BD Diesel Parts


Showing 1 - 10 of 295 products
Image
SKU
Product
Rating
Price

BD Diesel
  • Includes Cam Castor Adj./Retaining Plate Castor Adj./Cam Holder Castor Adj./Hardware/1 3/8 Hole Saw/Jig Castor Adj.
  • Cam Caster Adjustor Kit; Includes Cam Castor Adj./Retaining Plate Castor Adj./Cam Holder Castor Adj./Hardware/1 3/8 Hole Saw/Jig Castor Adj.;
  • Cam Caster Adjustor Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Suspension Lifts/Level Lifts/Larger Tires Can Cause Neg. Castor
    • Up To 3 Degrees of Adjustment
    • Complete Kit Makes For A Quick And Easy Install
    • Prevents A Number Of Potential Steering Problems
    • Reduces Tire Cupping And Helps Steering Wheel Return To Center
    • Gas And Diesel
  • Caster, the steering pivot angle, is tilted either forward (negative) or rearward (positive) from vertical. Installing a suspension lift or leveling kit will cause a reduction in steering caster angle. This can result in wandering, wobble, and general steering instability. Larger tires can exaggerate the problem and require more positive caster. By installing BD's Cam Caster Adjusting kit on the radius control arms of the Ford Super Duty's, you can correct the problem by increasing the caster angle to gain stability.

Additional Fitment Information:
Vehicle Block CC Engine CID
2013 - Ford F-250 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • BD Tie Rod Upgrade;
  • BD Tie Rod Upgrade
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Tie Rod Shaft And Inner Ball Joint Is 1.5X Larger Than OEM
    • Larger Greaseable Ball Joints For Long Service Life
    • Optional Zerk Fitting Included For Install
  • The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the band-aided Tie Rod Sleeves.

Additional Fitment Information:
Vehicle
2015 - Chevrolet Silverado 3500 HD

BD Diesel
  • 4 in. Exhaust Size; Cast Iron
  • Exhaust Brake; 4 in. Exhaust Size; Cast Iron;
  • Exhaust Brake
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Installs Inline Into Existing Exhaust System
    • Retains Use Of Oem Dash Button
    • Cast Iron Construction Withstands Heat Cycle And Is Robust For Long Life
    • No Air Compressor Reduces System Maintenance And Point Of Failure
    • Up To 150 Retarding Hp
    • Quick - Universal Placement Of Brake
    • Superior Back Pressure Regulation Through RPM Range
    • Great For Slowing Your Vehicle On Steep Descents
  • The BD Diesel Electronic Exhaust Brake increases your towing confidence by creating up to 150 retarding HP! Without the need of an air compressor and air lines, this electronic inline brake is easy to install and features less maintenance compared to conventional air brakes. BD's exclusive Variable Orifice Technology creates uniform controlled pressure regulation through the RPM range, for reliable consistent engine braking.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2014 - Ram 2500 L - 6 Cyl 6.7L Big Horn 408

BD Diesel
  • 5 in. Exhaust Size; Cast Iron
  • Exhaust Brake; 5 in. Exhaust Size; Cast Iron;
  • Exhaust Brake
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Installs Inline Into Existing Exhaust System
    • Retains Use Of Oem Dash Button
    • Cast Iron Construction Withstands Heat Cycle And Is Robust For Long Life
    • No Air Compressor Reduces System Maintenance And Point Of Failure
    • Superior Back Pressure Regulation Through RPM Range
    • Great For Slowing Your Vehicle On Steep Descents
  • The BD Diesel Electronic Exhaust Brake increases your towing confidence by creating up to 150 retarding HP! Without the need of an air compressor and air lines, this electronic inline brake is easy to install and features less maintenance compared to conventional air brakes. BD's exclusive Variable Orifice Technology creates uniform controlled pressure regulation through the RPM range, for reliable consistent engine braking.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2014 - Ram 2500 L - 6 Cyl 6.7L Outdoorsman 408

BD Diesel
  • Pressure Controller; Wiring Harness
  • Automatic Transmission Pressure Controller; Pressure Controller; Wiring Harness;
  • Automatic Transmission Pressure Controller
  • Product Attributes:
    • Trans Year:
      • 2011
      • 2012
      • 2013
      • 2014
      • 2015
      • 2016
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
    • Trans Model: Allison- 1000 (auto) 5 Speed
  • Features:
    • 25 Percent To 115 Percent More Theoretical Holding Power
    • Delivers Up to 275psi Line Pressure At WOT
    • Only Active When Boost Is Over 15psi
    • No Transmission Relearn Required
    • Installs In Under An Hour
  • Allison transmissions utilize variable line pressure that adjusts to different engine load to improve fuel economy. The problem with this is that it drops line pressure after a shift, causing clutch slippage and failure in higher powered trucks. The BD pressure controller module boosts line pressure up to 275psi when the engine is over 15psi boost and runs stock pressure under normal conditions prevent harsh shifting. The kit is fully plug-and-play. It plugs into factory connectors and requires no special setup.

Additional Fitment Information:
Vehicle Block CC Engine Transmission Manuf. Code CID
2012 - GMC Sierra 3500 HD V 6599 8 Cyl 6.6L 1000 403

BD Diesel
  • 64.0 mm Billet Compressor Wheel; Up To 85 lb./min Of Airflow; Max 650 Crank HP;Not Legal For Sale Or Use In California
  • Screamer Performance Exchange Turbo; 64.0 mm Billet Compressor Wheel; Up To 85 lb./min Of Airflow; Max 650 Crank HP;
  • Screamer Performance Exchange Turbo
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • 64.0mm Billet Compressor Wheel
    • Up To 80Lb/Min Of Airflow
    • More Boost
    • Lower Drive Pressure And Lower EGT
    • Suggested Max 650 Crank Hp
  • BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Engine VIN CID
2011 - Chevrolet Silverado 3500 HD V 6599 LML 8 Cyl 6.6L 8 403

BD Diesel
  • Includes New Studs/Spacers/Nuts;50 State Legal Aftermarket Downpipe Required - Some Modification Necessary
  • Exhaust Manifold; Includes New Studs/Spacers/Nuts;
  • Exhaust Manifold
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Utilize 3 Additional Exhaust Stud Locations
    • BD Thick Wall High-Silicon Ductile Cast Iron Resists Thermal Warping
    • 15Mm Longer Exhaust Studs Plus Spacers
    • New Studs/Spacers/Nuts Included
    • Replaces Ford OEM Part Numbers/Bl3Z-9430-B/ Bl3Z-9430-D/Bl3Z-9431-B/Bl3Z-9431-D
  • The 2011-2016 Ford 3.5L has an inherent design flaw where not all of the OE stud locations are utilized by the OE manufacturer which leads to warped exhaust manifolds, broken exhaust studs and blown manifold gaskets. The cylinder head on Fords 3.5L Gas Ecoboost has threaded holes for 11 exhaust studs to be used, however the OE manifold only utilizes 8 of those stud locations. BD has designed a manifold that not only utilizes all 11 stud locations, but also improves exhaust flow and has improved durability, the way it should have come from the factory. BDs Ford 3.5L exhaust manifolds are made from thicker-walled high silicone ductile iron designed to resist thermal warping. Each kit includes 22 exhaust spacers and 22 class 8.8 studs designed to further improve thermal durability.

Additional Fitment Information:
Vehicle Block CC Engine CID
2014 - Ford F-150 V 3496 6 Cyl 3.5L 213

BD Diesel
  • Includes Steering Box Support/Sector Shaft Bolt/Bearing Assy/Hardware/Thread Lock
  • Steering Stabilizer Bar; Includes Steering Box Support/Sector Shaft Bolt/Bearing Assy/Hardware/Thread Lock;
  • Steering Stabilizer Bar
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • The Wobble Stopper
    • Eliminates Steering Wander And Wobble Caused By Shaft Play
    • Designed For Easy Bolt-On Installation In About One Hour
    • Virtually Eliminates Frame Flex At Steering Box Mounting Point
    • More Positive Steering Feel
    • Silver Vein Powdercoated For Corrosion Resistance
    • Greaseable High Quality Bearing For Reliable Operation
    • High Strength Mounting Hardware
    • 12 Months or 24000 Mile Warranty
  • BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!

Additional Fitment Information:
Vehicle Block CC Engine Drive Type CID
2018 - Ram 2500 L - 6 Cyl 6.7L 4WD 408

BD Diesel
  • Complete Trans; Includes Billet Input Shaft/Pressure Control Module; Includes Complete Torque Converter; Enhanced Stall; Stage 5
  • Transmission Kit; Complete Trans; Includes Billet Input Shaft/Pressure Control Module; Includes Complete Torque Converter; Enhanced Stall; Stage 5;
  • Transmission Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
    • Trans Model: Dodge- 68rfe (auto) 6 Speed
  • Features:
    • Upgraded Valve body
    • Upgraded Governor Solenoid
    • Upgraded Governor Pressure Transducer
    • No Shuttle Shifting Problems
    • Aluminum HD Pan
    • Torque Convertor Enhanced Stall
    • Stamped Forged 1 Piece Cover
    • More Efficient Operation
    • Furnace Brazed Fins
    • No Race Abuse Covered
  • Transmission- Hard anodized valve body and new solenoid pack installed in every unit. Custom valve body separator plate with gaskets increases line pressure while stopping internal cross leaks. Heavy duty cam & roller design low reverse one way clutch. New 4C billet spring retainer. Steel girdle added to 2C piston to allow for more clutches and broader apply area. BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum. Over Drive clutches 33% increase & 2C clutches 33% increase. Custom Big Stack overdrive shaft. BD reinforced accumulator plate. TCC limit valve machined and sleeved to address high wear area with in pump. BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex. BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required. Performance Transmission but with the added touch of a Billet Input Shaft to take the 'snap' from rapid throttle and high horsepower. Torque Convertor- Enhanced Stall. Machined Pistons, HD Springs Absorb Shock of Engagement. Stamp forged 1 pc cover, eliminates warpage from clutch heat. Taller cover can be rebuilt more often. Self-centering teeth design increases contact decreases wear and chatter. Riveting process ensures alignment & eliminates vibration or embrittlement from welding. Furnaced brazed fins reduces internal leakage for improved fluid coupling efficiency. Warranty- Parts- 36 Month. 150,000 Miles; Labor 12 Months/24000 Miles.

Additional Fitment Information:
Vehicle Block CC Engine Transmission Manuf. Code Sub Model Drive Type CID
2011 - Ram 2500 L - 6 Cyl 6.7L 68RFE ST 4WD 408

BD Diesel
  • Complete Trans; Includes Pressure Control Module; Includes Complete Torque Converter; Enhanced Stall; Stage 4
  • Transmission Kit; Complete Trans; Includes Pressure Control Module; Includes Complete Torque Converter; Enhanced Stall; Stage 4;
  • Transmission Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
    • Trans Model: Dodge- 68rfe (auto) 6 Speed
  • Features:
    • Hard Anodized Valve Body And New Solenoid Pack
    • Custom Valve Body Separator Plate
    • Heavy Duty Cam & Roller Design Low Reverse One Way Clutch
    • Deep Sump Oil Pan Adds Extra Fluid And Cooling Capacity
    • Torque Convertor Has Machined Positions
    • Stamped Forged 1 Piece Cover
    • Eliminates Warpage From Clutch Heat
    • Trapezoid Teeth Design
    • Engineered Tighter Tolerances
    • Reduced Overall Weight
  • Transmission- Hard anodized valve body and new solenoid pack installed in every unit. Custom valve body separator plate with gaskets increases line pressure while stopping internal cross leaks. Heavy duty cam & roller design low reverse one way clutch. New 4C billet spring retainer. Steel girdle added to 2C piston to allow for more clutches and broader apply area. BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum. Over Drive clutches 33% increase & 2C clutches 33% increase. Custom Big Stack overdrive shaft. BD reinforced accumulator plate. TCC limit valve machined and sleeved to address high wear area with in pump. BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex. BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required. Performance Transmission but with the added touch of a Billet Input Shaft to take the 'snap' from rapid throttle and high horsepower. Torque Convertor- Enhanced Stall. Machined Pistons, HD Springs Absorb Shock of Engagement. Stamp forged 1 pc cover, eliminates warpage from clutch heat. Taller cover can be rebuilt more often. Self-centering teeth design increases contact decreases wear and chatter. Riveting process ensures alignment & eliminates vibration or embrittlement from welding. Furnaced brazed fins reduces internal leakage for improved fluid coupling efficiency. Warranty- Parts- 36 Month. 150,000 Miles; Labor 12 Months/24000 Miles.

Additional Fitment Information:
Vehicle Block CC Engine Transmission Manuf. Code Sub Model Drive Type CID
2014 - Ram 2500 L - 6 Cyl 6.7L 68RFE Tradesman 4WD 408
Showing 1 - 10 of 295 products

Loading...