Motive Gear Parts


Showing 1 - 10 of 24 products
Image
SKU
Product
Rating
Price

Motive Gear
  • Differential Master Bearing Kit - Koyo
  • For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • Motive Gear - Differential Master Bearing Kit - Koyo
  • Differential Bearing Kit
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Dana 70 Hd
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
331K, K35-2036, R70HRMKT, XL-1093-1, ZK D70-HD

Additional Fitment Information:
Vehicle Position
1973 - Chevrolet C30 Pickup Rear

Motive Gear
  • Differential Master Bearing Kit - Koyo
  • For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • Motive Gear - Differential Master Bearing Kit - Koyo
  • Differential Bearing Kit
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Gm 10.5
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
388K, 83-1065-1, K35-2023B, R14RLAMKHT, XL-1065-1, ZK GM14T-C

Additional Fitment Information:
Vehicle Position
1998 - Chevrolet C3500 Rear

Motive Gear
  • For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Gm 9.5
    • Ring Gear Diameter: 9.5
    • Ring & Pinion Gear Ratio: 3.42
    • Pinion Shaft Diameter: 1.876
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Differential Carrier Break: 3.42 Ratio And Higher
    • Pinion Spline Count: 30
    • Cover Bolt Quantity: 14
    • Pinion Gear Tooth Quantity: 12
    • Ring Gear Tooth Quantity: 41
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
1-2010-342, 14038000, 20914868, 24502, 26015981, 26016526, 26058344, 26060559, 40051784, 40173817, 743B730, 84032508, G895342, GM9.5-342-NG, GM95342, SGM9501, YG GM9.5-342

Additional Fitment Information:
Vehicle Position
2009 - Cadillac Escalade Rear

Motive Gear
  • For GM 9.5" (14 Bolt); 3.73 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Gm 9.5
    • Ring Gear Diameter: 9.5
    • Ring & Pinion Gear Ratio: 3.73
    • Pinion Shaft Diameter: 1.876
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Differential Carrier Break: 3.42 Ratio And Higher
    • Pinion Spline Count: 30
    • Cover Bolt Quantity: 14
    • Pinion Gear Tooth Quantity: 11
    • Ring Gear Tooth Quantity: 41
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
1-2010-373, 14037999, 2-2010-373, 24166, 26015719, 26016527, 26054981, 26060556, 26066802, 40033264, 697-322, 743B730A, 88965785, GM9.5-373-NG, GM95373, SGM9502, YG GM9.5-373

Additional Fitment Information:
Vehicle Position
2009 - Cadillac Escalade Rear

Motive Gear
  • For Ford 9.75" (12 Bolt); 4.30 Ratio
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Ford 9.75
    • Ring Gear Diameter: 9.75
    • Ring & Pinion Gear Ratio: 4.30
    • Pinion Shaft Diameter: 1.97
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Pinion Spline Count: 31
    • Cover Bolt Quantity: 12
    • Pinion Gear Tooth Quantity: 10
    • Ring Gear Tooth Quantity: 43
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
F975430

Additional Fitment Information:
Vehicle Position
2001 - Ford E-150 Econoline Club Wagon Rear

Motive Gear
  • For Ford 9.75" (12 Bolt); 4.30 Ratio; 1997-1999.5 Models Require Additional Spacer For Pinion Bearing Preload
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Ford 9.75
    • Ring Gear Diameter: 9.75
    • Ring & Pinion Gear Ratio: 4.30
    • Pinion Shaft Diameter: 1.97
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Pinion Spline Count: 31
    • Cover Bolt Quantity: 12
    • Pinion Gear Tooth Quantity: 10
    • Ring Gear Tooth Quantity: 43
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Additional Fitment Information:
Vehicle Position
1999 - Ford E-150 Econoline Rear

Motive Gear
  • For Dana 70; 3.73 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type:
      • Dana 70
      • Dana 70 Hd
      • Dana 70 U
    • Ring Gear Diameter: 10.5
    • Ring & Pinion Gear Ratio: 3.73
    • Pinion Shaft Diameter: 1.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Differential Carrier Break: 4.10 Ratio And Lower
    • Pinion Spline Count: 29
    • Cover Bolt Quantity: 10
    • Pinion Gear Tooth Quantity: 11
    • Ring Gear Tooth Quantity: 41
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
2-2035-373, 24073, 706999-3X, 717A730B, 72160-5X, D70-373-NG, D70373, YG D70-373

Additional Fitment Information:
Vehicle Position
1974 - Chevrolet C30 Pickup Rear

Motive Gear
  • For GM 10.5" (14 Bolt); 3.75 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
  • Motive Gear - Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Gm 10.5
    • Ring Gear Diameter: 10.5
    • Ring & Pinion Gear Ratio: 3.75
    • Pinion Shaft Diameter: 1.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Rotation: Standard
    • Ring Gear Bolt Quantity: 12
    • Differential Carrier Break: 4.10 Ratio And Lower
    • Pinion Spline Count: 30
    • Cover Bolt Quantity: 14
    • Pinion Gear Tooth Quantity: 12
    • Ring Gear Tooth Quantity: 45
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
1-2023-373, 12471291, 2-2023-373, 24134, 26014192, 26054996, 327721, 40010707, 40058731, 471871, 744A730A, GM105373, GM14T-373-NG, SGM10501, YG GM14T-373

Additional Fitment Information:
Vehicle Position
1974 - Chevrolet C20 Pickup Rear

Motive Gear
  • Differential Master Bearing Kit - Koyo
  • For Ford 8.8" (10 Bolt); Solid Axle; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • Motive Gear - Differential Master Bearing Kit - Koyo
  • Differential Bearing Kit
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type: Ford 8.8
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
305K, 697-101, 83-1043-1, R8.8RMKT, XL-1043-1, ZK F8.8

Additional Fitment Information:
Vehicle Position
1997 - Ford Aerostar Rear

Motive Gear
  • Differential Master Bearing Kit - Koyo
  • For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • Motive Gear - Differential Master Bearing Kit - Koyo
  • Differential Bearing Kit
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Differential Case Design Type:
      • Gm 7.5
      • Gm 7.625
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:
308TK, 697-102, 83-1044-1, R7.5GRMKT, RA320MK, XL-1044-1, ZK GM7.5-B

Additional Fitment Information:
Vehicle Position
1996 - Buick Commercial Chassis Rear
Showing 1 - 10 of 24 products

Loading...