plate
  • Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
  • Centerforce II Clutch Pressure Plate
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 11.000 In.
    • Title: Pn: Cft165552 - Centerforce Ii, Clutch Pressure Plate
    • Type: Na
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Chevrolet K30 V - 8 Cyl 5.7L 350

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 1.625 in. Height; 2.740 in. Major Outside Diameter; 1.255 in. Inside Diameter; Clip Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: N1463 - Centerforce Accessories, Throw Out Bearing / Clutch Release Bearing
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle
1982 - Dodge B150

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 1.623 in. Height; 2.737 in. Major Outside Diameter; 1.440 in. Inside Diameter; Clip Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: N1764 - Centerforce Accessories, Throw Out Bearing / Clutch Release Bearing
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1998 - Dodge Dakota V 3906 6 Cyl 3.9L SLT 239

Centerforce
  • Centerforce(R) Accessories; Clutch Alignment Tool
  • 10 Spline; 1 1/8 in. Input Shaft; 0.590 in. Diameter
  • The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.
  • Clutch Alignment Tool
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Title: Pn: 53010 - Centerforce Accessories, Clutch Alignment Tool
  • Features:
    • Clutch Alignment Tool
  • Alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application, leaving no need to replace the alignment tool with each clutch.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1980 - Jeep Cherokee V - 8 Cyl 5.9L Base 360
Showing 1 - 10 of 52 products

Loading...