Specialty Products Parts


Showing 1 - 10 of 58 products
Image
SKU
Product
Rating
Price

Specialty Products
  • DODGE ADJUSTMENT CAMS
  • Camber: 1.00 degrees + or -; Caster: 1.50 degrees + or -; ADJUSTABLE (PAIR); Front
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle.

Additional Fitment Information:
Vehicle Position Drive Type
2005 - Dodge Ram 1500 Front Upper RWD

Specialty Products
  • 3/4° FORD SLEEVE
  • 3/4 Degrees SLEEVE; Solid Axle - Coil Spring
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.

Additional Fitment Information:
Vehicle Position
2008 - Ford F-350 Super Duty Front Upper

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1- 1/2 degrees SLEEVE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
1995 - Ford E-150 Econoline Front Upper RWD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1-1/2 Degrees SLEEVE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
1998 - Ford E-150 Econoline Front Upper RWD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1- 1/2 degrees SLEEVE; Dana 35 (Late 1990)
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
1990 - Ford Bronco II Front Upper 4WD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1- 1/2 degrees SLEEVE; Twin I- Beam
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
2003 - Ford F-250 Super Duty Front Upper RWD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1-1/2 Degrees SLEEVE; Twin I-Beam
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
2006 - Ford F-350 Super Duty Front Upper RWD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1- 1/2 degrees SLEEVE; Dana 35
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
1991 - Ford Ranger Front Upper 4WD

Specialty Products
  • 1-1/2° CAMBER/CASTER SLEEVE
  • 1-1/2 Degrees SLEEVE; Dana 35
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45°. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS.

Additional Fitment Information:
Vehicle Position Drive Type
1996 - Ford Ranger Front Upper 4WD

Specialty Products
  • 1-1/2° FORD SLEEVE
  • 1-1/2 Degrees SLEEVE; Solid Axle - Coil Spring
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Birth Defects, Or Other Reproductive Harm.
  • Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.

Additional Fitment Information:
Vehicle Position
2005 - Ford F-250 Front Upper
Showing 1 - 10 of 58 products

Loading...