Yukon Gear Parts


Showing 1 - 10 of 752 products
Image
SKU
Product
Rating
Price

Yukon Gear
  • Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
  • AMC 20; Timken Brand; Some Flanged AMC Model 20; Timken Brand; Some Flanged
  • Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
  • Axle Bearing/Seal Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Includes Axle Bearing And Seal
    • Services One Side
    • Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
  • Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J10 Rear

Yukon Gear
  • Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
  • AMC 20; Timken Brand; Some Flanged Dana 44; Timken Brand; Some Flanged
  • Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
  • Axle Bearing/Seal Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Includes Axle Bearing And Seal
    • Services One Side
    • Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
  • Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:
Vehicle Position Drive Type
1987 - Jeep Cherokee Rear 4WD

Yukon Gear
  • Yukon Pinion install kit for Dana 60 front differential
  • Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Standard Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
  • Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
  • Pinion Install Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 60 Front
    • Includes Are Pinion Bearings/Races
    • Pinion Seal
    • Crush Sleeve
    • Complete Pinion Shim Kit
    • And Marking Compound w/Brush
  • Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:
Vehicle
1993 - Dodge W350

Yukon Gear
  • Yukon Chromoly Outer Front Axle for Dana 60/Dana 70; 35 Spline; 12in. Long
  • Dana 60; 35 Spline; 12 in. Length Dana 60 Standard Rotation Front; Outer Stub Axle; 4340 Chromoly; 35 Spline; 12 in. Length~Dana 60; Standard Rotation; 35 Spline; 12 in. Length
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Stub Axle
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 60 Dana 70 Differentials
    • 35 Spline
    • Measures 12 in. Long
    • Heavy Duty 4340 Chromoly Construction
    • Uses 5-332X Series U-Joint
    • Front Outer Axle
  • Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

This Part Fits the Following OEM/Substitute Numbers:
ZA W46100

Additional Fitment Information:
Vehicle Position
1985 - Dodge W350 Front Outer

Yukon Gear
  • Yukon Chromoly Front Axle Kit for Dana 60; Inner/Outer Both Sides; 733X U-Joints
  • Dana 60 Dana 60; Standard Rotation
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Chrome-Moly Axle Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 60 Differential
    • 35 Spline Axles
    • Includes Inner And Outer Axles For Both Sides
    • Heavy Duty 4340 Chromoly Construction
    • Includes 733X Series U-Joint And Hardware
  • Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

This Part Fits the Following OEM/Substitute Numbers:
ZA W26026

Additional Fitment Information:
Vehicle Position
1986 - Dodge W350 Front

Yukon Gear
  • Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
  • 35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
  • Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
  • Yukon Hardcore Flange Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 60 w/35 Spline Outer Axles
    • Drive Flange Kit
    • Includes Two Drive Flanges
    • Two Caps And All Necessary Hardware
  • Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:
Vehicle Block CC Engine CID
1976 - Dodge W200 L 3687 6 Cyl 3.7L 225

Yukon Gear
  • Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
  • GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
  • Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
  • Dura Grip Positraction
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 44 w/30 Spline Axles
    • Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
    • Fully Rebuildable Design And Proudly Assembled In The USA
    • Limited Slip Differential w/Composite Clutches
    • All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
    • Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
    • Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
  • Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:
Vehicle Block CC Position Engine Drive Type CID
1993 - Dodge Ramcharger V 5211 Front 8 Cyl 5.2L 4WD 318

Yukon Gear
  • Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
  • GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
  • Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
  • Dura Grip Positraction
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 44 w/30 Spline Axles
    • Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
    • Fully Rebuildable Design And Proudly Assembled In The USA
    • Limited Slip Differential w/Composite Clutches
    • All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
    • Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
    • Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
  • Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:
Vehicle Block CC Position Engine Drive Type CID
1984 - Dodge Ramcharger V - Rear 8 Cyl 5.9L 4WD 360

Yukon Gear
  • Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
  • Dana 44; 30 Splines Dana 44; Disconnect Design; 30 Splines~Dana 44; Standard Rotation; 30 Splines~Dura Grip Posi Carrier Gear Kit
  • Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
  • Spider Gear Set
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 44 w/Dura Grip Positraction
    • Spider Gear Kit
    • Includes Two Side Gears
    • Four Pinion Gears
    • Cross Pin Shaft
    • Roll Pin And Spider Gear Thrust Washers
  • Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Additional Fitment Information:
Vehicle Drive Type
1984 - Dodge Ramcharger 4WD

Yukon Gear
  • Replacement inner axle seal for Dana 30 w/30 spline axles
  • 8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; 8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; Front Inner
  • Replacement inner axle seal for Dana 30 w/30 spline axles (conversion seal).Yukon Mighty seal.
  • Yukon Mighty Axle Seal
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30 w/30 Spline Upgrade
    • Front Inner Axle Seal
  • Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Jeep Cherokee L - Front Inner 4 Cyl 2.1L 126
Showing 1 - 10 of 752 products

Loading...